06-08-2011
Linux definitely has NTFS filesystem drivers. Two of them, even. You could set up a small Linux server for people to use.
Linux has two drivers because the one that comes with the kernel is read-only. The under-development driver, which can write, is more dangerous; they kept it out of the mainline kernel until they decide development is complete.
9 More Discussions You Might Find Interesting
1. Slackware
I have a distant history with Dos based systems so I'm not overwhelmed, but my Unix experience is entirely limited to hacking my Tivo.
So I'm kindly requesting a pointer in the right direction specifically asking which Linux would best suit my needs...
What I want to do
I wish to use an old... (13 Replies)
Discussion started by: Mark Ward
13 Replies
2. Solaris
I've just replaced the secondary disk drive (was 4 Gb) with a Seagate Barracuda 7200 200 Gb. However the OS seems to think this is only 500 Mb and a spin speed of 5400, although it correct recognises the drive as Seagate ST3200822A.
I take it that it still thinks the old drive is attached. How... (5 Replies)
Discussion started by: wiggiesworld
5 Replies
3. Programming
hi everyone, im new here and am in desperate need of help. I want to convert my 32 bit unix time stamp ' 45d732f6' into a readable format (Sat, 17 February 2007 16:53:10 UTC) using c++.
I have looked around the interent but i just cant make sense of anything. All examples i can find just... (3 Replies)
Discussion started by: uselessprog
3 Replies
4. Filesystems, Disks and Memory
Hi there,
Here I have an old HP LC3 server from a client of ours.
The server was running in Raid1 Mirror mode.
Yesterday the server didn't boot anymore and now
I have concluded that 1 drive is damaged.
I pulled it out so it can boot from the "good" one.
Unfortuanally this didn't work.
I... (3 Replies)
Discussion started by: severt
3 Replies
5. Shell Programming and Scripting
Dear Experts,
I need your help to convert a unix date and time format number in to readable format like dd/mm/yyyy .
I have a text file of more than 10,000 records and it is like
NAME DATE1 COUNTRY DATE2
ABD 1223580395699 USA 1223580395699... (3 Replies)
Discussion started by: shary
3 Replies
6. UNIX for Dummies Questions & Answers
How would I convert a unix timestamp such as "1232144092" to a readable date such as "1/16/2009 10:14:28 PM" ?
I thought I could use date, but I don't think so now.. Any help would be great!! (4 Replies)
Discussion started by: Rhije
4 Replies
7. AIX
Hi Folks,
I am facing an issue with the performance.
P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes
P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
Discussion started by: filosophizer
7 Replies
8. Solaris
I just installed Solaris 11.2 - and it is a bugger. How do I mount an extra HDD that is now formated to NTFS through gparted
it keeps telling me I don't have any ntfs on this laptop. it has two hdds, /dev/sda1 /dev/sdb1 (Linux lingo) Solaris is installed on primary hard drive back of it. then... (2 Replies)
Discussion started by: userx-bw
2 Replies
9. Shell Programming and Scripting
Hello I have a file : file1.txt with the below contents :
237176 test1 test2 1442149024
237138 test3 test4 1442121300
237171 test5 test7 1442112823
237145 test9 test10 1442109600
In the above file fourth field represents the timestamp in Unix format.
I found a command which converts... (6 Replies)
Discussion started by: rahul2662
6 Replies
LEARN ABOUT CENTOS
odbcinst.ini
odbcinst.ini(5) unixODBC manual pages odbcinst.ini(5)
NAME
/etc/odbcinst.ini - An unixODBC drivers configuration
DESCRIPTION
/etc/odbcinst.ini is a text configuration file for unixODBC drivers. It can be edited by hand, but the recommended way to update this file
is to use the odbcinst(1) utility.
FILE FORMAT
The general .ini file format is:
[SectionName1]
key1 = value1
key2 = value2
...
[SectionName2]
key1 = value1
key2 = value2
...
Each ODBC driver has its own section and can be referred to by the name of its section. Recognized configuration keys are:
Description
A text string briefly describing the driver.
Driver A filesystem path to the actual driver library.
Setup A filesystem path to the driver setup library.
FileUsage
odbcinst(1) entry, if you edit the configuration file by hand, you have to supply it yourself.
TEMPLATE FILES
The recommended way to manage the drivers is using the odbcinst(1) utility. You can install the drivers by supplying it with template file,
which has the same format as this file.
EXAMPLES
An example of the actual PostgreSQL driver:
[PostgreSQL]
Description = PostgreSQL driver for GNU/Linux
Driver = /usr/lib/psqlodbcw.so
Setup = /usr/lib/libodbcpsqlS.so
FileUsage = 1
By specifying the driver like that, you can then reference it in the odbc.ini(5) as follows:
Driver = PostgreSQL
The recommended way to add that driver is by creating template file containg:
[PostgreSQL]
Description = PostgreSQL driver for GNU/Linux
Driver = /usr/lib/psqlodbcw.so
Setup = /usr/lib/libodbcpsqlS.so
and call the odbcinst(1):
# odbcinst -i -d -f template.ini
SEE ALSO
odbcinst(1), odbc.ini(5)
AUTHORS
The authors of unixODBC are Peter Harvey <pharvey@codebydesign.com> and Nick Gorham <nick@easysoft.com>. For the full list of contributors
see the AUTHORS file.
COPYRIGHT
unixODBC is licensed under the GNU Lesser General Public License. For details about the license, see the COPYING file.
version 2.3.1 Thu 27 Jun 2013 odbcinst.ini(5)