Sponsored Content
Full Discussion: RAID in Hpux
Operating Systems HP-UX RAID in Hpux Post 302841251 by smazshah on Wednesday 7th of August 2013 06:27:56 AM
Old 08-07-2013
thanks but still unable to do it.
one question can I create mount point and then create RAID1 or first I should create RAID1 and then create mount point.
Disk are new showing in ioscan -fnC disk but its not claimed what could be reason.

disk 15 0/4/1/0.0.0.4.0 sdisk CLAIMED DEVICE HP EG0300FAWHV
/dev/dsk/c10t4d0 /dev/rdsk/c10t4d0
disk 17 0/4/1/0.0.0.5.0 sdisk CLAIMED DEVICE HP EG0300FBDSP
/dev/dsk/c10t5d0 /dev/rdsk/c10t5d0

what could be the reason?

---------- Post updated at 01:27 PM ---------- Previous update was at 01:24 PM ----------

As I plugged in the disk it showed the disk has been claimed as above. but after few mints its showing not claimed. see the output below
ioscan- fnC disk.

disk 15 0/4/1/0.0.0.4.0 sdisk NO_HW DEVICE HP EG0300FAWHV
/dev/dsk/c10t4d0 /dev/rdsk/c10t4d0
disk 17 0/4/1/0.0.0.5.0 sdisk CLAIMED DEVICE HP EG0300FBDSP
 

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

HPUX 10.20 and RAID ARENA EX3 shutdown problem

Hello, I am having a Problem with an Arena EX3 Raid on an HPUX 10.20 Workstation. Everything is working fine until I shutdown the Server and power off the Raid. Then I get a filesystem corruption on the Raid. This happens everytime. The Raid is configured as Raid Level 1. I would really... (1 Reply)
Discussion started by: nleuenbe
1 Replies

2. Shell Programming and Scripting

Need Script to Use CPUs on a HPUX server to simulate Workload Manager on HPUX.

I am running HPUX and using WLM (workload manager). I want to write a script to fork CPUs to basically take CPUs from other servers to show that the communication is working and CPU licensing is working. Basically, I want to build a script that will use up CPU on a server. Any ideas? (2 Replies)
Discussion started by: cpolikowsky
2 Replies

3. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help. (2 Replies)
Discussion started by: presul
2 Replies

4. Solaris

implementing RAID 1 from RAID 5

Dear ALl, I have a RAID 5 volume which is as below d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5 d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0 d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4 d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Discussion started by: jegaraman
2 Replies

5. Solaris

Creation of Raid 01 and Raid 10

Hello All, I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps. TIA Curious solarister (1 Reply)
Discussion started by: Solarister
1 Replies

6. HP-UX

pwage-hpux-T for Trusted HPUX servers

I'm sharing this in case anybody needs it. Modified from the original solaris pwage script. This modified hpux script will check /etc/password file on hpux trusted systems search /tcb and grep the required u_succhg field. Calculate days to expiry and notify users via email. original solaris... (2 Replies)
Discussion started by: sparcguy
2 Replies

7. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

8. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My... (4 Replies)
Discussion started by: KhawHL
4 Replies

9. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
pcata(7D)																 pcata(7D)

NAME
pcata - PCMCIA ATA card device driver SYNOPSIS
pcata@socket#:a -u pcata@socket#:a -u,raw The PCMCIA ATA card device driver supports PCMCIA ATA disk and flash cards that follow the following standards: o PC card 2.01 compliance (MBR+fdisk table required for all platforms). o PC card ATA 2.01 compliance. o PC card services 2.1 compliance. The driver supports standard PCMCIA ATA cards that contain a Card Information Structure (CIS). For PCMCIA, nodes are created in /devices that include the socket number as one component of the device name referred to by the node. However, the names in /dev, /dev/dsk, and /dev/rdsk follow the current conventions for ATA devices, which do not encode the socket number in any part of the name. For example, you may have the following: +------------------------+---------------------------+---------------------+ | Platform | | | +------------------------+---------------------------+---------------------+ |/devices name | | | +------------------------+---------------------------+---------------------+ +------------------------+-/dev/dsk-name-------------+---------------------+ |/devices/isa/pcic@1,3e0 | | | +------------------------+---------------------------+---------------------+ |/disk@0:a | | | +------------------------+---------------------------+---------------------+ +------------------------+-/devices/iommu@f,e0000000-/sbus@f,e0001000-/SUNW, pcmcia@3,0 /disk@0:a |SPARC | | /dev/dsk/c1d0s0 | | | | | | | | | +------------------------+---------------------------+---------------------+ PRECONFIGURATION
If a PC Card ATA device is recognized, the pcata driver is automatically loaded, IRQs allocated, devices nodes created, and special files created (if they do not already exist). Known Problems and Limitations o vold does not support pcata. File systems must be mounted manually. o You need to umount the file system before removing the disk. o The ufs file systems on removable media (PC Card ATA) should have one of the onerror={panic, lock, umount} mount options set. CONFIGURATION
Configuration topics include initial installation and configuration, identifying an unrecognized device, special files and hot-plugging. Initial Installation and Configuration 1. Install the Solaris software. 2. Boot the system. 3. Insert the PC card ATA device. Identifying an Unrecognized Device If you insert a PC card ATA device and it is not recognized (no special files created), use the prtconf command to identify the problem. 1. Run the prtconf -D command to see if your pcata card is recognized. (A recognized device will appear at the end of the prtconf output. For example: # prtconf -D . . . pcic, instance #0 (driver name: pcic) . . . disk, instance #0 2. If pcata does not appear in the prtconf output, there is a problem with the PC card adapter configuration or with the hardware. Check to see whether the problem is with the card or the adapter by trying to use the card on another machine and by seeing if it works on the same machine using DOS. Special Files For PC card devices, nodes are created in /devices that include the socket number as one component of a device name that the node refers to. However, the /prtc/dev names and the names in /dev/dsk and /dev/rdsk do follow the current convention for ATA devices, which do not encode the socket number in any part of the name. Hot-Plugging o If you want to remove the disk, you must unmount the file system. o Use the mkfs_pcfs(1M) command to create a pcfs file system: # mkfs -F pcfs /dev/rdsk/c#d#p0:d o To mount a pcfs file system, type: # mount -F pcfs /dev/dsk/c#d#p0:c /mnt o If you want to create a ufs file system, use the newfs command and type: # newfs /dev/rdsk/c#d#s# o To mount a ufs file system, type: # mount -F ufs /dev/dsk/c#d#s# /mnt o To create a Solaris partition, run the format command and go to the Partition menu. For more information, see the format(1M) man page. /kernel/drv/pcata pcata driver See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE | +-----------------------------+-----------------------------+ |VALUE | | +-----------------------------+-----------------------------+ |Availability |SUNWpsdpr | +-----------------------------+-----------------------------+ format(1M), mount(1M), newfs(1M), pcmcia(7D), attributes(5), pcfs(7FS) 20 Oct 2000 pcata(7D)
All times are GMT -4. The time now is 05:30 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy