[SOLVED] Help with new disk but don't know how to add
Hi,
This Linux server is a VM, on the VMware, I added new disk for this system. I was not able to see the new disk. I did try the scan command but didn't work. I then rebooted the system. Now when I do
On the Vmware, I added another disk for 150 Gig.
Here is the output from df -h
where is my new disk? how do I add that.
---------- Post updated at 04:47 PM ---------- Previous update was at 04:25 PM ----------
I was able to add the new...
but when I do mkfs, I get error message. Any idea?
Previously , i remove the disk by
#vxdg -g testdg -k rmdisk testdg02
But i got error when i -k adddisk
bash-2.03# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto:none - - online invalid
c0t1d0s2 auto:none ... (1 Reply)
Hi All,
We had a Sun Netra T1 go down the other day, the root disk was mirrored using vxvm. Upon boot from either disk, we had the following error appear:
WARNING: Error writing ufs log state
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run... (4 Replies)
Hi,
Anyone can help me, just want to confirm, if possible adding a disk storage that we have a RAWDATA with +ASM in our database. If possible, what would you recommend "workaround used" from us to do and the preparation. And also how long the downtime will take.
Our disk continuous to grow,... (0 Replies)
Hi all,
I guess most of you have seen this error message while installing Solaris 10 on an x86 platform. I got the error message while installing from DVD ISO on my home VMWare ESXi server.
It took me a long time to figure the exact issue and a subsequent solution. the solution is very... (1 Reply)
I've googled the hell out of this, and in my quest to advance my knowledge and expertise in modifying phones to make them more awesome, I ended up here.
I've found answers about patterns and whatnot that seem really complex for what I am trying to do, and basically it is this:
if the line says... (2 Replies)
Hi ,
during 2 weeks i´ve been trying to find them.
i need DCMU packets for managing internal disks on sun fire x4500 and sun fire x4600 on rhel. i have opened to tickets to myoraclesupport but no answer.
please anybody could tell me a link or anythiing?? i´ve been searching and searching... (1 Reply)
Hi,
Trying to add a row of numbers. There are 24 number across. Would like to have column 25 sum each row.
10 3 45 49 0 24... Sum
3 200 3 9 1 3 ...... Sum
9 7 20 9 8 10 ...... Sum
Thank you. (5 Replies)
Hi Guys,
One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine
But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server.... (9 Replies)
Update:
The / file system (/dev/rdsk/c1t0d0s0) is being checked
fsck unable to stat
WARNING - unable to repair the / filesystem. Run fsck manually (fsck -F ufs /dev/rdsk/c1t0d0s0).
Root password for system maintenance (control-d to bypass):
I am unable to hit control-d to by pass.
I... (50 Replies)
Discussion started by: br1an
50 Replies
LEARN ABOUT OSF1
voldiskadd
voldiskadd(8) System Manager's Manual voldiskadd(8)NAME
voldiskadd - Adds one or more disks for use with the Logical Storage Manager
SYNOPSIS
/usr/sbin/voldiskadd disk-address-list
DESCRIPTION
The voldiskadd utility sets up new disks that are added to the system after the initial system installation and configures the disks for
use by the Logical Storage Manager. A valid disk label must exist on the disk before using the voldiskadd utility.
One or more disks may be specified using a disk-address-list. Disk addresses in the list have the form dskn (for the entire disk) or dsknp
(for a specific partition). When specifying multiple disks, use a space between entries. Disk address names relate directly to device names
in the /dev/disk directory.
For example, here are some valid voldiskadd disk-address-list specifications: # voldiskadd dsk1 # voldiskadd dsk2 dsk3a
The file, /etc/vol/disks.exclude, may be used to exclude disks from use by voldiskadd. Each line of the file specifies the name of a disk
to exclude (for example, dsk5).
The voldiskadd utility prompts the user for a disk group name and disk media name for the disks. If a new disk group name is specified,
that disk group is created for the new disks. If no disk group name is specified, the disks are left as unassigned replacement disks for
future use. If an existing disk group name is specified, the user is prompted for whether the disks should be designated as spares for the
disk group.
If a disk is found to already contain non-Logical Storage Manager partitioning, the user is asked whether the disk should be encapsulated.
Encapsulation turns each partition of the disk into a volume. A disk should be encapsulated if it contains file systems or data that should
not be overwritten. If encapsulation is not desired for a disk, the disk can be initialized as a new disk for use by the Logical Storage
Manager. For new disks, all space on the disk becomes free space in the disk's disk group.
Context-sensitive help is available at every prompt by typing ?. Also, a list option can be used to get information on available target
disks for an operation.
The voldiskadd utility supports the following general classes of actions: Initializing a disk with reserved regions and partitions.
Disk initialization is performed by calling voldisksetup command. Adding a disk to an existing disk group.
This operation can be performed independently of the initialization of the disk drive to add a disk's storage space to a disk
group's free space pool. The volassist command may subsequently allocate from that free space. The disk can also be added as a hot
spare device. Creating new disk groups in which to import new disks.
If no disk group exists for importing disks, the option of creating the disk group is offered. Encapsulating disks that have exist-
ing contents.
This is the default action for disks that do not have a valid, existing Logical Storage Manager private region, but that do have a
disk label. Encapsulation is performed by calling volencap. Reconnecting a drive that was temporarily inaccessible.
This situation is detected automatically, by noting that the specified drive has a disk ID that matches a disk media record with no
currently associated physical disk. After reconnection, any stale plexes referring the disk are reattached, and any stopped volumes
referring the disk are restarted. This reattach action is performed by calling the volrecover script.
ERRORS
You may receive the following messages when using the voldiskadd command:
Initialization of disk device special-device failed. Error: special-device or an overlapping partition is open.
This message indicates that the partition you specified or an overlapping partition on the disk is actively in use. The partition could be
a mounted UFS or AdvFS filesystem, initialized as an LSM disk or used as a swap device.
special-device is marked in use for fstype in the disklabel. If you continue with the operation you can possibly destroy existing data.
Would you like to continue?? [y,n,q,?] (default: n)
This message indicates that the fstype of a partition or an overlapping partition is set in the disk label. The voldiskadd command prints
this message to warn that a disk partition may have valid data which could be destroyed.
If you are sure that the disk partition does not have valid data and that the partition can be added to LSM, you can ignore the warning
message by entering y at the prompt. The voldiskadd command will proceed to initialize the disk partition and add it to LSM.
FILES
A list of disks to exclude from use by voldiskadd.
SEE ALSO disklabel(8), volassist(8), voldisk(8), voldiskadm(8), voldisksetup(8), voldg(8), volintro(8)voldiskadd(8)