Aggregated Etherchannel Post: 302568304

9 More Discussions You Might Find Interesting

1. AIX

EtherChannel network redundance problem

Problem description: On the condition of EtherChannel function of AIX, when the data exchange between the nodes on the network, there sometimes lost datat packets and cause the application failed. Once we deconfig EtherChannel and use the single adapter configuration, the application works...

2. AIX

Problem with Etherchannel

I'm trying to configure Etherchannel on AIX 5.3 and I'm having some problems. I am aggregating both of the onboard NIC's (ent0 and ent1) into a new adapter ent2 for failover reasons obviously. At first I was experiencing a problem where about 50% of all my packets would be dropped. Then after...

3. AIX

AIX / Etherchannel / VLANs

I have 1 AIX server, 4 dual ported fiber attached ethernet cards and 4 VLANS coming in. Is it possible to present those 8 ports as 1 IP address using etherchannel? Thanks.

4. Shell Programming and Scripting

Aggregated points

Combine points of specific key (a1) based on user defined size (lets say 200 in this example). so a1 191 and 191+200 and sum of all the values (4th column) and vice versa... Thanx a bunch! a1 191 201 1 a1 201 211 2 a1 211 221 1 a1 ....... .... a2......... ........

5. AIX

Can EtherChannel be a redundancy config?

I have one p5 server, no lpar, 2 physical network adapter, bundle as one EtherChannel. The two 2 physical network adapter connect to 2 network switches. How to make this as a redundancy config? Current is if one physical network adapter down, the seond one will go through the network. but if...

6. AIX

EtherChannel interface ping pelicularity

I have few AIX servers in my data center, which have their EtherChannel configured to have a fat pipe (active/active) and a nagios server to monitor the server uptimes. Nagios server pings every server in the data center and we have pretty much every known unix flavor in this data center. When...

7. UNIX for Dummies Questions & Answers

How to assign multiple IPs to Aggregated interface in Solaris 10?

I have 2 physical interfaces (bnx0 and bnx1) aggregated into aggr1. I need to assign second IP, and normally I know how to do it to physical interface (i.e. bnx0:1) however same trick (aggr1:1) is not working. Is there any way to do it?

8. Shell Programming and Scripting

Count aggregated command output using wc -l

Hi all, I need to run a bunch of commands seperated by ; but then count the total lines of output. Pipes and redirection don't seem to be helping me. Anyone know how I can do this properly: ls /usr/bin/nslookup ; ls /usr/sbin/lsof ; ls /sbin/ifconfig ; ls /usr/sbin/dmidecode ; ls...

9. AIX

Etherchannel failover testing

Hi Guys, I am trying to test an etherchannel failover and switchback. I did failover from primary to backup adapter, but now I am not able to switch it back to primary. phcxxxxx:/ > entstat -d ent4 | grep Active Active channel: backup adapter ...

LEARN ABOUT DEBIAN

cueconvert

cueconvert(1)						      General Commands Manual						     cueconvert(1)

NAME

       cueconvert - convert files between CUE and TOC formats

SYNOPSIS

       cueconvert [ -i format | --input-format=format ] [ -o format | --output-format=format ] [ infile [ outfile ] ]
       cueconvert --help

DESCRIPTION

       cueconvert  coverts files between the CUE and TOC formats, each of which are commonly used by compact disc ripping software to denote track
       breakpoints and other data.

       The operands are optional; if infile is not specified, cueconvert reads from standard input, and if outfile is not specified, it writes	to
       standard output.

       If no filenamess are specified, standard input is used, and an input format option must be specified.  The complementary format is used for
       output.

       If filenames are provided, but format options are not specified, the input and output formats will be guessed based on each filename's suf-
       fix (e.g., .cue or .toc).  This heuristic is case-insensitive.

OPTIONS

       -h, --help
	      displays a usage message and exits.

       -i format, --input-format=format
	      sets the expected format of the input file to format.

       -o format, --output-format=format
	      sets the format of the generated output file to format.

       The option argument format must be either cue or toc.

EXIT STATUS

       cueconvert exits with status zero if it successfully coverts the input file, and nonzero if there were problems.

AUTHOR

       Cuetools was written by Svend Sorensen.	Branden Robinson contributed fixes and enhancements to the utilities and documentation.

SEE ALSO

       cuebreakpoints(1), cueprint(1)

																     cueconvert(1)