HPUX Hardware commands. Post: 94056

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

HPUX 10.20 and 11.00 commands

Hello, i have to activate a network interface. for HPUX1100 i can command ifconfig lanx plumb. Why doesent it works under HPUX10.20? How can i realise it? thanks for your help!:)

2. HP-UX

Hi guys, Need a favour or information on how to get it done in configuring a HPUX-11i box?I need the commands which is needed to configure the box...The pdf's in HP site is too much to look at.Is there any advice from u guys on how could i settle this problem?

3. AIX

AIX Hardware commands

Hi All, Needed commands to find Monitor , chassis & keyboard related information on AIX. Please please please help. Thanks VK

4. HP-UX

Need HPUX admin commands lost

Hi All Please somebody send me list of admin commands used for HPUX. Thanks Sunanda

5. Solaris

commands hanging when querying hardware

Hi all Got another strange one. If I try to enquire about the hardware, the command hangs implying Ive got a hardware issue. So, if I execute :- iostat -en sysdef - ( stops at the devices part ) format cfgadm -al Anything that searches the devices, then the command hangs. ...

6. HP-UX

minimum hardware requirement for HPUX 11i V3

I am new for HPUX OS and want to pursue my career in HPUX Administration. I could not able to get following information from HP.com site, that why I need an assistance to know that - can I install HPUX 11i V3 OS on old HP B2000 & B1000 workstations (these workstation are 4 to 5 year old) or not,...

7. Solaris

Which company's hardware is more stable, in case of IBM (AIX), HP (HPUX) & Sun (Solaris)

Hi guru I want to know which company's hardware is more stable means in term of H/W faults or replacement, in case of IBM (AIX), HP (HPUX) & SUN MICROSYSTEM (Solaris) & which order also, if we go through more stable to less stable system. Regards

8. Hardware

Useful Hardware commands

Are there any other useful hardware commands to get information about your hardware? Is there any information that can't be found with these commands? cat /proc/cpuinfo cat /proc/meminfo dmesg lspci sudo dmidecode cpuid | more lspci -v | grep VGA sudo lspci -v -s 00:02.0 sudo lspci -vvv...

9. HP-UX

Status of hardware in HpUx

We would like to know a HP Utility or any Unix command that can give the exact status of PCI Gigabit Ethernet cable (lan cable) We had tried to execute lanscan ioscan -fnC lan The status appears to be the same when the cable is plugged & unplugged and also when the lan is disabled &...

10. HP-UX

HPUX 10.20 SCSI Hardware Drivers

I own a 1999 vintage HP Logic Analyzer that runs HPUX 10.20. It is a 9000/775/rock system similar to a Visualize C132L/160L system. I'm attempting, mostly for the fun of it, to upgrade the existing slow 5MB/s-only SCSI system, with a new-er PCI card. Of course drivers is my major concern. I'd...

LEARN ABOUT MINIX

dh_installinfo

DH_INSTALLINFO(1)						     Debhelper							 DH_INSTALLINFO(1)

NAME

       dh_installinfo - install info files

SYNOPSIS

       dh_installinfo [debhelperoptions] [-A] [file...]

DESCRIPTION

       dh_installinfo is a debhelper program that is responsible for installing info files into usr/share/info in the package build directory.

       From debhelper compatibility level 11 on, dh_install will fall back to looking in debian/tmp for files, if it does not find them in the
       current directory (or wherever you've told it to look using --sourcedir).

FILES

       debian/package.info
	   List info files to be installed.

OPTIONS

       -A, --all
	   Install all files specified by command line parameters in ALL packages acted on.

       --sourcedir=dir
	   Look in the specified directory for files to be installed.  This option requires compat 11 or later (it is silently ignored in compat
	   10 or earlier).

	   Note that this is not the same as the --sourcedirectory option used by the dh_auto_* commands. You rarely need to use this option,
	   since dh_installinfo automatically looks for files in debian/tmp in debhelper compatibility level 11 and above.

       file ...
	   Install these info files into the first package acted on. (Or in all packages if -A is specified).

SEE ALSO

       debhelper(7)

       This program is a part of debhelper.

AUTHOR

       Joey Hess <joeyh@debian.org>

11.1.6ubuntu2							    2018-05-10							 DH_INSTALLINFO(1)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

HPUX 10.20 and 11.00 commands

Discussion started by: ortsvorsteher

2. HP-UX

HPUX config commands

Discussion started by: giriplug