Problem with damaged hard drive during bootup Post: 302822651

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the...

2. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

3. Solaris

Hard Drive error

I have a hard drive that we are trying to jumpstart in a sunblad 1500. we keep getting errors. I placed the drive in my 1500. I want to wipe the drive clean because for some reason it has a partition table. and when i go to format and try to format the drive it says it can not use a program. is...

4. SCO

USB hard drive problem

I have a USB hard drive attached to my SCO OSR6 machine I accidently powered it off while it was mounted and now the OS complains when you try to re-mount it and it appears that it is complaining because it has a new device number so it isn't at the original device location anymore. does anyone...

5. Solaris

routing problem after replacing hard drive

Need to replace hard drive on Ultra 10 running Solaris 2.6. Bought new drive about the same size. Partitioned it differently to solve a space problem. After newfs used tar commands to copy most of the files to the new drive. Installboot took care of the boot file. ufsdump copied /dev and...

6. Filesystems, Disks and Memory

How do I check 4 physical damaged on Linux hard disks?

How do I check for physical damage on red hat linux hard disks? I tried smartctl /dev/sdb but it came back so fast saying it was ok. Is there a better linux command to check for bad sectors or physical disks in linux? Is there a good way such as with parted or something else? I normally in HP...

7. SCO

Booting problem due to adding hard drive incorrectly

I have tried to (unsuccessfully) add an old drive to get drivers (for the 3Com network card) onto a Sco Openserver 5.1 server. Now it wont boot: I used Sco Admin to do this. It have 3 scuzzi drives I added an IDE I think what I did wrong was add the IDE to existing space, and I should not have...

8. Filesystems, Disks and Memory

Problem with accessing my 2nd hard drive

Hello I am having a problem with being able to use my 2nd hard drive as my new os doesn't recognize it. it is /dev/hdb2 and it shows as It is still in my system. it is a 73 gb hard drive and it is useless to me now. I used to have windows XP and had no problem with it,I have since changed to...

9. UNIX for Beginners Questions & Answers

Problem setting path to external hard drive as a variable

Hello all, I am EXTREMELY new to using bash and I have a bit of a problem: I'm trying to set up a shell script that can 1.) take one of several giant files off of an external hard drive 2.) use it as input for scripts on my laptop's hard drive ...

LEARN ABOUT PHP

installgrub

installgrub(1M) 														   installgrub(1M)

NAME

       installgrub - install GRUB in a disk partition or a floppy

SYNOPSIS

       /sbin/installgrub [-fm] stage1 stage2 raw-device

       The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.

       installgrub  installs  GRUB  stage  1  and  stage  2  files on the boot area of a disk partition. If you specify the -m option, installgrub
       installs the stage 1 file on the master boot sector of the disk.

       The installgrub command accepts the following options:

       -f

	   Suppresses interaction when overwriting the master boot sector.

       -m

	   Installs GRUB stage1 on the master boot sector interactively.

       The installgrub command accepts the following operands:

       stage1

	   The name of the GRUB stage 1 file.

       stage2

	   The name of the GRUB stage 2 file.

       raw-device

	   The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable.  For  disk
	   devices,  specify  the  slice  where  the  GRUB  menu  file	is  located.  (For Solaris it is the root slice.) For a floppy disk, it is
	   /dev/rdiskette.

       Example 1: Installing GRUB on a Hard Disk Slice

       The following command installs GRUB on a system where the root slice is c0d0s0:

       example# /sbin/installgrub /boot/grub/stage1 
		/boot/grub/stage2 /dev/rdsk/c0d0s0

       Example 2: Installing GRUB on a Floppy

       The following command installs GRUB on a formatted floppy:

       example# mount -F pcfs /dev/diskette /mnt
       # mkdir -p /mnt/boot/grub
       # cp /boot/grub/* /mnt/boot/grub
       # umount /mnt
       # cd /boot/grub
       # /sbin/installgrub stage1 stage2 /dev/rdiskette

       /boot/grub

	   Directory where GRUB files reside.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)

       Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
       boot the GRUB in the Solaris partition regardless of which fdisk partition is active.

								    24 May 2005 						   installgrub(1M)