With the 4 disks that are showing the same geometry I just wonder whether format is seeing the same 2 drives twice; or are there really four separate physical drives? (ie, 5 in all)?
Hi Guys,
Need to add 2 disks into a JBOD array (3310).
Does anyone see anything wrong with my Procedure / Doco below?
1> Logon to system, check system logs for abnormal entries.
2> Make backups of related system files:
A>cp -p /etc/system /etc/system.backup.081505
B>cp -p /etc/vfstab... (3 Replies)
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
Hi all,
we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this?
In the past we have always kept slice 7 free -... (8 Replies)
Really sorry for the long posting. But i would really want to clear all the doubts.
I have 2 disk c0t0d0 & c0t1d0, i wanted to mirror c0t1d0 (mirror) to c0t0d0 (main).
Creating state database replica:
metadb -a -c3 -f c0t0d0s7
... (3 Replies)
Hello All,
I am trying to mirror two non-root hard drives using zfs. But "fmthard" fails when I try to copy the vtoc due to disk mismatch. Please help me.
--- iostat command shows the disk to be similiar
--- format command shows disk to be different :confused:
--- c1t2d0 is the active... (8 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
We have two node cluster with OS disk mirrored under SVM. There is slight disk problem on one of the mirror disk causing cluster to panic.
Failure of one mirror disk causing VCS to panic the node. Why VCS is not able to write /var filesystem, as one of the disk is healthy.
... (1 Reply)
Discussion started by: amlanroy
1 Replies
LEARN ABOUT SUSE
partx
PARTX(8) System Manager's Manual PARTX(8)NAME
partx - telling the kernel about presence and numbering of on-disk partitions.
SYNOPSIS
partx [-a|-d|-l] [--type TYPE] [--nr M-N] [partition] disk
DESCRIPTION
Given a block device ( disk ) and a partition table type , try to parse the partition table, and list the contents. Optionally add or
remove partitions.
This is not an fdisk - adding and removing partitions is not a change of the disk, but just telling the kernel about presence and numbering
of on-disk partitions.
OPTIONS -a add specified partitions or read disk and add all partitions
-d delete specified or all partitions
-l list partitions. Note that the all numbers are in 512-byte sectors.
--type TYPE
Specify the partition type -- dos, bsd, solaris, unixware or gpt.
--nr M-N
Specify the range of partitions (e.g --nr 2-4).
SEE ALSO addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)AVAILABILITY
The partx command is part of the util-linux-ng package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng/.
11 Jan 2007 PARTX(8)