04-30-2011
Lore,
The chipset RAID is "NOT" hardware RAID. It is firmware + Software RAID and usually requires a driver for windows.
My suggestion is that you do the following: Leave the disks alone in a JBOD function (Just another bunch of disks), without spanning, and use the operating system's own software RAID. You will then be able to use any current Linux based operating system to manage the devices you created.
On my setup, using OpenSUSE 11.3, I have my device /dev/md0 as my /boot, /dev/md1 as my operating system volumes (in a volume group) and /dev/md3 (I skip md2 in case I need more for the OS, but that's a habit, it is not required) is my file store.
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello,
I recently got my first "real" job, i come from a *microsoft* world, I'm being asked to setup from scratch a database and a webserver that allows users to view/add/edit data (intranet).
I installed Ubuntu Server 7.10 which comes with LAMP (apache 2.*, mysql5.* and php 5.*)
The only... (2 Replies)
Discussion started by: elzalem
2 Replies
2. Filesystems, Disks and Memory
Hi,
I have a server that I am adding a RAID that we purchased to. The server works fine. It is running Fedora 7 and is a Dell Precision 690.
When the RAID is attached, it boots up and says the following:
Controller Bus #00, Device#1F, Function#02: 00 Ports
No device found
AHCI BIOS not... (0 Replies)
Discussion started by: user23
0 Replies
3. Red Hat
I am planning on building a fedora box with raid controller (database server).
Is anybody done that ? also what kind of software do you need to backup and recover data. (1 Reply)
Discussion started by: amir07
1 Replies
4. UNIX for Dummies Questions & Answers
I need to put together a RAID1 file server for use by Windoze systems. I've built zillions of windows systems from components. I was a HPUX SE for a long time at HP, but have been out of the game for years.
I've got an old workhorse mobo FIC PA-2013 with a 450 MHz K6 III+ I could use, but I'd... (2 Replies)
Discussion started by: pcmacd
2 Replies
5. Solaris
Hi All!
I'm running Solaris 10 and SPARC and using
Let me give a bit of background before asking my question:
I have created a RAID 0 (stripe) on 2 disks, I have the OS running on a third disk and I have now performed a ufsdump / ufsrestore from my third disk to the RAID 0 disks... (7 Replies)
Discussion started by: Keepcase
7 Replies
6. Hardware
Hi guys.
if we want to use SSD drives on a database server, can we use RAID 0 configuration because of their reliability? (3 Replies)
Discussion started by: majid.merkava
3 Replies
7. Hardware
We have a 3ware RAID server at work, and as the appointed systems administrator (by virtue of being the one with the most knowledge) I've taken on the job of maintaining it. I've installed smartmontools on it to keep an eye on the drives and run scans every day, and looking at the data from the... (0 Replies)
Discussion started by: Krendoshazin
0 Replies
8. Red Hat
Hi Guys,
I want to some guidance from you in setting up the Live FTP server in Redhat Linux 6 with Static IP
120.50.150.50.
Now should I set my Static Public IP directly to my Linux machine?
If so what whould be my sunbet mask?
Is any type of natting required here? if so where would... (2 Replies)
Discussion started by: manalisharmabe
2 Replies
9. SCO
I need to be able to make a backup image of an OLD UNIX server HD where I can restore the complete HD from scratch if (when) the HD fails. This server runs the accounting system for a company.
I can and have backed the data up via local FTP, but O/S and Apps are so old that I am not sure I could... (21 Replies)
Discussion started by: chrishouse
21 Replies
LEARN ABOUT REDHAT
raidstop
raidstart(8) System Manager's Manual raidstart(8)
NAME
raidstart, raidstop, - command set to manage md devices.
SYNOPSIS
raidstart [options] <raiddevice>*
raidstop [options] <raiddevice>*
DESCRIPTION
RAID devices are virtual devices created from two or more real block devices. This allows multiple disks to be combined into a single
filesystem, possibly with automated backup and recovery. Linux RAID devices are implemented through the md device driver.
If you're using the /proc filesystem, /proc/mdstat gives you informations about md devices status.
Currently, Linux supports linear md devices, RAID0 (striping), RAID1 (mirrroring), and RAID4 and RAID5. For information on the various lev-
els of RAID, check out:
http://ostenfeld.dk/~jakob/Software-RAID.HOWTO/
for new releases of the RAID driver check out:
ftp://ftp.fi.kernel.org/pub/linux/daemons/raid/alpha
Avaible commands are :
mkraid : configures (creates) md (RAID) devices in the kernel, banding multiple devices into one.
raidstart : activates (starts) an existing 'persistent' md device
raid0run : activates old nonpersistent RAID0/LINEAR md devices
raidstop : turns off an md device, and unconfigures (stops) it
By default, a systems RAID configuration is kept in /etc/raidtab, which can configure multiple RAID devices.
All of these tools work similiarly. If -a (or --all) is specified, the specified operation is performed on all of the RAID devices men-
tioned in the configuration file. Otherwise, one or more RAID devices must be specified on the command line. For example:
raid0run -a
Starts all of the 'old' RAID0 RAID devices specified in /etc/raidtab. If only /dev/md1 should be started, the following command should be
used instead:
raidstart /dev/md1
OPTIONS
-a, --all
Apply the command to all of the configurations specified in the config file.
-c, --configfile filename
Use filename as the configuration file (/etc/raidtab is used by default).
-h, --help
Displays a short usage message, then exits.
-V, --version
Displays a short version message, then exits.
NOTES
The raidtools are derived from the md-tools and raidtools packages, which were originally written by Marc Zyngier, Miguel de Icaza, Gadi
Oxman, Bradley Ward Allen, and Ingo Molnar.
BUGS
no known bugs.
SEE ALSO
raidtab(5), raid0run(8), raidstop(8), mkraid(8)
raidstart(8)