ntpd_selinux(8) 						SELinux Policy ntpd						   ntpd_selinux(8)

NAME

       ntpd_selinux - Security Enhanced Linux Policy for the ntpd processes

DESCRIPTION

       Security-Enhanced Linux secures the ntpd processes via flexible mandatory access control.

       The ntpd processes execute with the ntpd_t SELinux type. You can check if you have these processes running by executing the ps command with
       the -Z qualifier.

       For example:

       ps -eZ | grep ntpd_t

ENTRYPOINTS

       The ntpd_t SELinux type can be entered via the ntpd_exec_t, ntpdate_exec_t file types.

       The default entrypoint paths for the ntpd_t domain are the following:

       /etc/cron.(daily|weekly)/ntp-simple, /etc/cron.(daily|weekly)/ntp-server, /usr/sbin/ntpd, /usr/sbin/sntp, /usr/sbin/ntpdate

PROCESS TYPES

       SELinux defines process types (domains) for each process running on the system

       You can see the context of a process using the -Z option to ps

       Policy governs the access confined processes have to files.  SELinux ntpd policy is very flexible allowing users to setup their	ntpd  pro-
       cesses in as secure a method as possible.

       The following process types are defined for ntpd:

       ntpd_t

       Note:  semanage	permissive  -a	ntpd_t	can be used to make the process type ntpd_t permissive. SELinux does not deny access to permissive
       process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANS

       SELinux policy is customizable based on least access required.  ntpd policy is extremely flexible and has several booleans that	allow  you
       to manipulate the policy and run ntpd with the tightest access possible.

       If  you want to allow users to resolve user passwd entries directly from ldap rather then using a sssd server, you must turn on the authlo-
       gin_nsswitch_use_ldap boolean. Disabled by default.

       setsebool -P authlogin_nsswitch_use_ldap 1

       If you want to allow all daemons to write corefiles to /, you must turn on the daemons_dump_core boolean. Disabled by default.

       setsebool -P daemons_dump_core 1

       If you want to enable cluster mode for daemons, you must turn on the daemons_enable_cluster_mode boolean. Enabled by default.

       setsebool -P daemons_enable_cluster_mode 1

       If you want to allow all daemons to use tcp wrappers, you must turn on the daemons_use_tcp_wrapper boolean. Disabled by default.

       setsebool -P daemons_use_tcp_wrapper 1

       If you want to allow all daemons the ability to read/write terminals, you must turn on the daemons_use_tty boolean. Disabled by default.

       setsebool -P daemons_use_tty 1

       If you want to deny any process from ptracing or debugging any other processes, you must  turn  on  the	deny_ptrace  boolean.  Enabled	by
       default.

       setsebool -P deny_ptrace 1

       If you want to allow all domains to use other domains file descriptors, you must turn on the domain_fd_use boolean. Enabled by default.

       setsebool -P domain_fd_use 1

       If  you	want  to  allow  all domains to have the kernel load modules, you must turn on the domain_kernel_load_modules boolean. Disabled by
       default.

       setsebool -P domain_kernel_load_modules 1

       If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

       setsebool -P fips_mode 1

       If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.

       setsebool -P global_ssp 1

       If you want to allow confined applications to run with kerberos, you must turn on the kerberos_enabled boolean. Enabled by default.

       setsebool -P kerberos_enabled 1

       If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.

       setsebool -P nis_enabled 1

       If you want to allow confined applications to use nscd shared memory, you must turn on the nscd_use_shm boolean. Enabled by default.

       setsebool -P nscd_use_shm 1

       If you want to support NFS home directories, you must turn on the use_nfs_home_dirs boolean. Disabled by default.

       setsebool -P use_nfs_home_dirs 1

       If you want to support SAMBA home directories, you must turn on the use_samba_home_dirs boolean. Disabled by default.

       setsebool -P use_samba_home_dirs 1

NSSWITCH DOMAIN

       If you want to allow users to resolve user passwd entries directly from ldap rather then using a sssd server for the ntpd_t, you must  turn
       on the authlogin_nsswitch_use_ldap boolean.

       setsebool -P authlogin_nsswitch_use_ldap 1

       If you want to allow confined applications to run with kerberos for the ntpd_t, you must turn on the kerberos_enabled boolean.

       setsebool -P kerberos_enabled 1

PORT TYPES

       SELinux defines port types to represent TCP and UDP ports.

       You can see the types associated with a port by using the following command:

       semanage port -l

       Policy  governs the access confined processes have to these ports.  SELinux ntpd policy is very flexible allowing users to setup their ntpd
       processes in as secure a method as possible.

       The following port types are defined for ntpd:

       ntp_port_t

       Default Defined Ports:
		 udp 123

MANAGED FILES

       The SELinux process type ntpd_t can manage files labeled with the following file types.	The paths listed are the default paths	for  these
       file types.  Note the processes UID still need to have DAC permissions.

       cluster_conf_t

	    /etc/cluster(/.*)?

       cluster_var_lib_t

	    /var/lib/pcsd(/.*)?
	    /var/lib/cluster(/.*)?
	    /var/lib/openais(/.*)?
	    /var/lib/pengine(/.*)?
	    /var/lib/corosync(/.*)?
	    /usr/lib/heartbeat(/.*)?
	    /var/lib/heartbeat(/.*)?
	    /var/lib/pacemaker(/.*)?

       cluster_var_run_t

	    /var/run/crm(/.*)?
	    /var/run/cman_.*
	    /var/run/rsctmp(/.*)?
	    /var/run/aisexec.*
	    /var/run/heartbeat(/.*)?
	    /var/run/cpglockd.pid
	    /var/run/corosync.pid
	    /var/run/rgmanager.pid
	    /var/run/cluster/rgmanager.sk

       gpsd_tmpfs_t

       ntp_drift_t

	    /var/lib/ntp(/.*)?
	    /etc/ntp/data(/.*)?
	    /var/lib/sntp-kod(/.*)?

       ntpd_log_t

	    /var/log/ntp.*
	    /var/log/xntpd.*
	    /var/log/ntpstats(/.*)?

       ntpd_tmp_t

       ntpd_tmpfs_t

       ntpd_var_run_t

	    /var/run/ntpd.pid

       root_t

	    /
	    /initrd

       tmpfs_t

	    /dev/shm
	    /lib/udev/devices/shm
	    /usr/lib/udev/devices/shm

FILE CONTEXTS

       SELinux requires files to have an extended attribute to define the file type.

       You can see the context of a file using the -Z option to ls

       Policy  governs the access confined processes have to these files.  SELinux ntpd policy is very flexible allowing users to setup their ntpd
       processes in as secure a method as possible.

       STANDARD FILE CONTEXT

       SELinux defines the file context types for the ntpd, if you wanted to store files with these types in a diffent paths, you need to  execute
       the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.

       semanage fcontext -a -t ntpd_exec_t '/srv/ntpd/content(/.*)?'
       restorecon -R -v /srv/myntpd_content

       Note: SELinux often uses regular expressions to specify labels that match multiple files.

       The following file types are defined for ntpd:

       ntpd_exec_t

       - Set files with the ntpd_exec_t type, if you want to transition an executable to the ntpd_t domain.

       Paths:
	    /etc/cron.(daily|weekly)/ntp-simple, /etc/cron.(daily|weekly)/ntp-server, /usr/sbin/ntpd

       ntpd_initrc_exec_t

       - Set files with the ntpd_initrc_exec_t type, if you want to transition an executable to the ntpd_initrc_t domain.

       ntpd_key_t

       - Set files with the ntpd_key_t type, if you want to treat the files as ntpd key data.

       Paths:
	    /etc/ntp/crypto(/.*)?, /etc/ntp/keys

       ntpd_log_t

       - Set files with the ntpd_log_t type, if you want to treat the data as ntpd log data, usually stored under the /var/log directory.

       Paths:
	    /var/log/ntp.*, /var/log/xntpd.*, /var/log/ntpstats(/.*)?

       ntpd_tmp_t

       - Set files with the ntpd_tmp_t type, if you want to store ntpd temporary files in the /tmp directories.

       ntpd_tmpfs_t

       - Set files with the ntpd_tmpfs_t type, if you want to store ntpd files on a tmpfs file system.

       ntpd_unit_file_t

       - Set files with the ntpd_unit_file_t type, if you want to treat the files as ntpd unit content.

       ntpd_var_run_t

       - Set files with the ntpd_var_run_t type, if you want to store the ntpd files under the /run or /var/run directory.

       ntpdate_exec_t

       - Set files with the ntpdate_exec_t type, if you want to transition an executable to the ntpdate_t domain.

       Paths:
	    /usr/sbin/sntp, /usr/sbin/ntpdate

       Note:  File context can be temporarily modified with the chcon command.	If you want to permanently change the file context you need to use
       the semanage fcontext command.  This will modify the SELinux labeling database.	You will need to use restorecon to apply the labels.

COMMANDS

       semanage fcontext can also be used to manipulate default file context mappings.

       semanage permissive can also be used to manipulate whether or not a process type is permissive.

       semanage module can also be used to enable/disable/install/remove policy modules.

       semanage port can also be used to manipulate the port definitions

       semanage boolean can also be used to manipulate the booleans

       system-config-selinux is a GUI tool available to customize SELinux policy settings.

AUTHOR

       This manual page was auto-generated using sepolicy manpage .

SEE ALSO

       selinux(8), ntpd(8), semanage(8), restorecon(8), chcon(1), sepolicy(8) , setsebool(8)

ntpd								     14-06-10							   ntpd_selinux(8)