Device Names on Android Post: 302866829

6 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Device Files names and location

HI there. I am studying System administration right now and am stuck on a question that I have failed to find the answer for in my book. The question is: Do device files need to be in the /dev directory and to they need to follow a naming convention? My answer (so far) is that since the...

2. Android

Android Scripting Environment: Shell Scripting and Android

I just upgraded to Android 2.2 from 2.1. The GPS issue that was troublesome in 2.1 seems to have been fixed. Some of web browsing seems faster, but it could just be my connection is better today ;) Flash works in some browsers but not very good and it is too slow for Flash apps designed for...

3. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

4. Android

Running only the Linux kernel of an Android device

I am looking for a way to run on top of the Linux kernel of an Android device. I want to use the existing configured Linux beneath Android rather than put a new Linux distribution onto a device. The article "The Android boot process from power on" (sorry, forum won't let me paste the link)...

5. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

6. UNIX for Beginners Questions & Answers

Android Device ID Changer shell script

this is worked "ANDROID NOUGAT" how can i use it for "ANDROID OREO" -plz help me... ------------------------------------------- echo " �-~-DEVICE ID CHANGING�-~-" sleep 2 echo " " COUNT=1 while do ; echo "settings put secure android_id " | tr -d '\n' > X1...

LEARN ABOUT OSX

usb_as

usb_as(7D)							      Devices								usb_as(7D)

NAME

       usb_as - USB audio streaming driver

SYNOPSIS

       sound@unit-address

DESCRIPTION

       The usb_as driver is a USBA (Solaris USB Architecture) compliant client driver that supports the USB Audio Class 1.0 specification.

       The  usb_as  driver processes audio data messages during play and record and sets sample frequency, precision, encoding and other functions
       on request from the USB audio control driver. See usb_ac(7D).

       This driver is plumbed under the USB audio control driver and does not directly interface with the user application.

FILES

       /kernel/drv/usb_as

	   32-bit x86 ELF kernel module

       /kernel/drv/amd64/usb_as

	   64-bit x86 ELF kernel module

       /kernel/drv/sparcv9/usb_as

	   64-bit SPARC ELF kernel module

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+------------------------------+
       |      ATTRIBUTE TYPE	     |	     ATTRIBUTE VALUE	    |
       +-----------------------------+------------------------------+
       |Architecture		     |SPARC, x86, PCI-based systems |
       +-----------------------------+------------------------------+
       |Availability		     |SUNWusb			    |
       +-----------------------------+------------------------------+
       |Stability level 	     |Evolving			    |
       +-----------------------------+------------------------------+

SEE ALSO

       mixerctl(1), attributes(5), usba(7D), usb_ac(7D), audio(7I), mixer(7I), streamio(7I)

       Writing Device Drivers

       Universal Serial Bus Specification 1.0 and 1.1

       System Administration Guide: Basic Administration

       http://www.sun.com/io

DIAGNOSTICS

       In addition to being logged, the following messages may appear on the system console. All messages are formatted in the following manner:

       Warning: <device path> (usb_as<instance num>): Error Message...

       where <device path> is the physical path to the device in /devices directory.

       No bandwidth available.

	   There is no bandwidth available for the isochronous pipe. As a result, no data will be transferred during play and record.

       Operating a full/high speed audio device on a high speed port is not supported.

	   The USB software does not currently support full or high speed audio devices connected to an external USB 2.0 hub that is linked  to  a
	   port of a USB 2.0 host controller. Audio devices must be connected directly to a port of a USB 2.0 controller or to any USB 1.1 port.

       Cannot access device. Please reconnect <name>.

	   There was an error in accessing the device during reconnect. Please reconnect the device.

       Device is not identical to the previous one on this port. Please disconnect and reconnect.

	   A  USB  audio  streaming interface was hot-removed while open. A new device was hot-inserted which is not identical to the original USB
	   audio device. Please disconnect the USB device and reconnect the device to the same port.

NOTES

       The USB audio streaming interface will be power managed if the device is idle.

SunOS 5.10							    9 Oct 2004								usb_as(7D)