06-08-2011
Corona,
Thank you for your post. I was unaware of the kernels associated with Linux for NTFS. The issue with setting up a Linux server for this would be that the servers operate on SAS drives and the data being brought back will be on SATA HDDs. We are running hardened versions of RHEL, and being pretty unfamiliar with the process of how these are all clustered or put together I wouldn't want to fiddle with the current set up too much.
Is there a purchasable solution to this? I know that a couple years ago they were working this same problem and ended up having to transfer the data over which would take at minimum 18 hours, which is what I am hoping to avoid.
9 More Discussions You Might Find Interesting
1. Slackware
I have a distant history with Dos based systems so I'm not overwhelmed, but my Unix experience is entirely limited to hacking my Tivo.
So I'm kindly requesting a pointer in the right direction specifically asking which Linux would best suit my needs...
What I want to do
I wish to use an old... (13 Replies)
Discussion started by: Mark Ward
13 Replies
2. Solaris
I've just replaced the secondary disk drive (was 4 Gb) with a Seagate Barracuda 7200 200 Gb. However the OS seems to think this is only 500 Mb and a spin speed of 5400, although it correct recognises the drive as Seagate ST3200822A.
I take it that it still thinks the old drive is attached. How... (5 Replies)
Discussion started by: wiggiesworld
5 Replies
3. Programming
hi everyone, im new here and am in desperate need of help. I want to convert my 32 bit unix time stamp ' 45d732f6' into a readable format (Sat, 17 February 2007 16:53:10 UTC) using c++.
I have looked around the interent but i just cant make sense of anything. All examples i can find just... (3 Replies)
Discussion started by: uselessprog
3 Replies
4. Filesystems, Disks and Memory
Hi there,
Here I have an old HP LC3 server from a client of ours.
The server was running in Raid1 Mirror mode.
Yesterday the server didn't boot anymore and now
I have concluded that 1 drive is damaged.
I pulled it out so it can boot from the "good" one.
Unfortuanally this didn't work.
I... (3 Replies)
Discussion started by: severt
3 Replies
5. Shell Programming and Scripting
Dear Experts,
I need your help to convert a unix date and time format number in to readable format like dd/mm/yyyy .
I have a text file of more than 10,000 records and it is like
NAME DATE1 COUNTRY DATE2
ABD 1223580395699 USA 1223580395699... (3 Replies)
Discussion started by: shary
3 Replies
6. UNIX for Dummies Questions & Answers
How would I convert a unix timestamp such as "1232144092" to a readable date such as "1/16/2009 10:14:28 PM" ?
I thought I could use date, but I don't think so now.. Any help would be great!! (4 Replies)
Discussion started by: Rhije
4 Replies
7. AIX
Hi Folks,
I am facing an issue with the performance.
P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes
P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
Discussion started by: filosophizer
7 Replies
8. Solaris
I just installed Solaris 11.2 - and it is a bugger. How do I mount an extra HDD that is now formated to NTFS through gparted
it keeps telling me I don't have any ntfs on this laptop. it has two hdds, /dev/sda1 /dev/sdb1 (Linux lingo) Solaris is installed on primary hard drive back of it. then... (2 Replies)
Discussion started by: userx-bw
2 Replies
9. Shell Programming and Scripting
Hello I have a file : file1.txt with the below contents :
237176 test1 test2 1442149024
237138 test3 test4 1442121300
237171 test5 test7 1442112823
237145 test9 test10 1442109600
In the above file fourth field represents the timestamp in Unix format.
I found a command which converts... (6 Replies)
Discussion started by: rahul2662
6 Replies
LEARN ABOUT DEBIAN
smp_rep_phy_event_list
SMP_REP_PHY_EVENT_LIST(8) SMP_UTILS SMP_REP_PHY_EVENT_LIST(8)
NAME
smp_rep_phy_event_list - invoke REPORT PHY EVENT LIST SMP function
SYNOPSIS
smp_rep_phy_event_list [--help] [--hex] [--index=IN] [--interface=PARAMS] [--raw] [--sa=SAS_ADDR] [--verbose] [--version] [--zero]
SMP_DEVICE[,N]
DESCRIPTION
Sends a SAS Management Protocol (SMP) REPORT PHY EVENT LIST function request to a SMP target. The SMP target is identified by the
SMP_DEVICE and the SAS_ADDR. Depending on the interface, the SAS_ADDR may be deduced from the SMP_DEVICE. The mpt interface uses SMP_DEVICE
to identify a HBA (an SMP initiator) and needs the additional ,N to differentiate between HBAs if there are multiple present.
OPTIONS
Mandatory arguments to long options are mandatory for short options as well.
-h, --help
output the usage message then exit.
-H, --hex
output the response (less the CRC field) in hexadecimal.
-i, --index=IN
starting phy event list descriptor index. ID is a value between 1 and 65535. Default is 1.
-I, --interface=PARAMS
interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See
the smp_utils man page for more information.
-r, --raw
send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr.
-s, --sa=SAS_ADDR
specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the SMP_DEVICE
has the target's SAS address within it. The SAS_ADDR is in decimal but most SAS addresses are shown in hexadecimal. To give a number
in hexadecimal either prefix it with '0x' or put a trailing 'h' on it.
-v, --verbose
increase the verbosity of the output. Can be used multiple times
-V, --version
print the version string and then exit.
NOTES
Similar information is maintained for SAS SSP target phys (e.g. on a SAS disk). It can be obtained from the Protocol Specific Port log page
with the sg_logs utility.
Similar information may be obtained for SAS initiator phys (e.g. on a SAS HBA). As an example in Linux 2.6.28 error information can be
found in this directory /sys/class/sas_phy/phy-4:0 (for the phy 0 in SCSI/SAS host 4).
Similar information may be obtained for SATA device phys (e.g. on a SATA disk). If there is a SAT layer between OS and the SATA device then
the sg_sat_phy_event utility can fetch the information.
CONFORMING TO
The SMP REPORT PHY EVENT LIST function was introduced in SAS-2 .
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2011 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
SEE ALSO
smp_utils, smp_phy_control, smp_rep_phy_event(smp_utils) sg_logs, sg_sat_phy_event(sg3_utils)
smp_utils-0.96 May 2011 SMP_REP_PHY_EVENT_LIST(8)