HPUX Hardware commands. Post: 93992

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

HPUX 10.20 and 11.00 commands

Hello, i have to activate a network interface. for HPUX1100 i can command ifconfig lanx plumb. Why doesent it works under HPUX10.20? How can i realise it? thanks for your help!:)

2. HP-UX

Hi guys, Need a favour or information on how to get it done in configuring a HPUX-11i box?I need the commands which is needed to configure the box...The pdf's in HP site is too much to look at.Is there any advice from u guys on how could i settle this problem?

3. AIX

AIX Hardware commands

Hi All, Needed commands to find Monitor , chassis & keyboard related information on AIX. Please please please help. Thanks VK

4. HP-UX

Need HPUX admin commands lost

Hi All Please somebody send me list of admin commands used for HPUX. Thanks Sunanda

5. Solaris

commands hanging when querying hardware

Hi all Got another strange one. If I try to enquire about the hardware, the command hangs implying Ive got a hardware issue. So, if I execute :- iostat -en sysdef - ( stops at the devices part ) format cfgadm -al Anything that searches the devices, then the command hangs. ...

6. HP-UX

minimum hardware requirement for HPUX 11i V3

I am new for HPUX OS and want to pursue my career in HPUX Administration. I could not able to get following information from HP.com site, that why I need an assistance to know that - can I install HPUX 11i V3 OS on old HP B2000 & B1000 workstations (these workstation are 4 to 5 year old) or not,...

7. Solaris

Which company's hardware is more stable, in case of IBM (AIX), HP (HPUX) & Sun (Solaris)

Hi guru I want to know which company's hardware is more stable means in term of H/W faults or replacement, in case of IBM (AIX), HP (HPUX) & SUN MICROSYSTEM (Solaris) & which order also, if we go through more stable to less stable system. Regards

8. Hardware

Useful Hardware commands

Are there any other useful hardware commands to get information about your hardware? Is there any information that can't be found with these commands? cat /proc/cpuinfo cat /proc/meminfo dmesg lspci sudo dmidecode cpuid | more lspci -v | grep VGA sudo lspci -v -s 00:02.0 sudo lspci -vvv...

9. HP-UX

Status of hardware in HpUx

We would like to know a HP Utility or any Unix command that can give the exact status of PCI Gigabit Ethernet cable (lan cable) We had tried to execute lanscan ioscan -fnC lan The status appears to be the same when the cable is plugged & unplugged and also when the lan is disabled &...

10. HP-UX

HPUX 10.20 SCSI Hardware Drivers

I own a 1999 vintage HP Logic Analyzer that runs HPUX 10.20. It is a 9000/775/rock system similar to a Visualize C132L/160L system. I'm attempting, mostly for the fun of it, to upgrade the existing slow 5MB/s-only SCSI system, with a new-er PCI card. Of course drivers is my major concern. I'd...

LEARN ABOUT NETBSD

ahcisata

AHCISATA(4)						   BSD Kernel Interfaces Manual 					       AHCISATA(4)

NAME

     ahcisata -- AHCI 1.0 and 1.1 compliant SATA controllers driver

SYNOPSIS

     ahcisata* at pci? dev ? function ? flags 0x0000

DESCRIPTION

     The ahcisata driver supports SATA controllers compliant with the Serial ATA Advanced Host Controller Interface Revision 1.0 or 1.1 specifica-
     tion, and provides the interface to the hardware for the ata(4) driver.

     The ahcisata driver will only attach if the controller has been put in AHCI mode by the BIOS; if the controller is in pciide-compatible mode,
     it will be handled by the appropriate driver (piixide(4) for Intel AHCI controllers).

SEE ALSO

     ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

     Intel Corporation, Serial ATA Advanced Host Controller Interface (AHCI), Revision 1.3,
     http://download.intel.com/technology/serialata/pdf/rev1_3.pdf, June 26, 2008.

BUGS

     Native Command Queuing is not yet supported.

BSD
								  March 18, 2011							       BSD

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

HPUX 10.20 and 11.00 commands

Discussion started by: ortsvorsteher

2. HP-UX

HPUX config commands

Discussion started by: giriplug