Sponsored Content
Full Discussion: AIX 7 - are you using it?
Operating Systems AIX AIX 7 - are you using it? Post 302767883 by bakunin on Thursday 7th of February 2013 04:02:29 PM
Old 02-07-2013
Quote:
Originally Posted by Katelyn M
Osram Sylvania (north of Boston) is using AIX 7. Are you also using it? What do you think about it compared to the 6?
Moderator's Comments:
Mod Comment First off, let me say that i don't really like such threads because i fail to see the gain in knowledge in them. I leave this thread open, because there might be others who see it differently. Be aware, though, that the thread is basically "open on probation".


re: "compared to AIX 6" - i am sure you know all the leaflets and the marketing mumbo-jumbo, so i skp that. The most striking gain, IMHO, is the possibility to run WL-partitions with AIX 5.3 within a 7.1-LPAR, because actually 5.3 is still widely used among my customers, despite being out of maintenance since 2012. Some applications my customers depend on are not guaranteed to run with 6.x or 7.x and this alone is a reason not to switch.

On the other hand, 5.3 runs natively, as an LPAR, even in the latest POWER7 hardware without problems, even in 32-bit mode, if this is still necessary (for some applications it is). I have tested this on a p-795 in my last project.

re: "do you use it": I use everything my customer(s) want to use. Some systems run with 7.x, some with 6.x and some with 5.3, a select few even with other 5.x-variants and one system with 4.3.3. It is no secret, but i fail to see in which way this helps you in any way.

bakunin
 

8 More Discussions You Might Find Interesting

1. AIX

How to apply aix 5.3 TL8 properly on ML5 aix system ?

Is it necessary to put system into single user mode for applying aix 5.3 TL8 on a aix 5.3.5.0 system ? Is the TL8 installation not totally safe ? thank you. (6 Replies)
Discussion started by: astjen
6 Replies

2. AIX

IY17981 fix required for aix 4.3.3 to aix 5L migration but not found

Hi, redbook documentation is telling that IY17981 fix is required for aix 4.3.3 to aix 5L migration. But there is no mention about that fix in any ML installation packages. - My system is ML11 : oslevel –r 4330-11 - But xlC.rte is on wrong version : lslpp -L xlC.rte xlC.rte ... (3 Replies)
Discussion started by: astjen
3 Replies

3. AIX

How to upgrade AIX Firmware & TL Maintenance Level in AIX

Steps to upgrade AIX TL ( technology Level ) / Maintenance Level in AIX ( including Firmware HMC VIOS ) This article or post covers upgrades for - Hardware Management Console ( HMC ) - Firmware ( also known as microcode ) - VIO ( Virtual I/O Server = PowerVM ) - AIX Version, Technology... (2 Replies)
Discussion started by: filosophizer
2 Replies

4. AIX

Get Next month in AIX from curent date in unix AIX

How could we derive teh Next month in MON-RR format from current date ie sysdate in UNI AIX sheel script.I coould get a command but i supports only inLinux susse andnotin AIX. I need for Unix AIX.Pls Help. Regards Shiv (2 Replies)
Discussion started by: SHIV75
2 Replies

5. AIX

Nim on AIX 7.1 used to migrate AIX 5.3 to AIX 6.1...is possible?

Using nimadm: nimadm -j nimadmvg -c sap024 -s spot_6100 -l lpp_6100 -d "hdisk1" -Y Initializing the NIM master. Initializing NIM client sap024. 0505-205 nimadm: The level of bos.alt_disk_install.rte installed in SPOT spot_6100 (6.1.3.4) does not match the NIM master's level (7.1.1.2).... (2 Replies)
Discussion started by: sciacca75
2 Replies

6. AIX

Will it affect my AIX LPAR security, when i set up email alerts on AIX server.

Hello, I've set up email alerts on AIX Servers. so that i can get email notifications (via mail relay server) when ever there is abnormal behavior. for example 1) my script monitors CPU/disk/memory etc... when it reaches high water ark, it will send an email alert. 2) disk usage alerts 3)... (5 Replies)
Discussion started by: System Admin 77
5 Replies

7. UNIX for Beginners Questions & Answers

New to AIX: How do I setup high availability on an AIX System

I am new to AIX but not new to unix. I have an interview for an AIX systems admin position and I know they want someone who has knowledge of High Availability, Failover and LPARs From my research so far, It appear powerha is used to setup high availability and failover on Power systems but is... (2 Replies)
Discussion started by: mathisecure
2 Replies

8. AIX

Samba 3.6 on AIX 7.1 - Windows 10 Access to AIX file shares using Active Directory authentication

I am running AIX 7.1 and currently we have samba 3.6.25 installed on the server. As it stands some AIX folders are shared that can be accessed by certain Windows users. The problem is that since Windows 10 the guest feature no longer works so users have to manually type in their Windows login/pwd... (14 Replies)
Discussion started by: linuxsnake
14 Replies
PERLOS400(1)						 Perl Programmers Reference Guide					      PERLOS400(1)

NAME
perlos400 - Perl version 5 on OS/400 DESCRIPTION
This document describes various features of IBM's OS/400 operating system that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. By far the easiest way to build Perl for OS/400 is to use the PASE (Portable Application Solutions Environment), for more information see <http://www.iseries.ibm.com/developer/factory/pase/index.html> This environment allows one to use AIX APIs while programming, and it provides a runtime that allows AIX binaries to execute directly on the PowerPC iSeries. Compiling Perl for OS/400 PASE The recommended way to build Perl for the OS/400 PASE is to build the Perl 5 source code (release 5.8.1 or later) under AIX. The trick is to give a special parameter to the Configure shell script when running it on AIX: sh Configure -DPASE ... The default installation directory of Perl under PASE is /QOpenSys/perl. This can be modified if needed with Configure parameter -Dprefix=/some/dir. Starting from OS/400 V5R2 the IBM Visual Age compiler is supported on OS/400 PASE, so it is possible to build Perl natively on OS/400. The easier way, however, is to compile in AIX, as just described. If you don't want to install the compiled Perl in AIX into /QOpenSys (for packaging it before copying it to PASE), you can use a Configure parameter: -Dinstallprefix=/tmp/QOpenSys/perl. This will cause the "make install" to install everything into that directory, while the installed files still think they are (will be) in /QOpenSys/perl. If building natively on PASE, please do the build under the /QOpenSys directory, since Perl is happier when built on a case sensitive filesystem. Installing Perl in OS/400 PASE If you are compiling on AIX, simply do a "make install" on the AIX box. Once the install finishes, tar up the /QOpenSys/perl directory. Transfer the tarball to the OS/400 using FTP with the following commands: > binary > site namefmt 1 > put perl.tar /QOpenSys Once you have it on, simply bring up a PASE shell and extract the tarball. If you are compiling in PASE, then "make install" is the only thing you will need to do. The default path for perl binary is /QOpenSys/perl/bin/perl. You'll want to symlink /QOpenSys/usr/bin/perl to this file so you don't have to modify your path. Using Perl in OS/400 PASE Perl in PASE may be used in the same manner as you would use Perl on AIX. Scripts starting with #!/usr/bin/perl should work if you have /QOpenSys/usr/bin/perl symlinked to your perl binary. This will not work if you've done a setuid/setgid or have environment variable PASE_EXEC_QOPENSYS="N". If you have V5R1, you'll need to get the latest PTFs to have this feature. Scripts starting with #!/QOpenSys/perl/bin/perl should always work. Known Problems When compiling in PASE, there is no "oslevel" command. Therefore, you may want to create a script called "oslevel" that echoes the level of AIX that your version of PASE runtime supports. If you're unsure, consult your documentation or use "4.3.3.0". If you have test cases that fail, check for the existence of spool files. The test case may be trying to use a syscall that is not implemented in PASE. To avoid the SIGILL, try setting the PASE_SYSCALL_NOSIGILL environment variable or have a handler for the SIGILL. If you can compile programs for PASE, run the config script and edit config.sh when it gives you the option. If you want to remove fchdir(), which isn't implement in V5R1, simply change the line that says: d_fchdir='define' to d_fchdir='undef' and then compile Perl. The places where fchdir() is used have alternatives for systems that do not have fchdir() available. Perl on ILE There exists a port of Perl to the ILE environment. This port, however, is based quite an old release of Perl, Perl 5.00502 (August 1998). (As of July 2002 the latest release of Perl is 5.8.0, and even 5.6.1 has been out since April 2001.) If you need to run Perl on ILE, though, you may need this older port: <http://www.cpan.org/ports/#os400> Note that any Perl release later than 5.00502 has not been ported to ILE. If you need to use Perl in the ILE environment, you may want to consider using Qp2RunPase() to call the PASE version of Perl. AUTHORS
Jarkko Hietaniemi <jhi@iki.fi> Bryan Logan <bryanlog@us.ibm.com> David Larson <larson1@us.ibm.com> perl v5.16.3 2013-03-04 PERLOS400(1)
All times are GMT -4. The time now is 05:57 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy