network address and broadcast address? Post: 43023

10 More Discussions You Might Find Interesting

1. IP Networking

broadcast address

What is the significance of the broadcast address?

2. Solaris

bge card and broadcast address

I have a bge1 card and a bge0 card, i want the broadcast addresses to match, ifconfig shows this lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 ...

3. AIX

NETWORK IP ADDRESS on HACMP

Hi, I try to understand how to configure my ethernet network in a hacmp cluster. I have 2 nodes, 3 lan port on each node, and 1 service ip to cluster. I don't have any serial o iscsi heartbeat. Do you suggest me a possibile ip address configuration? I've many error whene I verify it from hacmp...

4. Shell Programming and Scripting

network and broadcast address

Hi Suppose You have two computers. One named kenny which has an IP address of 192.168.0.7. kenny lives on a subnet with a subnet mask of 255.255.255.240. The second computer is called zathras, which has an IP address of 192.168.0.17, zathras lives on a network with the same subnet mask. i)...

5. Solaris

ifconfig - making netmask & broadcast address permanent?

hi, I am trying to configure one of my interfaces, but after reboot - i lose the changes to the netmask & broadcast address. I have added an entry in /etc/netmasks, but it doesnt pick up the new settings. any ideas - much appreciated. before reboot: eri0:...

6. UNIX for Dummies Questions & Answers

Panic kernal-mode address fault on user address 0x14

:) Firstly Hi all!!, im NEW!! and on here hoping that someone might be able to offer me some help... i have a server that keeps crashing every few days with the error message: PANIC KERNAL-MODE ADDRESS FAULT ON USER ADDRESS 0X14 KERNAL PAGE FAULT FROM (CS:EIP)=(100:EF71B5BD) EAX=EF822000...

7. UNIX for Dummies Questions & Answers

fake network address....

Good morning! Why would having a fake network device be useful? Thanks in advance Bigben

8. Shell Programming and Scripting

Shell script to give broadcast and network address

Hello, I am running a post script in autoyast where I am trying to set the broadcast and network address. I have the ip address and netmask already (reading from a file).. I saw the post from fpmurphy but it is using ksh which isn't an option in autoyast. Thanks in advance!

9. IP Networking

Network address translation

How would one approach the problem of determining the NAT tables of a router without knowing the userid and password. The only password holder died. I know the internal ip address of the router is 192.168.2.1, and also ports 80 or 8080 and 3389 are open.

10. UNIX for Advanced & Expert Users

C program to detect duplicate ip address if any after assigning ip address to ethernet interface

Hi , Could someone let me know how to detect duplicate ip address after assigning ip address to ethernet interface using c program

LEARN ABOUT CENTOS

ipcalc

IPCALC(1)						      General Commands Manual							 IPCALC(1)

NAME

       ipcalc - perform simple manipulation of IP addresses

SYNOPSIS

       ipcalc [OPTION]... <IP address>[/prefix] [netmask]

DESCRIPTION

       ipcalc provides a simple way to calculate IP information for a host.  The various options specify what information ipcalc should display on
       standard out. Multiple options may be specified.  An IP address to operate on must always be specified.	Most  operations  also	require  a
       netmask or a CIDR prefix as well.

OPTIONS

       -c, --check
	      Validate the IP address under the specified family.  If no address family is specified, IPv4 is assumed.

       -4, --ipv4
	      Specify IPv4 address family (default).

       -6, --ipv6
	      Specify IPv6 address family.

       -b, --broadcast
	      Display the broadcast address for the given IP address and netmask.

       -h, --hostname
	      Display the hostname for the given IP address.

       -m, --netmask
	      Calculate  the netmask for the given IP address. It assumes that the IP address is in a complete class A, B, or C network. Many net-
	      works do not use the default netmasks, in which case an inappropriate value will be returned.

       -p, --prefix
	      Show the prefix for the given mask/IP address.

       -n, --network
	      Display the network address for the given IP address and netmask.

       -s, --silent
	      Don't ever display error messages.

AUTHORS

       Erik Troan <ewt@redhat.com>
       Preston Brown <pbrown@redhat.com>

       IPv6 supported wedged in by David Cantrell <dcantrell@redhat.com>

REPORTING BUGS

       Report bugs at http://bugzilla.redhat.com/

COPYRIGHT

       Copyright (C) 1997-2008 Red Hat, Inc.
       This is free software; see the source for copying conditions.  There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
       LAR PURPOSE.

Red Hat, Inc.							   April 30 2001							 IPCALC(1)

10 More Discussions You Might Find Interesting

1. IP Networking

broadcast address

Discussion started by: 98_1LE

2. Solaris

bge card and broadcast address

Discussion started by: csaunders

3. AIX

NETWORK IP ADDRESS on HACMP

Discussion started by: hacmp

4. Shell Programming and Scripting

network and broadcast address

Discussion started by: scofiled83