I went to a computer store and the salesman sold me a SATA cable and told me that all SATA cables are the same. Another salesman at a different store told me a cable rated for SATA 2, which I bought, MIGHT work as well as one rate for SATA 3 but it is not guaranteed. I decided to run a speed test on my SSD drive to check the results.
I can verify from dmesg and /var/log/messages analysis that I am connected a 6.0gbps. Are my results consistent with that type of connection?
i purchased, what was labeled as a 4-port fast ethernet sbus card from ebay.
i installed it in my ultra1, and it seems to be working fine. how can i determine if the card is infact a fast ethernet card vs. the standard ethernet 4-port card? (7 Replies)
I am trying to find a command to return the "link" speed of the networks installed on AIX.
ifconfig - gives me where the link is up and the duplex setting. I need to determine for example if the ethernet connection is 10, 100, 1000 Mbs or what the current speed is based on the network media... (3 Replies)
Hello,
I have a Supermicro server with a P4SCI mother board running Debian Sarge 3.1. This is the "dmidecode" output related to RAM info:
RAM speed information is incomplete.. "Current Speed: Unknown", is there anyway/soft to get the speed of installed RAM modules? thanks!!
Regards :)... (0 Replies)
Hi guys
I have a bunch of x4100's x4140's etc with solaris 10 update4 running on them but I suspect that when a lot of these boxes were originally built, the jumpstart process used an update2 miniroot, now as far as i understand it, the miniroot used at jumpstart is the miniroot that stays on... (1 Reply)
I analysed disk performance with blktrace and get some data:
read:
8,3 4 2141 2.882115217 3342 Q R 195732187 + 32
8,3 4 2142 2.882116411 3342 G R 195732187 + 32
8,3 4 2144 2.882117647 3342 I R 195732187 + 32
8,3 4 2145 ... (1 Reply)
Hello
I've got a server with multiple NICS. In a script I want to log the outbound interface. Is there an easy way I can do this so that the output looks something like this:
host(xxx.xxx.xxx.xxx): Opening connection to ...
Obviously, getting the host is simple with hostname. But how... (4 Replies)
Being a novice user to linux i m little unaware of how would i check disk read write speed.
One of my mate is suggesting to create a file using dd command and check how much time it takes to create a 30 gb file .
I think this has a little sense however i would also like to take your reviews... (5 Replies)
Hello all,
I have a question about what you think the best practice is to determine what region you are running on when you have a system setup with a DEV/TEST, QA, and PROD regions running the same scripts in all.
So, when you run in DEV, you have a different directory structure, and you... (4 Replies)
Discussion started by: Rediranch
4 Replies
LEARN ABOUT OPENSOLARIS
si3124
si3124(7D) Devices si3124(7D)NAME
si3124 - SiliconImage 3124/3132 SATA controller driver
SYNOPSIS
sata@unit-address
DESCRIPTION
The si3124 driver is a SATA framework-compliant HBA driver that supports Silicon Image 3124 and 3132 SATA controllers. Note that while the
Silicon Image controllers supports standard SATA features including SATA-II disks, NCQ, hotplug, port multiplier and ATAPI disks, the
si3124 driver currently does not support NCQ, port multiplier or ATAPI features.
CONFIGURATION
There are no tunable parameters in the si3124.conf file.
FILES
/kernel/drv/si3124 32-bit ELF kernel module (x86).
/kernel/drv/amd64/si3124 64-bit ELF kernel module. (x86).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
|Availability |SUNWsi3124 |
+-----------------------------+-----------------------------+
SEE ALSO cfgadm(1M), prtconf(1M), cfgadm_sata(1M), attributes(5), nv_sata(7D), sata(7D)
Writing Device Drivers
SunOS 5.11 17 August 2007 si3124(7D)