- checki it out, and if possible, give it a try...
BTW in order for grub to boot from some partition, it must be able to find a "boot sector" (or "boot record") already there.
(in your case, you should at least use `dd' to save your boot sector, and restore it along with your 'tar' stuff..
ok ?
HTH
good luck, and success !
alexandre botao
("comets never dodge")
I think u didnt understand me.
Let me clarify.
I do FULL backup of my Debian Lenny 5 server (machine A) using tar.
The restore of tar backup is Ok..its working great on the spare machine (machine B).
Now on the above running system (the spare machine) i want to create a directory
named "SystemBackup02":
Next time I want to
1. untar the contents of my backup in the "SystemBackup02"
directory.
2.change ip in /SystemBackup02/etc/network/interfaces & modify other confs
3.add an entry in grub, telling grub that it can also boot from this directory.
so the aim is to be able to boot from several versions of system backup
I have installed Linux 7.2 on a IBM xseries 235 server with 5 scsi hard drives and ServerRaid-5i Ultra320 scsi controller.
I started my installation by configuring the raid controller. I created 2 arrays, raid 1 and raid5. I then proceeded to install Linux and load the drivers.
After the... (2 Replies)
my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot.
The machine come up to grub prompt.
I tried the following from grub prompt
root (hd0, then press tab key
partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
Please help. I am new to linux. I wrote a script to run the backup on lunix machine but the job gave me an error. I am using Linux 2.6.14.3. Below is the sample of my script can anyone tell me where went wrong? Thanks in advance.
#!/bin/sh
dat=$(date +%d%b%y)... (5 Replies)
hi,
Recently, I had receive one system. it's run on the unix tru64 server.
I looking some log files when i know don't work few months age system backup to tape.
Below error:
INFO:Tape backups to tape tape0 starting
for backup list:
slot2:/disk4
Backup Command Variable... (0 Replies)
I have unix server with OS 5.8 ,,,
I tried ufsdump 0ua -f /dev/rmt/0 / to perform full system backup on tape but I failed could any one give a procedure for full system backup on solaris machine using tapes??? (1 Reply)
I would like to know if I can do a full system back
up on my Unix Sco openserver 5.0.5 Machine. If so, What
is the syntax to do this or where can I find this
information at?
Also, is it possible to make this tape bootable so
that I can easily do a full system restore? Any
information on... (2 Replies)
Hello,
I'm still new in HP-UX backup and I want to do a FULL BACKUP of HP-UX server to TAPE device. After reading on several forums and posts, i have list down several steps on how to do a full backup on HP-UX with fbackup. I would like the gurus here to comment/advise on the steps below
1)... (4 Replies)
Hi,
In order to have a sand box machine that I could use to test some system changes before going to production state, I'd like to duplicate a working system to a virtual one. Ideally, I'd like to manage to do it this way :
- Make a full system backup excluding the user file system (this... (7 Replies)
Hello i am new on Solaris, and i need to migrate my old AIX 5.3 to Solaris 11.2
Now i have all apps working fine but i have the backup cause i was reading and i have not idea about what method must i choose.
Btw on AIX i had a mksysb backup to restore all system and obviously another backups to... (4 Replies)
Discussion started by: thorin666
4 Replies
LEARN ABOUT HPUX
vgcfgrestore
VGCFGRESTORE(8) System Manager's Manual VGCFGRESTORE(8)NAME
vgcfgrestore - restore volume group descriptor area
SYNOPSIS
vgcfgrestore [-d|--debug] [-f|--file filename] [-l[l]|--list] [-h|--help] [-M|--Metadatatype1|2] [-t|--test] [-v|--verbose] VolumeGroupName
DESCRIPTION
vgcfgrestore allows you to restore the metadata of VolumeGroupName from a text backup file produced by vgcfgbackup. You can specify a
backup file with --file. If no backup file is specified, the most recent one is used. Use --list for a list of the available backup and
archive files of VolumeGroupName.
OPTIONS -l | --list -- List files pertaining to VolumeGroupName
List metadata backup and archive files pertaining to VolumeGroupName. May be used with the -f option. Does not restore Vol-
umeGroupName.
-f | --file filename -- Name of LVM metadata backup file
Specifies a metadata backup or archive file to be used for restoring VolumeGroupName. Often this file has been created with vgcfg-
backup.
See lvm for common options.
REPLACING PHYSICAL VOLUMES
vgdisplay --partial--verbose will show you the UUIDs and sizes of any PVs that are no longer present. If a PV in the VG is lost and you
wish to substitute another of the same size, use pvcreate --restorefile filename --uuid uuid (plus additional arguments as appropriate) to
initialise it with the same UUID as the missing PV. Repeat for all other missing PVs in the VG. Then use vgcfgrestore --file filename to
restore the volume group's metadata.
SEE ALSO lvm(8), vgcreate(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) VGCFGRESTORE(8)