10-07-2014
Sun T2000 activity LED in slow blink even though Domain is up
Hello All
I have a SunFire T2000 running f/w 6.3.2
The activity led is in slow blink mode.
this typically indicates that the domain is down, however it is up and running.
I had this issue before and resetting the sc fixes the issue, but now it has come back. showfaults from the sc indicatess no problems. showlogs has a huge amount of "sc login failure for user" errors, but I don't see how that could be responsible.
showlogs also indicates "Host System Has Reset" and "Host System has shut down", yet the domain is still up. showplatform indicates that the OS is "running"
anyone have any experiences like this?
10 More Discussions You Might Find Interesting
1. Solaris
Hi Guyz,
I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso.
When trying to boot at the ok> boot cdrom
i get the following error:
-----------------------------------------------------------------------
Boot device:... (2 Replies)
Discussion started by: Mwamba
2 Replies
2. Solaris
Hi, i am really 'fresh' to Solaris or any UNIX OS. My role as web developer but i need slightly involve to Solaris support. It is harder for me to understand it and i recently encounter a problems.
/var file system (/dev/md/rdsk/d425) is being checked.
run fsck -F ufs /dev/md/rdsk/d425
... (8 Replies)
Discussion started by: webster5u
8 Replies
3. Solaris
Hi
I am fresher in Virtualisation in solaris 10.I need to know how to install and configure guest OS, I have a server Sun T2000 with solaris 10 OS BASE.
How to install logical domain, what are the prerequest for installing l domain
can some one guide me what are the basic requirement to... (2 Replies)
Discussion started by: solaris8in
2 Replies
4. Solaris
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
1 Replies
5. Solaris
Hi Guys,
I am unable to turn on the locator led light on a SUN T2000 machine
# uname -a
SunOS node1 5.10 Generic_137137-09 sun4v sparc SUNW,Sun-Fire-T200
when i try to turn it on I have following error.
# locator -n
'system' locator not found
Although the hardware specfication... (5 Replies)
Discussion started by: Asteroid
5 Replies
6. Solaris
This may be a stupid question, but I don't want to take any chances.
I have a Sun T2000 in production. I want to run the "resetsc" command on the ALOM controller to active an IP address change. Will resetting ALOM affect the running OS?
Thanks (2 Replies)
Discussion started by: soliberus
2 Replies
7. Hardware
Hi All
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
0 Replies
8. Solaris
I got a Power supply failure. I replaced the power supply and still got the error.
Any ideas on what I should try next? (1 Reply)
Discussion started by: 642fiddi
1 Replies
9. Solaris
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
... (6 Replies)
Discussion started by: insatiable1610
6 Replies
10. Solaris
Hi folks,
I was patching Sun server (SunOS suns121 5.10 Generic_144488-17 sun4v sparc SUNW,Sun-Fire-T200) with the lateset bundle. It was completed with no errors. Server was restarted with shutdown command
(/usr/sbin/shutdown -y -i6 -g0) after patching was complete. However, after that,... (3 Replies)
Discussion started by: zulu1
3 Replies
LEARN ABOUT CENTOS
pam_issue
PAM_ISSUE(8) Linux-PAM Manual PAM_ISSUE(8)
NAME
pam_issue - PAM module to add issue file to user prompt
SYNOPSIS
pam_issue.so [noesc] [issue=issue-file-name]
DESCRIPTION
pam_issue is a PAM module to prepend an issue file to the username prompt. It also by default parses escape codes in the issue file similar
to some common getty's (using x format).
Recognized escapes:
d
current day
l
name of this tty
m
machine architecture (uname -m)
machine's network node hostname (uname -n)
o
domain name of this system
release number of operating system (uname -r)
current time
s
operating system name (uname -s)
u
number of users currently logged in
U
same as u except it is suffixed with "user" or "users" (eg. "1 user" or "10 users")
v
operating system version and build date (uname -v)
OPTIONS
noesc
Turns off escape code parsing.
issue=issue-file-name
The file to output if not using the default.
MODULE TYPES PROVIDED
Only the auth module type is provided.
RETURN VALUES
PAM_BUF_ERR
Memory buffer error.
PAM_IGNORE
The prompt was already changed.
PAM_SERVICE_ERR
A service module error occurred.
PAM_SUCCESS
The new prompt was set successfully.
EXAMPLES
Add the following line to /etc/pam.d/login to set the user specific issue at login:
auth optional pam_issue.so issue=/etc/issue
SEE ALSO
pam.conf(5), pam.d(5), pam(8)
AUTHOR
pam_issue was written by Ben Collins <bcollins@debian.org>.
Linux-PAM Manual 09/19/2013 PAM_ISSUE(8)