Sponsored Content
Operating Systems Linux Red Hat Dual NICs - When I 'ifup eth1' it replaces eth0 Post 302753961 by phaedrus on Wednesday 9th of January 2013 07:09:27 PM
Old 01-09-2013
Hi, below are the contents of the two files requested. Let me know if any further info would be helpful.

Code:
DEVICE=eth0
ONBOOT=yes
TYPE=Ethernet
IPADDR=X.X.X.X
NETWORK=X.X.X.X
NETMASK=255.255.255.0
GATEWAY=X.X.X.X
DNS1=X.X.X.X
DNS2=X.X.X.X
HWADDR=00:50:56:95:6b:31
BOOTPROTO=none
IPV6INIT=no
USERCTL=no


DEVICE=eth1
ONBOOT=yes
TYPE=Ethernet
IPADDR=X.X.X.X
NETMASK=255.255.255.240
HWADDR=00:50:56:95:6b:32
BOOTPROTO=none
GATEWAY=X.X.X.X
IPV6INIT=no
USERCTL=no


Last edited by Corona688; 01-10-2013 at 12:32 PM..
 

10 More Discussions You Might Find Interesting

1. Red Hat

ifcfg-eth0 and eth1 is N/A

when i finish installed rhel 4.4 to my hp dl585 box, ifcfg-eth0 and ifcfg-eth1 is not available.when i ifconfig -a,i can not see the eth0 and eth1, only lo0 and si0. Unlike to the other server i found eth0 and eth1 files in /etc/sysconfig/network-scripts/. what will i do? (2 Replies)
Discussion started by: kenshinhimura
2 Replies

2. UNIX for Advanced & Expert Users

When is 'ifup' really done?

I have been looking in the scripts for interface management, in an effort to kick off a script of my own on any "significant network event" (I will qualify that in a bit) I managed to add a check to tell netplugd to run my script every time there is a hot-plug event. Now I need to make it so my... (0 Replies)
Discussion started by: jjinno
0 Replies

3. Shell Programming and Scripting

log in ifup

I have a little script in the /etc/network/if-up.d (debian). It should do something and write the output to a log file. But it doesn't seem to work. ifup wlan0 dosomething >> /var/log/dosomething.log I would like to add the date to the output, can somebody help me please? Thanks! (6 Replies)
Discussion started by: borobudur
6 Replies

4. UNIX for Dummies Questions & Answers

controlling traffic source from NIC eth0, eth1 in Linux

Hi Guys, is there a way to send traffic coming from the source iface (eth0, eth1)? i need to test traffic that will come from both eth0 and eth1 from a Linux box. Thanks, Martin (0 Replies)
Discussion started by: mdap
0 Replies

5. Solaris

Reg- eth0,eth1 (ethernet card)

Hi Guys, I am working as a L-1 support and i want to know that are the precaution need to take on eth0(Ethernet card) i heard on production server it is very much important, what are the steps need to observe on this tickets. (1 Reply)
Discussion started by: kurva
1 Replies

6. Red Hat

ifconfig , ifdown, ifup

hi there the ethernet wire was out of the pc when the system started. #ifconfig #ifconfig -a i did not get any ip for eth0. i plug the cable into the pc #ifdown eth0 #ifup eth0 now the ip address is assigned to eth0 Question is : IS this right way to bring ethernet down... (2 Replies)
Discussion started by: dplinux
2 Replies

7. Ubuntu

Ubunut iptable not routing trafic between eth1 and eth0

hello, first of all i am new to unix so maybe my problem is very easy for many of you but is very important to me. So the idea is that i want to use a ubuntu 10.4 machine as a router from eth0 to eth1. but the traffic routing is nor working properly i configured the 2 interfaces to be... (2 Replies)
Discussion started by: florin.bv
2 Replies

8. IP Networking

Problem in eth0 and eth1 sharing internet with other computers

hellow everbody. iam using 32 bit centos 6.2 on my desktop and iam new to linux. i have eth0 and eth1 on my desktop. so i have some problems i have menson here: i have edited: etc/sysctl.conf net.ipv4.ip_forward = 1 and i have edited iptables too # iptables -t nat -A... (2 Replies)
Discussion started by: paruhang
2 Replies

9. Red Hat

Wan on eth1 and Lan on eth0

I have a local network on dev eth0 Server has static IP of 10.0.0.1 Gateway is 10.0.0.1 and Dns is 10.0.0.1 I am using this network for imaging 500 plus computer... Now, Issue that I am having is that I need to update packages and I dont want to change the configuration on eth0 because I... (0 Replies)
Discussion started by: golpemortal
0 Replies

10. IP Networking

Why eth1 with auto dhcp disturbs pppoe over eth0?

Hi, I use ubuntu 16.04 desktop with ufw (default setup + 22, 80, 443 ports open). I connect directly to ISP using pppoe over eth0. I also have eth1 which when disabled the websites are accessible in browser. When starting eth1 with auto dhcp the websites are no longer accessible in browser (give... (3 Replies)
Discussion started by: adrhc
3 Replies
netmasks(4)                                                        File Formats                                                        netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 10:27 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy