Expect/telnet/testing tacacs on a cisco Post: 302474258

9 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Perl telnet to cisco router and compare the ping ms

All Please help, i will telnet to router to obain the ping status and compare, if higher than normal latency, i will have further action.. if i do the telent and in perl script then .... e.g the result i obtain from the router will be =' Success rate is 100 percent (5/5), round-trip...

2. Shell Programming and Scripting

Webpage to Telnet via Perl and Expect: Telnet problem?

Somewhat long story: I have a simple Perl CGI script that uses Expect to Telnet to a device and grab some data, and then spits it back to Perl for display on the Webpage. This works for many devices I've tried, but one device just fails, it keeps rejecting the password on this device, only...

3. Shell Programming and Scripting

Need help with Expect script for Cisco IPS Sensors, Expect sleep and quoting

This Expect script provides expect with a list of IP addresses to Cisco IPS sensors and commands to configure Cisco IPS sensors. The user, password, IP addresses, prompt regex, etc. have been anonymized. In general this script will log into the sensors and send commands successfully but there are...

4. Shell Programming and Scripting

perl telnet issue with cisco

Hi Experts, I am using perl to telnet on cisco boxes. We have this stupid cisco node which does not support "terminal Length0" command. Since I am using Net::Telnet and capturing output with @output = $telnet->cmd('cmd'); Say @output = $telnet->cmd('show version'); Now problem...

5. Shell Programming and Scripting

Perl variables inside Net::Telnet::Cisco Module doesn't work

I am writing perl script to configure Cisco device but Variables inside Net::Telnet::Cisco Module doesn't work and passed to device without resolving. Please advise. here is a sample of script: use Net::Telnet::Cisco; $device = "10.14.199.1"; ($o1, $o2, $o3, $o4) = split(/\./,$device);...

6. Shell Programming and Scripting

Bash script failed with expect on cisco routers

Hi all, I use a bash script which use expect to connect throught ssh and run command on a cisco router. The ssh connection with expect work fine, but the first command on the cisco router failed, I try to run the command in error by hand and it work fine... :( the first part of the script...

7. Shell Programming and Scripting

Perl Telnet cisco routers

Hi all i have little problem finding solution about simple telnet script .... i have 250 routers and on some i have different password and on some they ask just for password no username. So for example 1,2,3 have username and password (user,password) 4, and 5 have different username and password...

8. Shell Programming and Scripting

Expect script to show cisco configs

I know there are better ways to do this. I prefer snmp. I do not have the proper perl modules loaded on the platorm. Snmp isnt loaded on the platform. Telnet is not an option. I need to write an expect script to pull cisco equipment configs. The following code is executed once I gain...

9. Shell Programming and Scripting

Cisco, 2 ssh logins for expect /bash

HI all i need to connect to about 900 cisco routers and switch to do some configs changes. the issue i am having is that half the devices have one set of username and password and the other half have another username and password. From expect or bash script i can ssh into a device and make...

LEARN ABOUT DEBIAN

xrlogin

XRLOGIN(1)						      General Commands Manual							XRLOGIN(1)

NAME

       xrlogin - start an xterm that uses ssh (or optionally rlogin or telnet) to connect to a remote host

SYNOPSIS

       xrlogin [-l username] [-rlogin|-telnet] [xterm options] remote-host

DESCRIPTION

       Xrlogin opens an xterm window and runs ssh, rlogin or telnet to login to a remote host.

       Xrlogin	automatically  passes  the -name argument to xterm with a value of "xterm-hostname" where hostname is the name of the remote host.
       This allows the user to specify resources in their server's resource manager which are specific to xterms from a given host.  For  example,
       this  feature  can  be used to make all xterm windows to a given remote host be the same color or use a specific font or start up in a spe-
       cific place on the screen.  Xrsh(1) passes the same string so they are compatible in this regard.

       Xrlogin specifies that the default title for the new xterm will be "hostname" where hostname is the name of the remote host.  This and  the
       -name argument above can be overridden with xterm-options on the command line.

       One  could  also  use  xrlogin's sister command xrsh(1) to open a window to a remote host.  In the case of xrsh, the xterm would run on the
       remote host and use X as the connection protocol while xrlogin would run the xterm on the local host and use rlogin or telnet as  the  con-
       nection protocol.  See xrsh(1) for a discussion of the merits of each scheme.

OPTIONS

       -l username
	      When not using -telnet, use username as the id to login to the remote host.

       -rlogin
	      Use  the rlogin protocol to open the connection.	In general rlogin is preferred because it can be configured to not prompt the user
	      for a password.  Rlogin also automatically propagates window size change signals (SIGWINCH) to the remote host so that  applications
	      running there will learn of a new window size.

       -telnet
	      Use the -telnet protocol to open the connection. Use of telnet provided mostly for hosts that don't support rlogin.

COMMON PROBLEMS

       Make  sure  that  the  local  host  is  specified in the .rhosts file on the remote host or in the remote hosts /etc/hosts.equiv file.  See
       rlogin(1) for more information.

EXAMPLES

       xrlogin -bg red yoda
	      Start a local red xterm which connects to the remote host yoda using rlogin.

       xrlogin -telnet c70
	      Open a local xterm which connects to the remote host c70 using telnet.

SEE ALSO

       xrsh(1), rlogin(1), telnet(1)

AUTHOR

       James J. Dempsey <jjd@jjd.com> and Stephen Gildea <gildea@intouchsys.com>.

X Version 11							     Release 6								XRLOGIN(1)