[SOLVED] Help with new disk but don't know how to add
Hi,
This Linux server is a VM, on the VMware, I added new disk for this system. I was not able to see the new disk. I did try the scan command but didn't work. I then rebooted the system. Now when I do
On the Vmware, I added another disk for 150 Gig.
Here is the output from df -h
where is my new disk? how do I add that.
---------- Post updated at 04:47 PM ---------- Previous update was at 04:25 PM ----------
I was able to add the new...
but when I do mkfs, I get error message. Any idea?
Previously , i remove the disk by
#vxdg -g testdg -k rmdisk testdg02
But i got error when i -k adddisk
bash-2.03# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto:none - - online invalid
c0t1d0s2 auto:none ... (1 Reply)
Hi All,
We had a Sun Netra T1 go down the other day, the root disk was mirrored using vxvm. Upon boot from either disk, we had the following error appear:
WARNING: Error writing ufs log state
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run... (4 Replies)
Hi,
Anyone can help me, just want to confirm, if possible adding a disk storage that we have a RAWDATA with +ASM in our database. If possible, what would you recommend "workaround used" from us to do and the preparation. And also how long the downtime will take.
Our disk continuous to grow,... (0 Replies)
Hi all,
I guess most of you have seen this error message while installing Solaris 10 on an x86 platform. I got the error message while installing from DVD ISO on my home VMWare ESXi server.
It took me a long time to figure the exact issue and a subsequent solution. the solution is very... (1 Reply)
I've googled the hell out of this, and in my quest to advance my knowledge and expertise in modifying phones to make them more awesome, I ended up here.
I've found answers about patterns and whatnot that seem really complex for what I am trying to do, and basically it is this:
if the line says... (2 Replies)
Hi ,
during 2 weeks i´ve been trying to find them.
i need DCMU packets for managing internal disks on sun fire x4500 and sun fire x4600 on rhel. i have opened to tickets to myoraclesupport but no answer.
please anybody could tell me a link or anythiing?? i´ve been searching and searching... (1 Reply)
Hi,
Trying to add a row of numbers. There are 24 number across. Would like to have column 25 sum each row.
10 3 45 49 0 24... Sum
3 200 3 9 1 3 ...... Sum
9 7 20 9 8 10 ...... Sum
Thank you. (5 Replies)
Hi Guys,
One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine
But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server.... (9 Replies)
Update:
The / file system (/dev/rdsk/c1t0d0s0) is being checked
fsck unable to stat
WARNING - unable to repair the / filesystem. Run fsck manually (fsck -F ufs /dev/rdsk/c1t0d0s0).
Root password for system maintenance (control-d to bypass):
I am unable to hit control-d to by pass.
I... (50 Replies)
Discussion started by: br1an
50 Replies
LEARN ABOUT OSX
partx
PARTX(8) System Administration PARTX(8)NAME
partx - tell the kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-P|-r|-s|-u] [-t type] [-n M:N] [-] disk
partx [-a|-d|-P|-r|-s|-u] [-t type] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It can also tell the kernel to add or remove
partitions from its bookkeeping.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were a whole disk (for example
to list nested subpartitions), use the argument "-" (hyphen-minus). For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than as a partition.
partx is not an fdisk program - adding and removing partitions does not change the disk, it just tells the kernel about the presence and
numbering of on-disk partitions.
OPTIONS -a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the SIZE column in bytes rather than in human-readable format.
-d, --delete
Delete the specified partitions or all partitions.
-g, --noheadings
Do not print a header line with --show or --raw.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in favour of --show. Do not
use it in newly written scripts.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format M-N is supported. The range may contain negative num-
bers, for example --nr -1:-1 means the last partition, and --nr -2:-1 means the last two partitions. Supported range specifications
are:
M Specifies just one partition (e.g. --nr 3).
M: Specifies the lower limit only (e.g. --nr 2:).
:N Specifies the upper limit only (e.g. --nr :4).
M:N Specifies the lower and upper limits (e.g. --nr 2:4).
-o, --output list
Define the output columns to use for --show, --pairs and --raw output. If no output arrangement is specified, then a default set is
used. Use --help to get list of all supported columns. This option cannot be combined with the --add, --delete, --update or --list
options.
-P, --pairs
List the partitions using the KEY="value" format.
-r, --raw
List the partitions using the raw output format.
-s, --show
List the partitions. The output columns can be selected and rearranged with the --output option. All numbers (except SIZE) are in
512-byte sectors.
-t, --type type
Specify the partition table type.
--list-types
List supported partition types and exit.
-u, --update
Update the specified partitions.
-S, --sector-size size
Overwrite default sector size.
-v, --verbose
Verbose mode.
-V, --version
Display version information and exit.
-h, --help
Display help text and exit.
EXAMPLES
partx --show /dev/sdb3
partx --show --nr 3 /dev/sdb
partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 5 /dev/sdb
Prints the start sector of partition 5 on /dev/sdb without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
SEE ALSO addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)AUTHORS
Davidlohr Bueso <dave@gnu.org>
Karel Zak <kzak@redhat.com>
The original version was written by Andries E. Brouwer <aeb@cwi.nl>.
ENVIRONMENT
LIBBLKID_DEBUG=all
enables libblkid debug output.
AVAILABILITY
The partx command is part of the util-linux package and is available from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils
/util-linux/>.
util-linux December 2014 PARTX(8)