Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Multi-bit ECC Error on X4100 M2 Server Sun Fire
Special Forums Hardware Multi-bit ECC Error on X4100 M2 Server Sun Fire Post 302924891 by hhaswan on Thursday 13th of November 2014 12:47:52 AM
Old 11-13-2014
Quote:
Originally Posted by achenle
Did you use ECC memory?

Did you use IBM memory, or something off-the-shelf?

What are the BIOS memory settings?

Either you used the wrong memory, the BIOS settings are incorrect, or your memory is bad.

And IBM servers tend to work only with IBM memory. You might get them to work with non-IBM memory, but you're lucky if it works.
yeah I use ECC Memory especially for X4100 M2 Server Sun Fire Microsystem same as the manufacture of the server.

whether this have relate with BIOS memory settings?

If I move memory 1 GB in A0, B0, A1, and B1 slots, the system will appear this message "bank interleave requested but not enable" but I can enter in Linux System and work correctly
 

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

unable to telnet from win xp to sun fire v880 server

Hi everybody i am trying to telnet to sun server from win xp machine but getting message "x21 error connection closed by remote user". i had make changes in /etc/default/login & /etc/fuser file still i have not getting telnet access. my win xp machines ip is 10.205.121.177 & sun server ip is... (1 Reply)
Discussion started by: pshelke
1 Replies

2. Solaris

Does the Sun fire x4100 support HVM?

I have looked all over the bios configuration to enable hardware virtualization and found nothing. Could someone tell if this server support it and if so where I go to enable that feature. By the way this is a x86 server. (0 Replies)
Discussion started by: jsandova
0 Replies

3. Solaris

How to create Logical domain in Sun Fire T2000 server

Hi I am fresher in Virtualisation in solaris 10.I need to know how to install and configure guest OS, I have a server Sun T2000 with solaris 10 OS BASE. How to install logical domain, what are the prerequest for installing l domain can some one guide me what are the basic requirement to... (2 Replies)
Discussion started by: solaris8in
2 Replies

4. Solaris

Sun Fire V240 server Fan replacement

I have a sun fire v240 server. The output of prtdiag -v shows a failed fan. There are 3 fans for cooling system board. There is 1 fan for each of the powersupply (There are 2 powersupplies) From the below output how do i know which fan is bad and whats its location... (3 Replies)
Discussion started by: Tirmazi
3 Replies

5. Solaris

Need Help, I want to reset password for Sun Fire T2000 Server

============================== ALOM BOOTMON v1.3.1 ALOM Build Release: 001 Reset register: f0000000 EHRS ESRS LLRS SWRS ALOM POST 1.0 Dual Port Memory Test, PASSED. TTY External - Internal Loopback Test TTY External - Internal Loopback Test, PASSED. TTYC - Internal Loopback Test TTYC -... (4 Replies)
Discussion started by: Sameer Naik
4 Replies

6. Ubuntu

Ubuntu Install on Sun Fire X4100 network issues

Hi I have two Sun Fire X4100 machines with Ubuntu 12.04 installed on them. I am able to configure the Net Mgt port with an IP address and access the ILOM from the browser. I can also boot the Ubuntu installed and redirect the output. The issue i have is that when i configure the network... (0 Replies)
Discussion started by: kaf3773
0 Replies

7. Solaris

Help with Solaris 8 10/00 Installation on Sun Fire V490 Server

cat note Hi Sun Solaris Experts, When I try to install Solaris 8 10/00 OS via the Solaris 8 Installation Disk on our Sun Fire V490 Server using the command , I get: boot: cannot open kernel/sparcv9/unix which means it can't find the unix kernel file on the installation disk . By the way, I... (5 Replies)
Discussion started by: ssabet
5 Replies

8. Solaris

Solaris 10 1/13 & Sun Fire V490 Server

Hi Solaris/Unix Experts, I've installed Oracle Solaris 10 1/13 on a Sun Fire V490 Server via its external Serial Port using a Cisco Console Cable connected to my Laptop PC running SecureCRT terminal emulation software emulating VT100 Terminal. The Sun Fire V490 server has two on-board... (1 Reply)
Discussion started by: ssabet
1 Replies

LEARN ABOUT NETBSD

tr

TR(4)							   BSD Kernel Interfaces Manual 						     TR(4)

NAME

     tr -- TROPIC based shared memory Token-Ring cards device driver

SYNOPSIS

     tr0 at isa? port 0xa20 iomem 0xd800 irq ?
     tr* at isa? port ? irq ?
     tr* at isapnp?
     tr* at mca? slot ?
     tr* at pcmcia? function ?

DESCRIPTION

     The tr device driver supports TROPIC I based shared-memory Token-Ring cards.

HARDWARE

     Supported cards include the following IBM and 3Com models:

	   IBM	 Token-Ring Network PC Adapter

	   IBM	 Token-Ring Network PC Adapter II

	   IBM	 Token-Ring Network Adapter/A

	   IBM	 Token-Ring Network 16/4 Adapter

	   IBM	 Token-Ring Network 16/4 Adapter/A

	   IBM	 Token-Ring 16/4 Credit Card Adapter

	   IBM	 Token Ring Auto 16/4 Credit Card Adapter

	   IBM	 Turbo 16/4 Token Ring PC Card

	   IBM	 16/4 ISA Adapter

	   IBM	 Auto 16/4 Token-Ring ISA Adapter

	   IBM	 Token Ring 16/4 Credit Card Adapter

	   IBM	 Token Ring Auto 16/4 Credit Card Adapter

	   IBM	 Turbo 16/4 Token Ring PC Card

	   3Com  3C619 TokenLink

	   3Com  3C319 TokenLink Velocity

	   3Com  3C389 TokenLink Velocity PC Card

SOURCE ROUTING

     Setting IFF_LINK0 enables Token-Ring source routing.  Setting IFF_LINK1 uses all-routes broadcasts otherwise single-route broadcasts are
     used.

NOTES

     The MCA attachment has been only tested on IBM Token Ring 16/4 Adapter/A so far.  It doesn't support ifmedia(4) yet, too.

SEE ALSO

     ifmedia(4), intro(4), isa(4), isapnp(4), mca(4), pcmcia(4), ifconfig(8)

HISTORY

     The tr driver appeared in NetBSD 1.4.

BUGS

     The PCMCIA attachment does not work with the cbb(4) CardBus driver.

BSD
								  April 14, 1999							       BSD
All times are GMT -4. The time now is 03:08 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy