Sponsored Content
Full Discussion: IP Range Assigning
Homework and Emergencies Homework & Coursework Questions IP Range Assigning Post 302974532 by TryllZ on Tuesday 31st of May 2016 12:34:52 PM
Old 05-31-2016
IP Range Assigning

THIS IS A SAMPLE PRACTICAL EXAM QUESTION, COMPLETE FILE HAS BEEN ATTACHED AS WELL.

Hi All,
I'm a bit confused about assigning IP address from IP Ranges.
I am using this scenario below to understand.
Scenario
Adatum.com an international IT solutions company, is launching 12 new branches in a new country where they currently have no existing branches. The sWin CIO has asked that each subnet should host at least 1000 devices.
sWin has obtained a network address of 192.168.0.0/18. This address needs to be subnetted further. The internal subnet mask will be /22
The company's subnet plan allows for:
- Router Pool: 2 router interfaces for each subnet - the first 2 IP addresses from each subnet.
- Managed Network Device Pool: The first 20 IP addresses that follow the Router Pool are reserved for switches and other network devices
- Server Pool: The first 20 IP addresses following the Managed Network Device Pool are reserved for servers.
- Workstation Static Pool: The first 10 IP addresses following the Server Pool are reserved for Workstations that require static IP addresses.
- Workstation DHCP Pool: The remaining IP addresses are reserved for automatic IP configuration
You have been asked to use subnet 9 for your device addressing.
Configure the first IP address from the Server Pool to Lon-DC1.
Configure the first IP address from the Workstation Static Pool to sWinPC1.
Configure the first IP address from the Router Pool to be the default gateway.

So I have the IP address range as such:
192.168.0.0 is the Network ID and 192.168.3.255 is the Broadcast address.
Now can some one explain me how the IP ranges will be assigned having found the IP ranges being that since the last borrowed bit is place holder of 4 the IP ranges will also be in 4, for example 192.168.0.0 - 192.168.0.3, which means that if I use the 9th subnet the IP Range is 192.68.0.32 - 192.168.0.35, however my teacher has explained me (which I did not understand for some reason) in a way that IP range 9th subnet will be 192.168.32.1 etc..
I'm confused as to when to use my method for IP ranges and when to use my teachers.

My basic question is how to know when does the subnet range changes and which is the subnet range the first one of the teacher method.
Please, Thank You

University Of Swinburne , Kuching, Malaysia, Bachelors in Information Communication Technology Networking Major, Second Year, Professor Mujahid, Bachelor of Information and Communication Technology | Swinburne University of Technology Sarawak Campus
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

assigning variables

Before I even attempt this, is it possible to grep for a pattern, maybe a partial sentence like "go to page 3", assign that to a variable and then use awk or something to pull out the 3 and assign it to a variable? So first I would have Gotopg = "go to page 3" then page = 3 (9 Replies)
Discussion started by: k@ssidy
9 Replies

2. Shell Programming and Scripting

Assigning Value of variable

Hi In my shell script, I'm trying to find the line count of a file and assign it to a variable. LINE_COUNT=$(wc -l $FILE_NAME) But when i display LINE_COUNT, i'm getting the linecount concatenated with the file name. I want only the number. How can i get the line count alone ? Someone... (2 Replies)
Discussion started by: janemary.a
2 Replies

3. HP-UX

Assigning IP's

hi all, i want to know where i can add and IP address so when i do a "w", i can see what IP is assigned to which tty? i know in tru64 you just added an entry to /etc/hosts. this does not seem to be the case with hpux. thanks (12 Replies)
Discussion started by: macgre_r
12 Replies

4. Shell Programming and Scripting

assigning a variable

hi all, in ksh, how do i assign the output of a find command to a variable, e.g am trying something like this : totalNoFiles=$(print find ./ -name "SystemOut*.log"); but when i echo $totalNoFiles it displays find ./ -name "SystemOut*.log" instead of the total number of... (2 Replies)
Discussion started by: cesarNZ
2 Replies

5. Shell Programming and Scripting

Assigning value to a variable

can we make a global variable and store character values and add other values to that variable ?? for example a="hello, John" and can we add value ". How are you? so a can have "hello, John. How are you?" can someone help me?? (2 Replies)
Discussion started by: bonosungho
2 Replies

6. Shell Programming and Scripting

print range between two patterns if it contains a pattern within the range

I want to print between the range two patterns if a particular pattern is present in between the two patterns. I am new to Unix. Any help would be greatly appreciated. e.g. Pattern1 Bombay Calcutta Delhi Pattern2 Pattern1 Patna Madras Gwalior Delhi Pattern2 Pattern1... (2 Replies)
Discussion started by: joyan321
2 Replies

7. AIX

assigning ip to second nic

Hi admins i want to assign new ip adress to my aix 5.3 machine which is in LPAR ent3 Available Virtual I/O Ethernet Adapter (l-lan) ent0 Available 05-08 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902) ent1 Available 05-09 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902) ent2... (0 Replies)
Discussion started by: newaix
0 Replies

8. Shell Programming and Scripting

Assigning value to a variable

Unable to get the value to a variable. set -x cd $HOME echo "Enter the server name" read a echo $a i=4 j=1 k = ps -ef | awk '/server1/{ print $4 }' | tail -$i | head -$j` echo $k When I do the same in command line it works, however the same does not work when I provide that in the... (1 Reply)
Discussion started by: venkidhadha
1 Replies

9. IP Networking

IP Range Assigning

Hi All, I'm a bit confused about assigning IP address from IP Ranges. I am using this scenario below to understand. Scenario Adatum.com an international IT solutions company, is launching 12 new branches in a new country where they currently have no existing branches. The sWin CIO has asked... (3 Replies)
Discussion started by: TryllZ
3 Replies

10. Shell Programming and Scripting

Grepping a timestamp range and assigning it to a constant

Hi, I couldn't find any thing on google about it and have been trying to figure this out but am not getting anywhere. I want to know if its possible through a script. I have a file with columns start time and end time separated by a comma, basically there are some other columns which I need to... (30 Replies)
Discussion started by: dsid
30 Replies
netmasks(4)							   File Formats 						       netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 01:25 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy