I am new to linux. I have a falconstor CDP installation which runs on RHEL 5.5 (Tikanga). There is a vendor option to bond nics in either 802.3ad or round robin, I choose 802.3ad. The server is connected to a Cisco 3750 switch.
The problem is dropped packets and eth03 wont come up in the PO (suspended). I am getting reports of dropped packets. When I look at the network files, things dont look right. I am not posting this without doing homework, I have spent the last couple days looking into RHEL NIC Bonding. At this point, I need help, before I make the changes I think are necessary. I dont think Eth0 should have an IP and I am not entirely sure what kind of load-balancing RHEL supports.
This is what is on the server
CISCO SWITCH
*each port looks like this
Last edited by DukeNuke2; 02-08-2013 at 02:02 PM..
We have a setup of two nodes which has two NIC cards in each. One is built in and another is D-Link (external NIC card). We are unable to ping to the external NIC cards in both. Eg: Node A has two IPs 192.168.1.10 (eth0) and 192.168.2.10 (eth1) and Node B has two IPs 192.168.1.20 (eth0) and... (3 Replies)
Hi,
I heard a command that can collect all RHEL 5 log in a single compress file before I forget.
Does any body know...What the command is ?
Thanks. (4 Replies)
I couldn't install my nic in solaris 10. I compiled and added
the driver but failed to attach the driver and ifconfig output
shows only loopback dev. Please see the following output and tell
me whether my nic has been detected and why the driver failed to
attach?
My nic is detected in linux... (0 Replies)
I am new in squid proxy.
My question is how to (and if it's necessary) to set one NIC for inbound traffic (http requests) and one NIC for outbound traffic (http answers)?
Thank you in advance! (4 Replies)
Dear All
I want tune my NIC's rps, rfs and xps value.
In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1).
Here is the question? Which device should I modify ?
eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0)
Any advice is welcome.... (0 Replies)
Hi all,
Im studying rhcsa as of now, so yum installation and dependencies are messing me to not workit out.
i have dual os, win 7 & rhel 6.
i have tried this installation of vsftpd package with rhel 6 dvd in VM rhel 6 in win 7 as well as host rhel 6.still the same issue.
below error... (6 Replies)
HI all,
First post on the forum, and my first proper project on the Paspberry Pi, so sorry if this is in the wrong place.
I am trying to turn my Pi in to a 3G/4G Bonding router. I have been researching and trying this for a week or so now. The basic plan is to have up to 6 ZTE MF823 USB... (0 Replies)
Hello all, I am having a bit of an issue on my Spacewalk installation. Some amplifying information is that it is Spacewalk 2.3 installed on a RHEL 6 machine and I am attempting to install/update a RHEL 5 channel/repository. I am fairly new to Spacewalk so I am still learning but this is what I... (3 Replies)
Hello Admins,
My ask is how can I add two different subnet IPs to same box with two different gateways?
The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware.
How can I get connected... (4 Replies)
Discussion started by: snchaudhari2
4 Replies
LEARN ABOUT OPENSOLARIS
pcan
pcan(7D) Devices pcan(7D)NAME
pcan - Cisco Aironet 802.11b wireless NIC driver
DESCRIPTION
The pcan wireless NIC driver is a multi-threaded, loadable, clonable, GLDv3-based STREAMS driver. It supports the pccard and PCI/MiniPCI
cards with the Cisco Aironet 802.11b chipset. For pccard, the driver works in both SPARC and x86 (32-bit/64-bit) modes. For PCI/MiniPCI
card, the driver works in 32-bit x86 mode only.
DRIVER CONFIGURATION
The pcan driver supports 802.11b data rates of 1, 2, 5.5 and 11 (Mbits/sec). The default is 11.
The pcan driver supports BSS networks (also known as "ap" or "infrastructure" networks) and IBSS networks (also known as "ad-hoc" net-
works). For authentication type, the pcan driver supports the "open" (or "open-system") mode. For encryption type, only WEP is currently
supported. You perform configuration and administration tasks using the dladm(1M) and wificonfig(1M) utilities.
FILES
/dev/pcan* Special character device.
/kernel/drv/pcan 32-bit ELF kernel module (x86).
/kernel/drv/amd64/pcan 64-bit ELF kernel module (x86).
/kernel/drv/sparcv9/pcan 64-bit ELF kernel module (SPARC).
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SPARC, x86 |
+-----------------------------+-----------------------------+
SEE ALSO dladm(1M), wificonfig(1M), attributes(5), gld(7D)
802.11b Standard for Wireless Local Area Networks (WLANs) - IEEE
SunOS 5.11 24 Jan 2007 pcan(7D)