I have written perl ping program to ping list of IPs one by one and print the status.But each and every time it is showing the status as Pass for all IPs even though the IP is wrong.
multipleip.pl
ips.txt
But the same program is working fine for single IP.
Could you please let me know what went wrong with the multipleip.pl program
Regards,
John
---------- Post updated at 06:18 AM ---------- Previous update was at 05:23 AM ----------
trying my level best but not albe to solve this...Any help on this is much appreciated...
I have a multipath system with 2 physicals, a virtual and a failsafe. All network connectivity is working fine to and from all of the interfaces and the virtual. The one thing that is not working is 'ping -s'. From this machine, I cannot send and receive packets using ping -s. ping without the... (1 Reply)
Helo !
I set up a new server using FreeBSD 6.0-RELEASE. Everything is ok, until I try to connect it to the internet. After I set up the connection I try to ping yahoo.com and I don't get any reply. When I try to ping the gateway I get a lot of replyes for the same packet. It looks similar to this:... (2 Replies)
Hi
Can someone give me a shell script that can ping a range of IPs and return IPs which are not pingable.
Range for example say 192.168.0.1 to 192.168.0.50 and whichever are not pingable then return the IP.
Thanks for your help (3 Replies)
Hi,
I have this script in ksh, what it does is loop every ip in the nodes_nso and produced another variable up_nodes_nso of only ip's that are up.
nodes_nso=$(cat /var/tmp/nodes.txt)
echo "ICMP Tests:"
up_nodes_nso=""
for ip in ${nodes_nso} ; do
ping ${ip} 3 > /dev/null
if ; then
... (1 Reply)
I have 2 physical interfaces (bnx0 and bnx1) aggregated into aggr1. I need to assign second IP, and normally I know how to do it to physical interface (i.e. bnx0:1) however same trick (aggr1:1) is not working. Is there any way to do it? (0 Replies)
anyone ever seen this problem:
I can ping the server by IP address but I can't by hostname.
nslookup is working and dns query is ok.
# nslookup mwxnsb24
Server: 10.11.49.206
Address: 10.11.49.206#53
Name: mwxnsb24
Address: 10.10.58.175
# ping... (8 Replies)
hi guys
This is suse 11 sp1
I have a Server that has 4 NICs, I've created 2 bonds
bond0(eth0-eth1) - 10.10.10.2
bond1(eth2-eth3) - 10.10.10.3
Each bound goes to a Storage Device which is directly connected
so bond0 goes to Storage_Controller_1 and 2 like this
Server_bond0 <-------->... (2 Replies)
Hi Team
we have created a DNS server at RHEL6.2 environment in 10.20.203.x/24 network.
Everything is going well on linux client as nslookup, ping by host etc in entire subnet. We are getting problem in windows client as nslookup working as well but not ping. all the firewall is disabled and... (5 Replies)
Hi,
I have ip addresses from 192.168.0.1 to 192.168.0.10.
I have to ping those series of IP address in single command? Which command i can use? (2 Replies)
I am rather new to shell scripting and currently taking a linux course.
Im having some troubles writing a loop to curl multiple ips in mutiple access logs to the site ipinfo.io and push the output to a text file for easy viewing and removing duplicates.
So far i have these simple lines
cat... (1 Reply)
Discussion started by: kjcraig77
1 Replies
LEARN ABOUT CENTOS
ocf_pacemaker_ping
OCF_PACEMAKER_PING(7) Pacemaker Configuration OCF_PACEMAKER_PING(7)NAME
ocf_pacemaker_ping - node connectivity
SYNOPSIS
[OCF_RESKEY_pidfile=string] [OCF_RESKEY_dampen=integer] [OCF_RESKEY_name=string] [OCF_RESKEY_multiplier=integer]
[OCF_RESKEY_host_list=string] [OCF_RESKEY_attempts=integer] [OCF_RESKEY_timeout=integer] [OCF_RESKEY_options=string]
[OCF_RESKEY_failure_score=integer] [OCF_RESKEY_debug=string] ping [start | stop | reload | monitor | meta-data | validate-all]
DESCRIPTION
Every time the monitor action is run, this resource agent records (in the CIB) the current number of ping nodes the host can connect to. It
is essentially the same as pingd except that it uses the system ping tool to obtain the results.
SUPPORTED PARAMETERS
OCF_RESKEY_pidfile = string [/ping-]
PID file
OCF_RESKEY_dampen = integer [5s]
Dampening interval
The time to wait (dampening) further changes occur
OCF_RESKEY_name = string [pingd]
Attribute name
The name of the attributes to set. This is the name to be used in the constraints.
OCF_RESKEY_multiplier = integer []
Value multiplier
The number by which to multiply the number of connected ping nodes by
OCF_RESKEY_host_list = string []
Host list
The list of ping nodes to count.
OCF_RESKEY_attempts = integer [2]
no. of ping attempts
Number of ping attempts, per host, before declaring it dead
OCF_RESKEY_timeout = integer [2]
ping timeout in seconds
How long, in seconds, to wait before declaring a ping lost
OCF_RESKEY_options = string []
Extra Options
A catch all for any other options that need to be passed to ping.
OCF_RESKEY_failure_score = integer []
failure_score
Resource is failed if the score is less than failure_score. Default never fails.
OCF_RESKEY_debug = string [false]
Verbose logging
Enables to use default attrd_updater verbose logging on every call.
AUTHOR
Andrew Beekhof <andrew@beekhof.net>
Author.
Pacemaker Configuration 06/10/2014 OCF_PACEMAKER_PING(7)