As Zaxxon says, the first thing to check is the DNS service. The delay could be all caused by a very slow resolution process.
What happens if instead of
you enter
Do you still see the delay?
Otherwise, can you introduce a third system into this and see if you can tell which node is causing the problem?
Also, just noticed you are using 10.1.1.* ip addresses. Are you sure that your network knows that these ip's are local and not out in the big wide world?
I am having a strange problem...
I am trying to telnet into my Solaris m/c But it gives "Connection Closed "
Same with rlogin and rsh
But I can Login into ftp or do a finger to that m/c.
I have no hosts.allow or hosts.deny entries .
And also have one hostname in my local m/c .
Can anybody... (7 Replies)
After my previous thread, I think I found out what causes the long delays.
I run this program on several Linux computers, and the sometimes (after the file with the arrays becomes big) the fwrite takes between 100 ms to 900 ms.
This is very bad for me, as I want a timer to halt each 30 ms.... ... (5 Replies)
Hi ,
I have a Solaris 9 machine in which I can ftp but telnet/rsh/ssh is not working, although it was working before. I cannot also log in through the console. I get the banner for telnet but it kicks me out.
Any ideas?
rte (2 Replies)
We have three Oracle instances running on our Sun-Blade-T6300.
Telnet or SSH connection to one of the instance (or to user oramach) takes a lot of time whether using putty or SecureCRT but connection to any other user is very fast. Any idea what may be causing this slow connection to this... (5 Replies)
Hello,
like the title says, how can i measure the time it takes to load a module in Linux, and how how can i measure the time it takes to load a statically compiled module.
/Best Regards Olle
---------- Post updated at 01:13 PM ---------- Previous update was at 11:54 AM ----------
For... (0 Replies)
Dear experts
I have a 200MG text file in this format:
text \tab number
I try to sort using options -fd and it takes very long! is that normal or I can speed it up in some ways?
I dont want to split the file since this one is already splitted.
I use this command: sort -fd file >... (12 Replies)
When I am trying to login to a server using Putty ssh from my windows xp machine it is taking too much time for login.
My server name is http2 and when I enter this address into putty I immediately get
login as:
screen, but after I put my username root and enter the cursor moves downwards... (14 Replies)
Hi,
I wish to check the return value for wget $url.
However, some urls are designed to take 45 minutes or more to return.
All i need to check if the URL can be reached or not using wget.
How can i get wget to return the value in a few seconds ? (8 Replies)
Hello I have a LPAR AIX 6.1 on Power VM, Vio 2.2.3 and when I execute a rcp to this machine, I cant, simultaneosly, rlogin, telnet, rsh to this same LPARt. This commands stay hanged till the copy end, and Imeddiatlely the comand is executed (rlogin, telnet, rhs, etc).
Someone can give me... (1 Reply)
Discussion started by: artur_dietrich
1 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)