Sponsored Content
Top Forums Shell Programming and Scripting Finding the pattern and replacing the pattern inside the file Post 302835939 by saaisiva on Wednesday 24th of July 2013 07:11:29 AM
Old 07-24-2013
Finding the pattern and replacing the pattern inside the file

Going to work on this part again. .

---------- Post updated 07-24-13 at 03:23 AM ---------- Previous update was 07-23-13 at 08:32 AM ----------

I have used following codes but i didnt get the required result:
Code:
sed -i "s|${variable}|${value_map[${variable}]}|g" "${input_file}"

---------- Post updated at 06:11 AM ---------- Previous update was at 03:23 AM ----------

I am getting error(command not found) if i use this code: Help me out in this:

Code:
#set -x
grep -i "&*=" sample.txt >sample1.txt
#file="Replace_sample.txt"
while read line
do
  var=`echo $line |cut -f1 -d '='`
  val=`echo $var |cut -f2 -d '='`
sed -i  's|${var}|${val}|g' "sample.txt"
done < "sample1.txt"

 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Replacing a paragraph between pattern , with the content 4m another file

hi, i wanted to put the output of file f1 into the pattern space of file f2 f1: wjwjwjwjwjwjwj //these line go in file f2 jwjwjwjwjwjjwjw wjwjwjwjjwjwjwj f2: Pattern_start __________ //these are the line to be replaced __________ Pattern_end i m... (4 Replies)
Discussion started by: go4desperado
4 Replies

2. Shell Programming and Scripting

help with finding & replacing pattern in a file

Hi everyone. Could u be so kind and help me with on "simple" shell script? 1. i need to search a file line by line for a pattern. example of a lines in that file 2947 domain = feD,id = 00 0A 02 48 17 1E 1D 39 DE 00 0E 00,Name Values:snNo = f10 Add AttFlag = 0 2. i need to find... (0 Replies)
Discussion started by: dusoo
0 Replies

3. Shell Programming and Scripting

replacing a pattern in a file

Hi guys, i have a pattern that i am searching in a file and i want to extract some of this pattern ... module TS1N65ULPA96X32M4 ( .... i want to extract only TS1N65ULPA96X32M4 part and i do the following sed 's/module \(x*\).*/\1/' name_of_file but this is not quite right. could... (6 Replies)
Discussion started by: ROOZ
6 Replies

4. Shell Programming and Scripting

Finding Last occurance of another pattern when a pattern is found.

Hi, I have two files viz, rak1: $ cat rak1 rak2: $ cat rak2 sdiff rak1 rak2 returns: I want the lines that got modified, changed, or deleted preceding with the section they are in. I have done this so far: (1 Reply)
Discussion started by: rakeshou
1 Replies

5. Shell Programming and Scripting

Need help in sed command ( Replacing a pattern inside a file with a variable value )

Hello, The following sed command is giving error sed: -e expression #1, char 13: unknown option to `s' The sed command is echo "//-----" | sed "s/\/\/---*/$parChk/g" where parChk="//---ee-" How can i print the variable value from sed command ? And is it possible to replace a... (2 Replies)
Discussion started by: frozensmilz
2 Replies

6. Shell Programming and Scripting

CSV: Replacing multiple occurrences inside a pattern

Greatings all, I am coming to seek your knowledge and some help on an issue I can not currently get over. I have been searching the boards but did not find anything close to this matter I am struggling with. I am trying to clean a CSV file and make it loadable for my SQL*Loader. My problem... (1 Reply)
Discussion started by: OCanada
1 Replies

7. Shell Programming and Scripting

Help with matching pattern inside a file

I have a huge file that has roughly 30304 lines. I need to extract specific info from that file. For example, Box 1 > *aaaaaaaajjjj* > hbbvjvj > jdnnfddllll > *dgdfhfekwjh* Box 2 > *aaaaaaa'aj'jjj* > dse hkjuejef bfdw > dyeee > dsewq > *dgdfhfekwjh* >feweiuei Box 3 > *aaaa"aaaaj"jjj* >... (25 Replies)
Discussion started by: Ernst
25 Replies

8. Shell Programming and Scripting

Replacing a pattern in different cases in different columns with a single pattern

Hi All I am having pipe seperated inputs like Adam|PeteR|Josh|PEter Nick|Rave|Simon|Paul Steve|smith|PETER|Josh Andrew|Daniel|StAlin|peter Rick|PETer|ADam|RAVE i want to repleace all the occurrence of peter (in any case pattern PeteR,PEter,PETER,peter,PETer) with Peter so that output... (5 Replies)
Discussion started by: sudeep.id
5 Replies

9. UNIX for Beginners Questions & Answers

Copy pattern inside the file

Hi all, I have files and have a missing record. I need copy the existing record and mark those values up. For example in the below file 11048 is missing. I need to copy 22001 and copy those create the values for 11048. I have 120 set of files and I need to do that on all files. Note the... (8 Replies)
Discussion started by: arunkumar_mca
8 Replies

10. Shell Programming and Scripting

[sed] Finding and sticking the pattern to the beginning of successive lines up to the next pattern

I have a file like below. 2018.07.01, Sunday 09:27 some text 123456789 0 21 0.06 0.07 0.00 2018.07.02, Monday 09:31 some text 123456789 1 41 0.26 0.32 0.00 09:39 some text 456789012 1 0.07 0.09 0.09 09:45 some text 932469494 1 55 0.29 0.36 0.00 16:49 some text 123456789 0 48 0.12 0.15 0.00... (9 Replies)
Discussion started by: father_7
9 Replies
Graphics::Primitive::Component(3pm)			User Contributed Perl Documentation		       Graphics::Primitive::Component(3pm)

NAME
Graphics::Primitive::Component - Base graphical unit DESCRIPTION
A Component is an entity with a graphical representation. SYNOPSIS
my $c = Graphics::Primitive::Component->new({ origin => Geometry::Primitive::Point->new({ x => $x, y => $y }), width => 500, height => 350 }); LIFECYCLE
prepare Most components do the majority of their setup in the prepare. The goal of prepare is to establish it's minimum height and width so that it can be properly positioned by a layout manager. $driver->prepare($comp); layout This is not a method of Component, but a phase introduced by the use of Layout::Manager. If the component is a container then each of it's child components (even the containers) will be positioned according to the minimum height and width determined during prepare. Different layout manager implementations have different rules, so consult the documentation for each for details. After this phase has completed the origin, height and width should be set for all components. $lm->do_layout($comp); finalize This final phase provides and opportunity for the component to do any final changes to it's internals before being passed to a driver for drawing. An example might be a component that draws a fleuron at it's extremities. Since the final height and width isn't known until this phase, it was impossible for it to position these internal components until now. It may even defer creation of this components until now. It is not ok to defer all action to the finalize phase. If you do not establish a minimum hieght and width during prepare then the layout manager may not provide you with enough space to draw. $driver->finalize($comp); draw Handled by Graphics::Primitive::Driver. $driver->draw($comp); METHODS
Constructor new Creates a new Component. Instance Methods background_color Set this component's background color. border Set this component's border, which should be an instance of Border. callback Optional callback that is fired at the beginning of the "finalize" phase. This allows you to add some sort of custom code that can modify the component just before it is rendered. The only argument is the component itself. Note that changing the position or the dimensions of the component will not re-layout the scene. You may have weird results of you manipulate the component's dimensions here. class Set/Get this component's class, which is an abitrary string. Graphics::Primitive has no internal use for this attribute but provides it for outside use. color Set this component's foreground color. fire_callback Method to execute this component's "callback". get_tree Get a tree for this component. Since components are -- by definiton -- leaf nodes, this tree will only have the one member at it's root. has_callback Predicate that tells if this component has a "callback". height Set this component's height. inside_bounding_box Returns a Rectangle that defines the edges of the 'inside' box for this component. This box is relative to the origin of the component. inside_height Get the height available in this container after taking away space for padding, margin and borders. inside_width Get the width available in this container after taking away space for padding, margin and borders. margins Set this component's margins, which should be an instance of Insets. Margins are the space outside the component's bounding box, as in CSS. The margins should be outside the border. maximum_height Set/Get this component's maximum height. Used to inform a layout manager. maximum_width Set/Get this component's maximum width. Used to inform a layout manager. minimum_height Set/Get this component's minimum height. Used to inform a layout manager. minimum_inside_height Get the minimum height available in this container after taking away space for padding, margin and borders. minimum_inside_width Get the minimum width available in this container after taking away space for padding, margin and borders. minimum_width Set/Get this component's minimum width. Used to inform a layout manager. name Set this component's name. This is not required, but may inform consumers of a component. Pay attention to that library's documentation. origin Set/Get the origin point for this component. outside_height Get the height consumed by padding, margin and borders. outside_width Get the width consumed by padding, margin and borders. finalize Method provided to give component one last opportunity to put it's contents into the provided space. Called after prepare. padding Set this component's padding, which should be an instance of Insets. Padding is the space inside the component's bounding box, as in CSS. This padding should be between the border and the component's content. page If true then this component represents stand-alone page. This informs the driver that this component (and any children) are to be renderered on a single surface. This only really makes sense in formats that have pages such as PDF of PostScript. prepare Method to prepare this component for drawing. This is an empty sub and is meant to be overridden by a specific implementation. preferred_height Set/Get this component's preferred height. Used to inform a layout manager. preferred_width Set/Get this component's preferred width. Used to inform a layout manager. to_string Get a string representation of this component in the form of: $name $x,$y ($widthx$height) visible Set/Get this component's visible flag. width Set/Get this component's width. AUTHOR
Cory Watson, "<gphat@cpan.org>" BUGS
Please report any bugs or feature requests to "bug-geometry-primitive at rt.cpan.org", or through the web interface at http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive>. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes. COPYRIGHT &; LICENSE Copyright 2008-2009 by Cory G Watson. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. perl v5.12.3 2011-06-02 Graphics::Primitive::Component(3pm)
All times are GMT -4. The time now is 08:21 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy