Port used by lp printer Post: 302827955

8 More Discussions You Might Find Interesting

1. HP-UX

add printer on serial port

I want to add printer on a serial port can I get full details of all parameters like baudrate, parity,flow control, ... Thanks

2. IP Networking

Does anybody know how to add a printer from network in Solaris 10 using IP settings? according to our IT support, in order to add this printer in Windows XP we introduce it as a local printer which is connected to a port with an IP address, like 128.79.44.110. Anyway I don't know how it can be done...

3. SCO

Printer port

I installed an old laser printer using a print server. I can use from windows but not from unix. I set up the printer in unix as a remote printer and can ping the print server from a unix promt. I am thinking that I must open a port to the print server. Any suggestions?

4. AIX

Check printer queue on Windows printer server

Hello Let me first give a small overview of the setup. All printers are connected to Windows 2000 servers. There are a lot of UNIX (AIX & HP-UX) servers as well which have SAP running. I'm working on a script to add printers to a specified SAP instance. I want to verify the user input (to...

5. OS X (Apple)

Accessing printer through serial port

Hey, im new to processing so any help you could give me would be much appreciated. I am trying to get control of the rollers on my 9 pin dot matrix printer (epson LX 300+). Initially I was going to do this through arduino but hope to do it through processing using the serialwrite programme. ...

6. SCO

additional printer port configuration in winxware 7

Dear Sir, How can install additional pci lpt card (parallel port) I want to install second dmp printer in unixware 7 server thanks n regards

7. IP Networking

Creating a printer emulator to capture PDL/PCL data coming in on port 9100.

I have a number of Windows CE operator terminals. They have facility to print alarms/messages to ... aser or Inkjet (so they're using PCL). USB or IP. IP connection takes just the IP address. Question How could I create a service or daemon on a server to capture all this data?...

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT REDHAT

tcp-env

tcp-env(1)                                                    General Commands Manual                                                   tcp-env(1)

NAME

       tcp-env - set up TCP-related environment variables

SYNOPSIS

       tcp-env [ -rR ] [ -ttimeout ] program [ arg ...  ]

DESCRIPTION

       The  input  for  tcp-env  must be a TCP connection.  tcp-env finds out information about that connection, puts the information into several
       environment variables as described in tcp-environ(5), and runs program with the given arguments.

       Usually tcp-env is run from inetd.  It might instead be run from another server that already sets up the right  environment  variables;  if
       PROTO  is  set  to  TCP  when  tcp-env  is invoked, tcp-env assumes that all the other variables are set up properly, and it does not check
       whether the input is a TCP connection.

OPTIONS

       -r     (Default.)  Attempt to obtain TCPREMOTEINFO from the remote host.

       -R     Do not attempt to obtain TCPREMOTEINFO from the remote host.

       -ttimeout
              Give up on the TCPREMOTEINFO connection attempt after timeout seconds.  Default: 30.

SEE ALSO

       tcp-environ(5), inetd(8)

                                                                                                                                        tcp-env(1)

8 More Discussions You Might Find Interesting

1. HP-UX

add printer on serial port

Discussion started by: Hegazy Mahdy

2. IP Networking

printer port setup

Discussion started by: arash05