Unable to connect "Reliance Netconnect" on Redh Hat Linux 5 Post: 302740877

Sponsored Content

Operating Systems Linux Red Hat Unable to connect "Reliance Netconnect" on Redh Hat Linux 5 Post 302740877 by arunraj192 on Friday 7th of December 2012 03:44:43 AM

12-07-2012

Registered User

Unable to connect "Reliance Netconnect" on Redh Hat Linux 5

Hi Friends,

Can someone help me with below issue , thanks.

Subject : Unable to configure "Reliance NetConnect" on RHEL 5

Here some helpful information :

Code:

[root@localhost dev]# lsusb
Bus 001 Device 001: ID 0000:0000  
Bus 001 Device 002: ID 8087:0020  
Bus 001 Device 003: ID 192f:0416  
Bus 002 Device 005: ID 12d1:1446 Huawei Technologies Co., Ltd. 
Bus 002 Device 001: ID 0000:0000  
Bus 002 Device 002: ID 8087:0020  
Bus 002 Device 003: ID 064e:f209 Suyin Corp. 

[root@localhost dev]# dmesg | grep tty
[root@localhost dev]# 


[root@localhost dev]# more /etc/wvdial.conf 
# Reliance Netconnect

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode =1
Modem Type = USB Modem
ISDN = 0
Phone = #777
New PPPD = yes
Modem = /dev/ttyUSB0
Username = **********
Password = **********
Baud = 9600
[root@localhost dev]# 

[root@localhost dev]# lsmod
Module                  Size  Used by
usbserial              67761  0 
usb_storage           116769  0 
autofs4                57161  2 
hidp                   83649  2 
rfcomm                104809  0 
l2cap                  89409  10 hidp,rfcomm
bluetooth             118725  5 hidp,rfcomm,l2cap
sunrpc                197513  1 
dm_mirror              60105  0 
dm_multipath           52433  0 
dm_mod                 96017  2 dm_mirror,dm_multipath
ipv6                  411425  14 
parport_pc             62313  0 
lp                     47121  0 
parport                73165  2 parport_pc,lp
sr_mod                 50789  0 
cdrom                  68713  1 sr_mod
sg                     69865  0 
shpchp                 70765  0 
joydev                 43969  0 
pcspkr                 36289  0 
serio_raw              40517  0 
ahci                   55621  2 
libata                160849  1 ahci
sd_mod                 56257  3 
scsi_mod              186361  5 usb_storage,sr_mod,sg,libata,sd_mod
ext3                  166993  1 
jbd                    93873  1 ext3
ehci_hcd               65229  0 
ohci_hcd               54493  0 
uhci_hcd               57433  0 
[root@localhost dev]# 

[root@localhost dev]# wvdialconf /etc/wvdial.conf 
Scanning your serial ports for a modem.

Port Scan<*1>: S0   S1   S2   S3   USB0 


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?
[root@localhost dev]#

Let me know if you need more information inorder to resolve this issue.

Thanks
Arun

Last edited by Scrutinizer; 12-07-2012 at 06:05 AM.. Reason: Replaced font tags with code tags

arunraj192

View Public Profile for arunraj192

Find all posts by arunraj192

5 More Discussions You Might Find Interesting

1. SuSE

VMDB Failure" followed by "Unable to open snapshot file"

keep getting an error when I try to revert to a snapshot: "VMDB Failure" followed by "Unable to open snapshot file" Im using vmware server 1.0.4, host OS is windows xp and guest OS is SLES. Is there anything I can do to recover the snapshot or am I in trouble!?!?!

2. UNIX for Advanced & Expert Users

linux system recovery after overriding connect() by "ld.so.preload"

dear fellows; i have used ld.so.preload file to override connect() function, dynamic library overriding, it did worked really fine ...... but i went on to struck in a situation ... within the overrided connect() i have used printf once to see IP and Port to whom the connect request is being...

3. Emergency UNIX and Linux Support

Unable to connect to oracle in red hat linux

Hi Gurus, I have installed the oracle xpress 10g edition in my red hat linux and saw the message that it has been installed successfully ,but after that I started the database by going through application->database->start database and after that i open the sql prumt but when i tried to connect...

4. Debian

Connect Reliance netconnect data card in linux debian

Hi, I want to connect Reliance netconnect data card in linux - debian. I don't know which software needs to be install. can you please help me what is the software needs to be install to connect this datacard. I have connected this datacard in windows using the CD which is provided by...

5. UNIX for Dummies Questions & Answers

how to know if i use "Red Hat Enterprise Linux" or "Red Hat Desktop" ?

LEARN ABOUT REDHAT

wvdialconf

WVDIALCONF(1)						      General Commands Manual						     WVDIALCONF(1)

NAME

       wvdialconf - build a configuration file for wvdial(1)

SYNOPSIS

       wvdialconf /etc/wvdial.conf

DESCRIPTION

       wvdialconf detects your modem, its maximum baud rate, and a good initialization string and generates or updates the wvdial(1) configuration
       file based on this information.

       wvdialconf is completely non-interactive.  You still need to edit /etc/wvdial.conf to specify the phone number, login name, and password of
       your internet account in order for wvdial(1) to work.

       It  is  safe  to  run  wvdialconf  if a configuration file already exists.  In that case, only the Modem, Baud, Init, and Init2 options are
       changed in the [Dialer Defaults] section, and only if autodetection is successful.

BUGS

       We're willing to entertain the possibility.  Let us know if you have any problems by sending an e-mail to <wvdial@nit.ca>.

       Also, there is now a mailing list for discussion about wvdial.  If you are having problems, or have anything else to say,  send	e-mail	to
       <wvdial-list@lists.nit.ca>.

DIAGNOSTICS

       An exit status of 0 means that a modem was detected and the configuration file was updated successfully.

       Any other value means that something went wrong and the configuration file was unchanged.

AUTHORS

       Dave Coombs and Avery Pennarun for Net Integration Technologies, as part of the Worldvisions Weaver project.

SEE ALSO

       wvdial(1), wvdial.conf(5).

Worldvisions							    August 1998 						     WVDIALCONF(1)