Cable for SUN x4200 DC Post: 302958838

10 More Discussions You Might Find Interesting

1. IP Networking

unix and the cable modem

If the cable modem that the cable company is using doesn't support unix is there a way around that . Are there drivers I can get online or is there a way to configure redhat lenix (that's what I will be using) to work with the cable modem. Or is there a way to buy a third party cable modem that...

2. Solaris

Is the cable you are using a null modem cable or a modem cable

Hi all, Is there any difference between a null modem cable or a modem cable ? i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup. please correct if i am wrong, thks

3. Solaris

x4200 mortal errors and hellllp me!

hi after installation of sol 10 u 2 system started rebooting and when i tried to install solaris the system is giving: panic/thread=cbacf800: BAD TRAP: type=e(#pf page fault) rp=fec38ae4 addr=458b247d occured in module "unix" due to an illegal access to a user address syncing file systems.....

4. High Performance Computing

Normal (not crossover) cable for Sun cluster interconnect..

Hi grus, has anybody tried for Sun cluster interconnect normal cable ,, I mean not interconnect .. What do u think ..does it support this ? Not long ago I tried Veritas cluster and its interconnections work great with normal cable .. I wonder what will Sun cluster say to it :))

5. Solaris

Cable link down

We are unable to ping from Sun Ultra 60 to Ultra 10 machine and vice versa. We are getting an error message Cable Link Down ?. It was working fine. Troubleshooting steps taken. 1) Changed the IPaddresses on both machines 192.168.10.10 and 192.168.10.20. These machines connected through 8 port...

6. Solaris

x4200 solaris doesn't see new disk

I got two 2.5" disk for a x4200 and put it in. Just same these disk were, I remember doing this in the past, working.. Now when I put in the disk and run 'devfsadm' and also check with 'cfgadm -a', that disk doesn't seem to show up. When I pull out the disk I see this in the logs: Mar...

7. Red Hat

Different hostnames with reboot while lan cable, no lan cable

I am facing strange problem regarding hostname on my Linux(2.6.18-164.el5xen x86_64 GNU/Linux), the hostname changes if reboot with lan cable and with NO lan cable Reboot with lan cable: The hostname is ubunut Unable to connect Oracle database using sqlplus some times database is not...

8. UNIX for Dummies Questions & Answers

question on RJ-45 cable

Hi, Quick question on RJ-45 cable. I ran ethernet cable, this cable is about 200 feet long. I only need 100 feet cable, does the extra length going to hurt in terms of speed or signal? Please advise. Thanks.

9. Solaris

Need assistance to replace root disk on Netra X4200

Good day. I have a SUN Netra X4200 running on Solaris 10, with two disks in raid 1 configuration. HDD0 (c2t0d0) seems to have a problem but HDD1 (c2t1d0) is ok: # for a in c2t0d0 c2t1d0 ; do raidctl -l $a; done Volume Size Stripe Status Cache RAID Sub ...

10. Solaris

SUn Netra X4200 M2 Drivers

Hi Guys, Could someone please share the dvd/cd that came with server Netra x4200 M2 since it is not more available in Oracle site? Or do you know where I can get that? Thanks!

LEARN ABOUT OPENDARWIN

liebert

LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME

       liebert - Driver for Liebert contact-closure UPS equipment

NOTE

       This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
       contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

BUGS

       This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
       You may have to build another cable with DTR connected through to the UPS for it to work.

       There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
       fundamental limitation of any contact-closure driver.

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012								LIEBERT(8)

10 More Discussions You Might Find Interesting

1. IP Networking

unix and the cable modem

Discussion started by: gparsons70

2. Solaris

Is the cable you are using a null modem cable or a modem cable

Discussion started by: waterbear

3. Solaris

x4200 mortal errors and hellllp me!

Discussion started by: nibiru78

4. High Performance Computing

Normal (not crossover) cable for Sun cluster interconnect..

Discussion started by: samar