Sponsored Content
Operating Systems Solaris Solaris 10 - hangs during boot Post 302762327 by psychocandy on Monday 28th of January 2013 10:38:19 AM
Old 01-28-2013
Quote:
Originally Posted by DukeNuke2
Sparc or x86?
sparc V440

---------- Post updated at 10:38 AM ---------- Previous update was at 10:37 AM ----------

Quote:
Originally Posted by hicksd8
You need to give a lot more information!


Do you end up with some sort of prompt after diags?


Is this a prompt that you call boot section?


Does the spinning cursor freeze? Or does it just not progress but the cursor is still spinning?

As DukeNuke2 asks, what hardware platform is it?
Set to autoboot in the prom so it starts to boot from the relevant disk.

Cursor spins for about 2 mins and then freezes.
 

10 More Discussions You Might Find Interesting

1. Solaris

solaris boot problem boot error loading interpreter(misc/krtld)

When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error. cannot find mis/krtld boot error loading... (0 Replies)
Discussion started by: johncy_j
0 Replies

2. AIX

RS6K B50 Hangs at E140 on Boot

I've got an RS6K B50, and i've installed AIX 5.3, TL5. It installs fine, the only customisations i make to the BOS are to change the locale / keyboard layout to UK, and to choose not to install graphical software. I have no video card in this box, and i connect via a serial console (null modem... (4 Replies)
Discussion started by: craigp84
4 Replies

3. Solaris

Boot hangs up on solaris

Hi all, I have a SUN server Sun-Fire-V890 running solaris 9, with a remote system console . Both the IP adresses of the server and the console are in a private network (address 10.67.xxx). For some reasons I need to give the access to the server from outside address 194.xxx, but I prefer that... (2 Replies)
Discussion started by: aribault
2 Replies

4. AIX

AIX hangs on boot

Hi guys, Got a tiny bit of a problem on one of our servers here at work. I installed AIX 5.3 on the server and that went fine. Then I upgraded to ML 5300-05-01, but now the system just hangs on boot. The system starts up and the monitor comes on in few minutes, but a few seconds later when... (6 Replies)
Discussion started by: drchris
6 Replies

5. AIX

AIX hangs through the boot process

To All: I have this AIX machine (see boot process below). The problem was it hangs at: The ctrmc Subsystem has been started. Subsystem PID is 11906.. I checked with other forums but their advise were just "strong punches in the air" with no specific explanation. I really appreciate if... (6 Replies)
Discussion started by: aix_xia
6 Replies

6. Ubuntu

Boot hangs while adding swap

Boot process hangs after reaching the following line: Adding 5853176k swap on /dev/mapper/mch-swap_1. Priority:-1 extents:1 across:5853176kUsing knoppix 6.2 as LiveCD, and mounting the partitions, I got the following: # /etc/fstab: static file system information. # # Use 'blkid -o value -s... (0 Replies)
Discussion started by: fzaker
0 Replies

7. AIX

AIX 5.3 Boot Hangs On Power4 Hardware

Hi all, We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
Discussion started by: a_sim
15 Replies

8. Solaris

Solaris x86 installation using jumpstart does not local boot ( boot from hdd)

I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Discussion started by: hemalsid
9 Replies

9. Solaris

Solaris ssh client hangs when connecting to another Solaris machine

Got a strange problem. I have 4 Solaris servers all configured the same, Solaris 10 x86 update 10. When I try to ssh from one Solaris 10 server to another server ssh hangs. I have an identical server and when I try this everything works fine. The weird thing is if I am root on the server... (1 Reply)
Discussion started by: ccj4467
1 Replies

10. Solaris

Server Hangs at boot

Hi Guys, I have a SunBlade 1500 which I use to practice at home. Suddenly when I power on the server it just displays the solaris banner and Boot device: disk File and args: Then it stops and says " rebooting with command: boot" It doesn't boot to the kernel. Is there anyway I can possibly... (5 Replies)
Discussion started by: cjashu
5 Replies
SHELL-QUOTE(1)						User Contributed Perl Documentation					    SHELL-QUOTE(1)

NAME
shell-quote - quote arguments for safe use, unmodified in a shell command SYNOPSIS
shell-quote [switch]... arg... DESCRIPTION
shell-quote lets you pass arbitrary strings through the shell so that they won't be changed by the shell. This lets you process commands or files with embedded white space or shell globbing characters safely. Here are a few examples. EXAMPLES
ssh preserving args When running a remote command with ssh, ssh doesn't preserve the separate arguments it receives. It just joins them with spaces and passes them to "$SHELL -c". This doesn't work as intended: ssh host touch 'hi there' # fails It creates 2 files, hi and there. Instead, do this: cmd=`shell-quote touch 'hi there'` ssh host "$cmd" This gives you just 1 file, hi there. process find output It's not ordinarily possible to process an arbitrary list of files output by find with a shell script. Anything you put in $IFS to split up the output could legitimately be in a file's name. Here's how you can do it using shell-quote: eval set -- `find -type f -print0 | xargs -0 shell-quote --` debug shell scripts shell-quote is better than echo for debugging shell scripts. debug() { [ -z "$debug" ] || shell-quote "debug:" "$@" } With echo you can't tell the difference between "debug 'foo bar'" and "debug foo bar", but with shell-quote you can. save a command for later shell-quote can be used to build up a shell command to run later. Say you want the user to be able to give you switches for a command you're going to run. If you don't want the switches to be re-evaluated by the shell (which is usually a good idea, else there are things the user can't pass through), you can do something like this: user_switches= while [ $# != 0 ] do case x$1 in x--pass-through) [ $# -gt 1 ] || die "need an argument for $1" user_switches="$user_switches "`shell-quote -- "$2"` shift;; # process other switches esac shift done # later eval "shell-quote some-command $user_switches my args" OPTIONS
--debug Turn debugging on. --help Show the usage message and die. --version Show the version number and exit. AVAILABILITY
The code is licensed under the GNU GPL. Check http://www.argon.org/~roderick/ or CPAN for updated versions. AUTHOR
Roderick Schertler <roderick@argon.org> perl v5.16.3 2010-06-11 SHELL-QUOTE(1)
All times are GMT -4. The time now is 01:33 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy