I just did so, and ended up no longer beeing able to boot to GUI.
After beeing stuck after the plymouth-screen (Fedora) it stucked between init 3 & init 5, somewhere...
Changing the GRUB command line helped to enter multi-user stage.
But even with deleting the just added MOK (during & after restart), i just once could boot to GUI, thought it was stable and never achieved again until i reinstalled my system just now.
Bad first experience i guess
Also, since i first installed such a signed key, when recreating grub2 config, it spawned some errors like:
Code:
ERROR: sil: invalid metadata checksum in area 3 on /dev/dm-0
But since this still happends, me not sure what it caused initaly...
System: 3.17.7-300.fc21.x86_64
I had used the attached script to sign the keys, which i just worked on, and now going to test for real again...
Now that the system was just installed this evening i dont have much to "loose" anyway..
<3 custom LiveSpin's
Any ideas what i did wrong?
Thank you in advance and good night - wish me luck.
hi i got a virtual linux machine running on qemu
my problem is connecting it to the internet
im a bit confused weather i have to make a virtual network card in qemu
and than tun tap it?
can anyone thats done it before help me out? (1 Reply)
hello all,
I have been trying to boot an image (.IMG) using qemu, for quite some time now and i can't seem to get it to work. I've been able to boot from the Windows XP CD, the Debian iso image, etc, so I know qemu is configured properly and is working. But when it come to booting an image that I... (34 Replies)
Hi, I got:
host machine: RedHat (RHEL6)
virtual machine: RedHat (RHEL6)
I run (on host machine):
qemu-system-x86_64 ...... -S -s
after that i run (on host machine):
gdb
target remote localhost:1234
set architecture i386:x86-64
and then i can use (on host machine) 'ctrl + c' to... (2 Replies)
Hi friends,
I am a UNIX lover. I have tried several unix flavors including linux, solaris(x86) and FreeBSD, all these are the unices which can be installed on x86 hardware. Now to use the IBM AIX, I searched and googled alot, finally I came across QEME, which emulates the PowerPC platorm to turn... (9 Replies)
I created and Compiled a C program to run in QEMU for ARM.
When I run the program using the command
#qemu-arm -L /home/arm-2010.09/arm-none-linux-gnueabi/libc ./test
it gives me the following error:
If 'qemu-arm' is not a typo you can use command-not-found to lookup the package that contains... (0 Replies)
I used the redhat RHEL6 boot with initrd but it failed, can sb help me
# /usr/libexec/qemu-kvm --enable-kvm -smp 8 -m 1024 -net nic,model=virtio -net tap,script=/etc/qemu-ifup -initrd /boot/initramfs-2.6.32-279.el6.x86_64.img -kernel /boot/vmlinuz-2.6.32-279.el6.x86_64 -append "root=/dev/ram... (4 Replies)
hello networking folks,
i have 3 virtual machines that need to talk to each other
How can i create a bridge to loopback ?
-net tap,vlan=0,ifname=tap1
where tap1 is connected to lo:1 , tap2 is connected to lo:2 etc
thx (0 Replies)
Hi
Problem changed.
I've got a message showing on the screen which says
Guest has not initialized the display (yet)
Any how I can fix this?
Thanks Jack (4 Replies)
Discussion started by: lucky7456969
4 Replies
LEARN ABOUT LINUX
installgrub
installgrub(1M)installgrub(1M)NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)
01-05-2015
