Sponsored Content
Full Discussion: NIM client boot problem
Operating Systems AIX NIM client boot problem Post 302568066 by phobus on Wednesday 26th of October 2011 06:17:22 AM
Old 10-26-2011
Here is what I did:

1.Commented out line in inetd.conf "bootps"
2. run
Code:
/usr/sbin/bootpd -s -d -d -d

3. Created another partition in another managed system (no VIOS there) and used HEA logical port

And I was able to boot up. So I think I have something wrong with VIOS if I can not boot via virtual ethernet adapter but I can ping NIM master.
Here's config of VIOS:

Code:
$ lsdev -virtual
name             status      description
ent2             Available   Virtual I/O Ethernet Adapter (l-lan)
vhost0           Available   Virtual SCSI Server Adapter
vhost1           Available   Virtual SCSI Server Adapter
vhost2           Available   Virtual SCSI Server Adapter
vsa0             Available   LPAR Virtual Serial Adapter
testAIX1_dvg1    Available   Virtual Target Device - Logical Volume
testAIX1_nvg1    Available   Virtual Target Device - Logical Volume
testAIX1_rvg1    Available   Virtual Target Device - Logical Volume
testAIX2_rvg1    Available   Virtual Target Device - Logical Volume
testlpar_rvg1    Available   Virtual Target Device - Logical Volume
testlpar_rvg2    Available   Virtual Target Device - Logical Volume
vtopt0           Available   Virtual Target Device - File-backed Optical
vtopt1           Available   Virtual Target Device - File-backed Optical
ent3             Available   Shared Ethernet Adapter
ent4             Available   VLAN

Code:
$ lsdev -dev ent2 -attr
attribute      value          description                                user_settable

alt_addr       0x000000000000 Alternate Ethernet Address                 True
chksum_offload yes            Checksum Offload Enable                    True
copy_buffs     32             Transmit Copy Buffers                      True
copy_bytes     65536          Transmit Copy Buffer Size                  True
desired_mapmem 0              I/O memory entitlement reserved for device False
max_buf_huge   64             Maximum Huge Buffers                       True
max_buf_large  64             Maximum Large Buffers                      True
max_buf_medium 256            Maximum Medium Buffers                     True
max_buf_small  2048           Maximum Small Buffers                      True
max_buf_tiny   2048           Maximum Tiny Buffers                       True
min_buf_huge   24             Minimum Huge Buffers                       True
min_buf_large  24             Minimum Large Buffers                      True
min_buf_medium 128            Minimum Medium Buffers                     True
min_buf_small  512            Minimum Small Buffers                      True
min_buf_tiny   512            Minimum Tiny Buffers                       True
trace_debug    no             Trace Debug Enable                         True
use_alt_addr   no             Enable Alternate Ethernet Address          True

Code:
$ lsdev -dev ent3 -attr
attribute     value    description                                                        user_settable

accounting    disabled Enable per-client accounting of network statistics                 True
ctl_chan               Control Channel adapter for SEA failover                           True
gvrp          no       Enable GARP VLAN Registration Protocol (GVRP)                      True
ha_mode       disabled High Availability Mode                                             True
jumbo_frames  no       Enable Gigabit Ethernet Jumbo Frames                               True
large_receive no       Enable receive TCP segment aggregation                             True
largesend     0        Enable Hardware Transmit TCP Resegmentation                        True
netaddr       0        Address to ping                                                    True
pvid          50       PVID to use for the SEA device                                     True
pvid_adapter  ent2     Default virtual adapter to use for non-VLAN-tagged packets         True
qos_mode      disabled N/A                                                                True
real_adapter  ent0     Physical adapter associated with the SEA                           True
thread        1        Thread mode enabled (1) or disabled (0)                            True
virt_adapters ent2     List of virtual adapters associated with the SEA (comma separated) True

Code:
$ lsdev -dev ent4 -attr
attribute     value description       user_settable

base_adapter  ent3  VLAN Base Adapter True
vlan_priority 0     VLAN Priority     True
vlan_tag_id   50    VLAN Tag ID       True

All of them are on vlan ID 50.

Any idea?

---------- Post updated at 11:17 AM ---------- Previous update was at 11:05 AM ----------

Quote:
Originally Posted by johnf
Can you run the following and paste the results here:

Code:
ls -l /tftpboot

Code:
lsnim -c machines

Then I will have a further look at it.
Sure, there you go:

Code:
testAIX1:/ > ls -l /tftpboot
total 34688
lrwxrwxrwx    1 root     system           19 Oct 26 09:57 xxx.xxx.xxx.98 -> /tftpboot/test_lpar
lrwxrwxrwx    1 root     system           19 Oct 26 09:57 xxx.xxx.xxx.98.boot -> /tftpboot/test_lpar
lrwxrwxrwx    1 root     system           24 Oct 26 09:57 xxx.xxx.xxx.98.info -> /tftpboot/test_lpar.info
lrwxrwxrwx    1 root     system           29 Oct 26 09:57 xxx.xxx.xxx.98.iplrecord -> /tftpboot/test_lpar.iplrecord
-rw-r--r--    1 root     system     17751040 Oct 25 16:37 AIX71_TL00_SP01_spot.chrp.64.ent
-rw-r--r--    1 root     system          512 Oct 25 16:37 AIX71_TL00_SP01_spot.iplrecord.ent
lrwxrwxrwx    1 root     system           42 Oct 26 09:57 test_lpar -> /tftpboot/AIX71_TL00_SP01_spot.chrp.64.ent
-rw-r--r--    1 root     system         1100 Oct 26 09:57 test_lpar.info
lrwxrwxrwx    1 root     system           44 Oct 26 09:57 test_lpar.iplrecord -> /tftpboot/AIX71_TL00_SP01_spot.iplrecord.ent

Code:
testAIX1:/ > lsnim -c machines
master        machines       master
testAIX2      machines       standalone
test_lpar     machines       standalone

Thank you.

Last edited by phobus; 10-26-2011 at 07:32 AM..
 

10 More Discussions You Might Find Interesting

1. AIX

NIM client mksysb restore

Can a NIM client mksysb restore be performed via NIM (smitty nim) without the NIM client machine having the NIM server's IP and hostname in its /etc/hosts file? (10 Replies)
Discussion started by: kah00na
10 Replies

2. AIX

problem adding NIM client

Hello All, While trying to add NIM client to the NIM environment from NIM client machine, I get the following error: 1800-109 There are currently no additional SMIT screen entries available for this item. This may require installation of additional software before it can be accessed. ... (1 Reply)
Discussion started by: solaix14
1 Replies

3. AIX

backup NIM client

Hello everyone I would like to hear your opinions about this procedure to backup a client to my nim master 1.-I got a cron that make a mksysb from x machine 2.-This mksysb I send by ftp to my nim master. 3.-When I got it in the nim master machine. I create a mksysb resource from this... (2 Replies)
Discussion started by: lo-lp-kl
2 Replies

4. AIX

Back up a client NIM from nim master

Hello everyone Im trying to backup a nim client from nim master but I got this message COMMAND STATUS Command: failed stdout: yes stderr: no Before command completion, additional instructions may appear below. 0042-001 nim:... (2 Replies)
Discussion started by: lo-lp-kl
2 Replies

5. AIX

aix-configure nim client

:b:Hi... I need help to configure nim client on nim server.. can i define aix 5.3.4.0 on aix 5.3.7.0 nim server.. while i m configuring nim client on nim server its getting msg that images not same.. i need to confirm that both version should be same or not.. Thanks.. (5 Replies)
Discussion started by: sumathi.k
5 Replies

6. AIX

filesets nim client

Hello everyone I was looking for the filesets to install a nim client on a linux box. (red hat 5 for power) I have the nim master on aix box and I have different nim client with aix. I download some filesets fron aix cd to linux box, but Im still hang up. Some one know where I can find... (1 Reply)
Discussion started by: lo-lp-kl
1 Replies

7. AIX

NIM : remove nim client info from the client

Hi. I change my client's IP and hostname but I forgot to change anything on the master. How can I redefine or modify my client's resource from my master, or with using smit niminit from my client ? Tks (2 Replies)
Discussion started by: stephnane
2 Replies

8. AIX

Nim client with different subnet to Master

Iam attempting to add a client to NIM however the new client has a different subnet than master 10... & 193... , I've established from redbooks that it should be possible but can't find anything that states how? Does anyone use nim in this way? (5 Replies)
Discussion started by: gefa
5 Replies

9. AIX

Problem in communication nim client with nim master

Hello, I have an AIX6.1 machine which is a nim client to my nim master which is also AIX6.1 machine. I had some problem to perform an installation on my client using smit nim . i removed /etc/niminfo file in order to do the initialization again but when i run the command niminit -a name=client... (0 Replies)
Discussion started by: omonoiatis9
0 Replies

10. AIX

How to know NIM name from NIM client?

Friend's, I was playing around with NIM in my environment & had a quick question in mind which I didn't/couldn't find answer to, which is -- how to find the name of the NIM server sitting on the NIM client? All leads to the answer would be much appreciated, many thanks! -- Souvik (2 Replies)
Discussion started by: thisissouvik
2 Replies
All times are GMT -4. The time now is 11:33 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy