Problem with damaged hard drive during bootup Post: 302822349

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the...

2. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

3. Solaris

Hard Drive error

I have a hard drive that we are trying to jumpstart in a sunblad 1500. we keep getting errors. I placed the drive in my 1500. I want to wipe the drive clean because for some reason it has a partition table. and when i go to format and try to format the drive it says it can not use a program. is...

4. SCO

USB hard drive problem

I have a USB hard drive attached to my SCO OSR6 machine I accidently powered it off while it was mounted and now the OS complains when you try to re-mount it and it appears that it is complaining because it has a new device number so it isn't at the original device location anymore. does anyone...

5. Solaris

routing problem after replacing hard drive

Need to replace hard drive on Ultra 10 running Solaris 2.6. Bought new drive about the same size. Partitioned it differently to solve a space problem. After newfs used tar commands to copy most of the files to the new drive. Installboot took care of the boot file. ufsdump copied /dev and...

6. Filesystems, Disks and Memory

How do I check 4 physical damaged on Linux hard disks?

How do I check for physical damage on red hat linux hard disks? I tried smartctl /dev/sdb but it came back so fast saying it was ok. Is there a better linux command to check for bad sectors or physical disks in linux? Is there a good way such as with parted or something else? I normally in HP...

7. SCO

Booting problem due to adding hard drive incorrectly

I have tried to (unsuccessfully) add an old drive to get drivers (for the 3Com network card) onto a Sco Openserver 5.1 server. Now it wont boot: I used Sco Admin to do this. It have 3 scuzzi drives I added an IDE I think what I did wrong was add the IDE to existing space, and I should not have...

8. Filesystems, Disks and Memory

Problem with accessing my 2nd hard drive

Hello I am having a problem with being able to use my 2nd hard drive as my new os doesn't recognize it. it is /dev/hdb2 and it shows as It is still in my system. it is a 73 gb hard drive and it is useless to me now. I used to have windows XP and had no problem with it,I have since changed to...

9. UNIX for Beginners Questions & Answers

Problem setting path to external hard drive as a variable

Hello all, I am EXTREMELY new to using bash and I have a bit of a problem: I'm trying to set up a shell script that can 1.) take one of several giant files off of an external hard drive 2.) use it as input for scripts on my laptop's hard drive ...

LEARN ABOUT PHP

volcheck

volcheck(1)							   User Commands						       volcheck(1)

NAME

       volcheck - checks for media in a drive and by default checks all floppy media

SYNOPSIS

       volcheck [-v] [-i secs] [-t secs] pathname

DESCRIPTION

       The  volcheck  utility tells Volume Management to look at each dev/pathname in sequence and determine if new media has been inserted in the
       drive.

       The default action is to volcheck all checkable media managed by volume management.

OPTIONS

       The following options are supported:

       -i secs	Set the frequency of device checking to secs seconds.  The default is 2 seconds.  The minimum frequency is 1 second.

       -t secs	Check the named device(s) for the next secs seconds.  The maximum number of seconds allowed is 28800, which is 8 hours.  The  fre-
		quency of checking is specified by -i. There is no default total time.

       -v	Verbose.

OPERANDS

       The following operands are supported:

       pathname        The path name of a media device.

EXAMPLES

       Example 1: A sample of the volcheck command.

       The following example

	       example% volcheck -v /dev/diskette
	       /dev/diskette has media

       asks Volume Management to examine the floppy drive for new media.

       The following example

	       example% volcheck -i 2 -t 600 /dev/diskette1 &

       asks Volume Management if there is a floppy in the floppy drive every 2 seconds for 600 seconds (10 minutes).

FILES

       /dev/volctl     Volume Management control port

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWvolu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       eject(1), volcancel(1), volmissing(1) rmmount(1M), vold(1M), rmmount.conf(4), vold.conf(4), attributes(5), volfs(7FS)

WARNINGS

       Due  to a hardware limitation in many floppy drives, the act of checking for media causes mechanical action in the floppy drive.   Continu-
       ous polling of the floppy drive will cause the drive to wear out. It is recommended that polling the drive only be performed during periods
       of high use.

SunOS 5.10							    21 Feb 1997 						       volcheck(1)