Sponsored Content
Top Forums Shell Programming and Scripting Pass awk field to a command line executed within awk Post 302863767 by tuxer on Tuesday 15th of October 2013 05:36:45 AM
Old 10-15-2013
Pass awk field to a command line executed within awk

Hi,

I am trying to pass awk field to a command line executed within awk (need to convert a timestamp into formatted date).
All my attempts failed this far.

Here's an example.
It works fine with timestamp hard-codded into the command
Code:
echo "1381653229 something" |awk 'BEGIN{cmd="date -d @1381653229 +\"%m/%e/%y %H:%M\""; cmd|getline; close(cmd); date=$0;}{print date"|"$2}'

How do I do something like
Code:
echo "1381653229 something" |awk 'BEGIN{cmd="date -d @$1 +\"%m/%e/%y %H:%M\""; cmd|getline; close(cmd); date=$0;}{print date"|"$2}'

Thanks in advance.
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

can I pass awk variable to system command?

I wanna use a system function to deal with several data. So I use awk variable FILENAME to transfer the file directory to system command, but it does not work. I use a shell function "out_function" to deal with data and save the result in another directory with the same file name. How can I... (2 Replies)
Discussion started by: zhynxn
2 Replies

2. Shell Programming and Scripting

how to pass variable in NR function used in awk command?

Hi I want to pass variables with the NR function in awk command. test_file1 is input file having 500 records. var1=100. var2=200 awk -F" " 'NR >= $var1 && NR <= $var2' test_file1 > test_file2. My end result should be that test_file2 should have records from line number between... (2 Replies)
Discussion started by: Nishithinfy
2 Replies

3. Shell Programming and Scripting

Pass command line arguments to awk

I am trying to pass max as a sommand line argument when I call awk. Made the modification in the BEGIN but it is not working I'm getting an error as below: awk: txsrx.awk:82: (FILENAME=jcd.tx FNR=4161) fatal: cannot open file `40' for reading (No such file or directory) Somehow it... (2 Replies)
Discussion started by: kristinu
2 Replies

4. Shell Programming and Scripting

How to pass a field from awk in a pipe?

Thanks in advance : ) I try for a long time searching for a way to split a large gzip csv file into many gzip files (except for the last sub-file which is to joint the next big file's children.) All the subfiles are to be named by the field. But I only managed to split them into the... (9 Replies)
Discussion started by: Kingsley
9 Replies

5. Shell Programming and Scripting

Pass Parameters to awk command

I need to pass values at runtime for the below awk command where l is the length and partial.txt is the file name. awk -v l=285 '{s="%-"l"s\n";printf(s,$0);}' partial.txt > temp1.txt; (5 Replies)
Discussion started by: Amrutha24
5 Replies

6. Shell Programming and Scripting

Cannot pass rsh and awk command into a variable

Hello, I'm having some issues getting a home dir from a remote server passed to a variable. Here is what I have so far: rsh server "(ls -ld /home*/user | awk '{print \$9}')" /home3/userThat works fine and brings back what I need. But when I try to add it to a variable it goes all... (3 Replies)
Discussion started by: elcounto
3 Replies

7. Shell Programming and Scripting

How to pass filename as arguement to awk command?

Hi, I am facing one issue. The awk command works fine if i hardcode the file name but if is pass it as an arguement it doesn't work. For e.g:Below commands works fine awk -v A="$type" '{F=substr($0,23,8) "_LTD_" A ".txt"; print $0 >> F; close(F) }' RL004.txt But the below command does not... (2 Replies)
Discussion started by: Neelkanth
2 Replies

8. Shell Programming and Scripting

How to pass command line arguments to awk program?

#!/bin/awk -f BEGIN { FS=":"; } { if ( $7 == "" ) { print $1 ": no password!"; } } I want to execute this program for a particular user to check for his password from the file /etc/passwd (as the input file) and the user details to be given... (1 Reply)
Discussion started by: sri.phani
1 Replies

9. Shell Programming and Scripting

awk command not getting executed in shell script

I am able to execute awk command from shell prompt. but the same command is not getting executed when written and run in a bash script the command from bash cmd prompt. awk '/world/{for (i=2; i<NF; i++) printf $i " "; print $NF}1' myfile >tmp$$ ; mv tmp$$ myfile file: # hello world my... (4 Replies)
Discussion started by: ashima jain
4 Replies

10. Shell Programming and Scripting

Printing string from last field of the nth line of file to start (or end) of each line (awk I think)

My file (the output of an experiment) starts off looking like this, _____________________________________________________________ Subjects incorporated to date: 001 Data file started on machine PKSHS260-05CP ********************************************************************** Subject 1,... (9 Replies)
Discussion started by: samonl
9 Replies
A2P(1)							 Perl Programmers Reference Guide						    A2P(1)

NAME
a2p - Awk to Perl translator SYNOPSIS
a2p [options] [filename] DESCRIPTION
A2p takes an awk script specified on the command line (or from standard input) and produces a comparable perl script on the standard output. OPTIONS Options include: -D<number> sets debugging flags. -F<character> tells a2p that this awk script is always invoked with this -F switch. -n<fieldlist> specifies the names of the input fields if input does not have to be split into an array. If you were translating an awk script that processes the password file, you might say: a2p -7 -nlogin.password.uid.gid.gcos.shell.home Any delimiter can be used to separate the field names. -<number> causes a2p to assume that input will always have that many fields. -o tells a2p to use old awk behavior. The only current differences are: o Old awk always has a line loop, even if there are no line actions, whereas new awk does not. o In old awk, sprintf is extremely greedy about its arguments. For example, given the statement print sprintf(some_args), extra_args; old awk considers extra_args to be arguments to "sprintf"; new awk considers them arguments to "print". "Considerations" A2p cannot do as good a job translating as a human would, but it usually does pretty well. There are some areas where you may want to examine the perl script produced and tweak it some. Here are some of them, in no particular order. There is an awk idiom of putting int() around a string expression to force numeric interpretation, even though the argument is always integer anyway. This is generally unneeded in perl, but a2p can't tell if the argument is always going to be integer, so it leaves it in. You may wish to remove it. Perl differentiates numeric comparison from string comparison. Awk has one operator for both that decides at run time which comparison to do. A2p does not try to do a complete job of awk emulation at this point. Instead it guesses which one you want. It's almost always right, but it can be spoofed. All such guesses are marked with the comment ""#???"". You should go through and check them. You might want to run at least once with the -w switch to perl, which will warn you if you use == where you should have used eq. Perl does not attempt to emulate the behavior of awk in which nonexistent array elements spring into existence simply by being referenced. If somehow you are relying on this mechanism to create null entries for a subsequent for...in, they won't be there in perl. If a2p makes a split line that assigns to a list of variables that looks like (Fld1, Fld2, Fld3...) you may want to rerun a2p using the -n option mentioned above. This will let you name the fields throughout the script. If it splits to an array instead, the script is probably referring to the number of fields somewhere. The exit statement in awk doesn't necessarily exit; it goes to the END block if there is one. Awk scripts that do contortions within the END block to bypass the block under such circumstances can be simplified by removing the conditional in the END block and just exiting directly from the perl script. Perl has two kinds of array, numerically-indexed and associative. Perl associative arrays are called "hashes". Awk arrays are usually translated to hashes, but if you happen to know that the index is always going to be numeric you could change the {...} to [...]. Iteration over a hash is done using the keys() function, but iteration over an array is NOT. You might need to modify any loop that iterates over such an array. Awk starts by assuming OFMT has the value %.6g. Perl starts by assuming its equivalent, $#, to have the value %.20g. You'll want to set $# explicitly if you use the default value of OFMT. Near the top of the line loop will be the split operation that is implicit in the awk script. There are times when you can move this down past some conditionals that test the entire record so that the split is not done as often. For aesthetic reasons you may wish to change index variables from being 1-based (awk style) to 0-based (Perl style). Be sure to change all operations the variable is involved in to match. Cute comments that say "# Here is a workaround because awk is dumb" are passed through unmodified. Awk scripts are often embedded in a shell script that pipes stuff into and out of awk. Often the shell script wrapper can be incorporated into the perl script, since perl can start up pipes into and out of itself, and can do other things that awk can't do by itself. Scripts that refer to the special variables RSTART and RLENGTH can often be simplified by referring to the variables $`, $& and $', as long as they are within the scope of the pattern match that sets them. The produced perl script may have subroutines defined to deal with awk's semantics regarding getline and print. Since a2p usually picks correctness over efficiency. it is almost always possible to rewrite such code to be more efficient by discarding the semantic sugar. For efficiency, you may wish to remove the keyword from any return statement that is the last statement executed in a subroutine. A2p catches the most common case, but doesn't analyze embedded blocks for subtler cases. ARGV[0] translates to $ARGV0, but ARGV[n] translates to $ARGV[$n-1]. A loop that tries to iterate over ARGV[0] won't find it. ENVIRONMENT
A2p uses no environment variables. AUTHOR
Larry Wall <larry@wall.org> FILES
SEE ALSO
perl The perl compiler/interpreter s2p sed to perl translator DIAGNOSTICS
BUGS
It would be possible to emulate awk's behavior in selecting string versus numeric operations at run time by inspection of the operands, but it would be gross and inefficient. Besides, a2p almost always guesses right. Storage for the awk syntax tree is currently static, and can run out. perl v5.16.2 2012-08-26 A2P(1)
All times are GMT -4. The time now is 06:07 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy