hi
i have created socket program with proper IP address and port no
client side port no 1085 and 1086
gateway side port no 1086 and 1085
and port no 1087 and 1088
receiver side port no 1088 and 1087
well it works fine on client and gateway side not on receiver and gateway side... (2 Replies)
required Solaris 5.10 Kernel patch 137111-03
required Solaris 5.10 Fibre Channel Device Driver patch 125184-08
I want to know about the descriptions and what the patches will do. I searched www.sun.com (patches/updates) but don't see I am looking for. (1 Reply)
Here is an awk statement i am using to sum a series of numbers..
awk -F"," '{ for (i=1; i<=NF ; ++i) sum += $i;} # if (i > max) max=i }
END { s=""; for (i=1; i<=max; ++i) { printf "%s%s", s, sum; s=","; } printf "\n" }' filename.csv
It works fine for the summing part. But since my series... (19 Replies)
im kinda new to shell scripting so i need some help
i try to run this script and get the error code
> 5 ")syntax error: operand expected (error token is "
the code for the script is
#!/bin/sh
#
# script to see if the given value is correct
#
# Define errors
ER_AF=86 # Var is... (4 Replies)
what is this error log = hda: irq timeout: error=0x00 and how to solve?
every day upon checking the logs i see this error.
hda: irq timeout: error=0x00
hda: irq timeout: error=0x00
hda: irq timeout: error=0x00
hda: irq timeout: error=0x00
hw_client: segfault at 0000000000000046 rip... (3 Replies)
Hi All !
I am just trying to print bash variable in awk statement as string
here is my script
n=1
for file in `ls *.tk |sort -t"-" -k2n,2`; do
ak=`(awk 'FNR=='$n'{print $0}' res.dat)`
awk '{print "'$ak'",$0}' OFS="\t" $file
n=$((n+1))
unset ak
doneI am getting following error
awk:... (7 Replies)
Hi all,
OS is Solaros 10 Sparc
While doing Netbackup upgradation to 7.5 , the server was asked to reboot.
But then it came up in single user mode,
and after I typed format command it showed some disk error.
bash-3.00# format
Searching for disks...WARNING:... (2 Replies)
I keep getting "Too many open files" in /var/adm/messages that I do not know how to fix.
I've searched for solution on this forum and have increased the file descriptors limit but the problem persists.
The problem is happening in a solaris zone....
/var/adm/messages log example
May... (8 Replies)
hi all,
i had the below script
filename = /osa/data1/output.txt
printf '%27s%53s\n' ' CURRENT DATE' 26-08-2014 >> $filename
iam getting the ambigiuos redirect error in the 2nd line of the code...please guide me
regards,
vasa saikumar (3 Replies)
Discussion started by: hemanthsaikumar
3 Replies
LEARN ABOUT CENTOS
vfstab
vfstab(4) File Formats vfstab(4)NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the
default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the
file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file
system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to
indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.
The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a
swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the
swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.
EXAMPLES
The following are vfstab entries for various file system types supported in the Solaris operating environment.
Example 1: NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.
Example 2: pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of remov-
able media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-
at-boot field to no, as below. Such an entry presumes you are not running vold.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.
Example 3: CacheFS Mount
Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to
a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter
values as you would for any vfstab entry, on a single line.
device to mount: svr1:/export/abc
device to fsck: /usr/abc
mount point: /opt/cache
FS type: cachefs
fsck pass: 7
mount at boot: yes
mount options:
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache
See mount_cachefs(1M) for CacheFS-specific mount options.
Example 4: Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(7FS) for an overview of the loopback file system.
SEE ALSO fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)
System Administration Guide: Basic Administration
SunOS 5.10 21 Jun 2001 vfstab(4)