I'm sorry, but I found this a bit funny. How is it even possible to install a System Z RHEL on x86 platform?
---------- Post updated at 03:40 PM ---------- Previous update was at 03:37 PM ----------
dearsumon, you probably have to contact DELL to check if they provide NIC drivers (for this model) for RHEL.
---------- Post updated at 03:43 PM ---------- Previous update was at 03:40 PM ----------
I'm sure that you have checked ifconfig -a output as well. If you have not selected networking during installation /etc/sysconfig/network-scripts/ifcfg-eth0 does not get created. If eth0 shows up in ifconfig, then you have to manually create ifcfg-eth0 file.
Hi there,
I got a problem with my linux eth0.
It worked well, just one day when i boot it, "Failed" to be active.
The eth0 is inactive! I tried to use KDE network configuration tool to add the type of the eth card, I can't make it active. It gave me warning of "the eth card can't be... (1 Reply)
Hi all,
Thanks for reading and any posts.
Quick question, has anyone out there got any suggestions for standards of security for Redhat enterprise 3. We are making an RAC cluster Oracle application using Oracle 9i (hopefully moving to 10g sooner rather than later).
Thanks again for any... (0 Replies)
when i finish installed rhel 4.4 to my hp dl585 box, ifcfg-eth0 and ifcfg-eth1 is not available.when i ifconfig -a,i can not see the eth0 and eth1, only lo0 and si0. Unlike to the other server i found eth0 and eth1 files in
/etc/sysconfig/network-scripts/.
what will i do? (2 Replies)
Hi All,
I have to upgrade python installed on my Redhat enterprise Linux 4. I downloaded the latest python package from python website but not able to install the new package as the make command itself goes on running for more than a day. Can some help me regarding this. Is ther any method to... (2 Replies)
hi all
do i need to add rc. prefix on the stop script all the time especially on redhat 5 enterprise? like below
ln -s /etc/init.d/rc.stopdb2 /etc/rc0.d/K01rc.stopdb2
and on the /etc/rc.local, i need to add this only
touch /var/lock/subsys/stopdb2
Is that going to work?
thanks... (1 Reply)
When i finished installation the Redhat Enterprise Linux 6.2, and login to the system, I can't login although username: root and Password correct. I install on the Hp Blade Server. I don't know why.
How to fix this error? who can help me? :confused:
Thanks! (3 Replies)
Hi guys,
I really need your help with this.
My network interface eth0 is up but not running. I checked udev rules and ifcfg-eth0 files to make sure the mac address are the same.
It just would not come up. Please please I will really appreciate the help here.
Thank you in advance. (3 Replies)
Having an issue with clustat not displaying the rgmanager info eventhu all the of the cman started successfully. No fencing errors. all of the cluster.conf are the same on all serers ..etc. However when i run the clustat i only see this:
Cluster Status for RESTON-LSMS @ Mon Aug 31 15:13:16 2015... (4 Replies)
Discussion started by: mrn6430
4 Replies
LEARN ABOUT SUSE
ifcfg-vlan
IFCFG-VLAN(5) Network configuration IFCFG-VLAN(5)NAME
ifcfg-vlan - virtual LAN interface configuration
SYNOPSIS
/etc/sysconfig/network/ifcfg-vlan*
Virtual LANs (802.1q)
To setup a vlan interface you need a configuration file that contains at least the mandatory
ETHERDEVICE
variable with the real interface used for the virtual LAN.
Further, it may contain the optional
VLAN_ID
variable that specifies the VLAN ID.
By default and when the VLAN_ID variable is not set, the number at the end of the interface name is the VLAN ID.
Preferably the interface name and the configuration file follow the VLAN interface name scheme (type), that is either:
ifcfg-vlan<VLAN-ID> (e.g. ifcfg-vlan42)
or
ifcfg-name.<VLAN-ID> (e.g. ifcfg-eth0.42)
The VLAN-ID can be also 0-padded (e.g. ifcfg-vlan0042 or ifcfg-eth0.0042).
Also in case of custom names, trailing digits are interpreted as VLAN-ID by default (e.g. ifcfg-dmz42). When VLAN_ID is set in the config,
the interface name have any name (e.g. ifcfg-foobar).
Note: The drawback of custom interface names and VLAN_ID usage is, that a rename of the interface is required and that they violate the
name scheme.
The real interface will be set UP automatically and doesn't need a config file in case of a physical interface. But without a config file
YaST will consider this interface as unused, if will not follow hotplug events and you're unable to apply any settings, e.g. ETH-
TOOL_OPTIONS. To avoid that, provide an config file with at least STARTMODE='auto'.
The rest of the VLAN interface IP and routes configuration do not differ from ordinary interfaces. See also man ifcfg and man routes for
details.
EXAMPLES
Sets up vlan3 vlan interface on top of eth0:
ifcfg-vlan3
STARTMODE='auto'
ETHERDEVICE='eth0'
IPADDR='192.168.3.27/24'
Sets up eth0.3 vlan interface on top of eth0:
ifcfg-eth0.3
STARTMODE='auto'
ETHERDEVICE='eth0'
IPADDR='192.168.3.27/24'
Sets up lan1 vlan interface with ID 42 on top of eth0:
ifcfg-lan1
STARTMODE='auto'
ETHERDEVICE='eth0'
VLAN_ID='42'
IPADDR='192.168.3.27/24'
BUGS
Please report bugs at <http://www.suse.de/feedback>
AUTHOR
Christian Zoz <zoz@suse.de>
Michal Svec <msvec@suse.cz>
Bjoern Jacke
Mads Martin Joergensen <mmj@suse.de>
Michal Ludvig <mludvig@suse.cz>
Marius Tomaschewski <mt@suse.de>
SEE ALSO routes(5), ifcfg(5), ifup(8).
sysconfig August 2004 IFCFG-VLAN(5)