07-21-2011
Ok I am using RHEL 5.4 so there is no "rpmbuild / --rebuild".
I created a repo from my DVD and managed to install the necessary packages.
So I have run a "make install" on the e1000 src dir and all seem good until I try and include/add the module I get the following error:
insmod: error inserting <path_to_e1000.ko>: -1 Invalid module format
Has anybody seen this before or know what the problem might be?
5 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
HI,
When I do 'service network restart' , I am getting the following error.
"3c501 device eth0 does not seem to be present, delaying initialization"
Can any one suggest me the cause/solution for this?
When I do 'lspci' it is showing the ehternet card as
" Ethernet controller"Marvell... (2 Replies)
Discussion started by: praveen_b744
2 Replies
2. AIX
I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570? (4 Replies)
Discussion started by: rainbow_bean
4 Replies
3. Solaris
In my 2 node cluster (sun cluster3.2) running on x86 VMs. One of my nodes VM1 does not have the global devices populated due to which i cannot failover my file system to node VM1 , what could be the reason for this and how can i rectify it ?
VM1:/>cd /dev/global
-bash: cd: /dev/global: No... (1 Reply)
Discussion started by: fugitive
1 Replies
4. Red Hat
Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
... (0 Replies)
Discussion started by: Tanmoy
0 Replies
5. HP-UX
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Discussion started by: anuragr
4 Replies
ifpps(8) netsniff-ng-toolkit ifpps(8)
NAME
ifpps - fetch and format kernel network statistics
SYNOPSIS
ifpps -d|--dev <netdev> [-t|--interval <sec>][-p|--promisc][-c|--term]
[-C|--csv][-H|--csv-tablehead][-l|--loop][-v|--version][-h|--help]
DESCRIPTION
A tiny tool to provide top-like reliable networking statistics. ifpps reads out the 'real' kernel statistics, so it does not give
erroneous statistics on high I/O load.
OPTIONS
ifpps --dev eth0
Fetch eth0 interface statistics.
ifpps --dev eth0 --interval 60 --csv
Output eth0 interface statistics every minute in CSV format.
OPTIONS
-h|--help
Print help text and lists all options.
-v|--version
Print version.
-d|--dev <netdev>
Device to fetch statistics for i.e., eth0.
-p|--promisc
Put the device in promiscuous mode
-t|--interval <time>
Refresh time in sec (default 1 sec)
-c|--term
Output to terminal
-C|--csv
Output in CSV format. E.g. post-processing with Gnuplot et al.
-H|--csv-tablehead
Print CSV table head.
-l|--loop
Loop terminal output.
AUTHOR
Written by Daniel Borkmann <daniel@netsniff-ng.org>
DOCUMENTATION
Documentation by Emmanuel Roullit <emmanuel@netsniff-ng.org>
BUGS
Please report bugs to <bugs@netsniff-ng.org>
2012-06-29 ifpps(8)