12-27-2005
use command "print_manifest" to get the information about the system
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello, i have to activate a network interface. for HPUX1100 i can command ifconfig lanx plumb.
Why doesent it works under HPUX10.20?
How can i realise it?
thanks for your help!:) (2 Replies)
Discussion started by: ortsvorsteher
2 Replies
2. HP-UX
Hi guys,
Need a favour or information on how to get it done in configuring a HPUX-11i box?I need the commands which is needed to configure the box...The pdf's in HP site is too much to look at.Is there any advice from u guys on how could i settle this problem? (7 Replies)
Discussion started by: giriplug
7 Replies
3. AIX
Hi All,
Needed commands to find Monitor , chassis & keyboard related information on AIX.
Please please please help.
Thanks
VK (2 Replies)
Discussion started by: Veenak15
2 Replies
4. HP-UX
Hi All
Please somebody send me list of admin commands used for HPUX.
Thanks
Sunanda (2 Replies)
Discussion started by: sunanda
2 Replies
5. Solaris
Hi all
Got another strange one. If I try to enquire about the hardware, the command hangs implying Ive got a hardware issue. So, if I execute :-
iostat -en
sysdef - ( stops at the devices part )
format
cfgadm -al
Anything that searches the devices, then the command hangs.
... (4 Replies)
Discussion started by: sbk1972
4 Replies
6. HP-UX
I am new for HPUX OS and want to pursue my career in HPUX Administration.
I could not able to get following information from HP.com site, that why I need an assistance to know that - can I install HPUX 11i V3 OS on old HP B2000 & B1000 workstations (these workstation are 4 to 5 year old) or not,... (5 Replies)
Discussion started by: girish.batra
5 Replies
7. Solaris
Hi guru
I want to know which company's hardware is more stable means in term of H/W faults or replacement, in case of IBM (AIX), HP (HPUX) & SUN MICROSYSTEM (Solaris) & which order also, if we go through more stable to less stable system.
Regards (1 Reply)
Discussion started by: girish.batra
1 Replies
8. Hardware
Are there any other useful hardware commands to get information about your hardware? Is there any information that can't be found with these commands?
cat /proc/cpuinfo
cat /proc/meminfo
dmesg
lspci
sudo dmidecode
cpuid | more
lspci -v | grep VGA
sudo lspci -v -s 00:02.0
sudo lspci -vvv... (12 Replies)
Discussion started by: cokedude
12 Replies
9. HP-UX
We would like to know a HP Utility or any Unix command that can give the exact status of PCI Gigabit Ethernet cable (lan cable) We had tried to execute
lanscan
ioscan -fnC lan
The status appears to be the same when the cable is plugged & unplugged and also when the lan is disabled &... (5 Replies)
Discussion started by: siva3492
5 Replies
10. HP-UX
I own a 1999 vintage HP Logic Analyzer that runs HPUX 10.20. It is a 9000/775/rock system similar to a Visualize C132L/160L system.
I'm attempting, mostly for the fun of it, to upgrade the existing slow 5MB/s-only SCSI system, with a new-er PCI card. Of course drivers is my major concern. I'd... (2 Replies)
Discussion started by: KeithM
2 Replies
bdf(1M) bdf(1M)
NAME
bdf - report number of free disk blocks (Berkeley version)
SYNOPSIS
type [filesystem|file] ... ]
DESCRIPTION
The command displays the amount of free disk space available either on the specified filesystem for example) or on the file system in which
the specified file (such as is contained. If no file system is specified, the free space on all of the normally mounted file systems is
printed. The reported numbers are in kilobytes.
Options
The command recognizes the following options:
Display information regarding file system swapping.
Report the number of used and free inodes.
Display information for local file systems only (for example,
HFS and CDFS file systems).
Do not sync the file system data on the disk before reporting the usage.
Note that the data reported by may not be up to date.
Report on the file systems of a given
type (for example, or
RETURN VALUE
The command returns 0 on success (able to get status on all file systems), or returns 1 on failure (unable to get status on one or more
file systems).
WARNINGS
If file system names are too long, the output for a given entry is displayed on two lines.
The command does not account for any disk space reserved for swap space, or used for the HFS boot block (8 KB, 1 per file system), HFS
superblocks (8 KB each, 1 per disk cylinder), HFS cylinder group blocks (1 KB - 8 KB each, 1 per cylinder group), and inodes (currently 128
bytes reserved for each inode). Non-HFS file systems may have other items not accounted for by this command.
AUTHOR
was developed by the University of California, Berkeley.
FILES
Static information about the file systems.
Mounted file system table.
File system devices.
SEE ALSO
df(1M), fstab(4), mnttab(4).
bdf(1M)