ANYREMOTE2HTML(1)					      General Commands Manual						 ANYREMOTE2HTML(1)

NAME

       anyremote2html - web interface for anyRemote acting as HTTP server

SYNOPSIS

       anyremote2html -w web-port -a anyRemote-port [-i directory-with-icons] [-s 16|32|64] [-r refresh rate] [--width integer] [-d]

DESCRIPTION

       The  overall  goal  of this project is to provide remote control service on Linux through Bluetooth, InfraRed, Wi-Fi or just TCP/IP connec-
       tion.

       anyRemote supports a wide range of modern cell phones like Nokia, SonyEricsson, Motorola and others.

       It was developed as a thin "communication" layer between Bluetooth (IR, Wi-Fi)-capabled phones and Linux, and in theory it could be config-
       ured to manage almost any software.

       anyRemote is a console application, but in addition there are GUI front-ends for Gnome and KDE and this web front-end.

       With the help of this interface any device which contains a web browser and which can connect to the PC with anyRemote by TCP/IP (GPRS, Wi-
       Fi, ...)  could be used as a remote control.

USAGE

       Run anyremote/kanyremote with "-s socket:<port>" option:
       anyremote -s socket:5000 -f <cfg. file>

       Run anyremote2html -a <anyremote port> -w <http port> -s 16|32|64 -i <directory with icons>
       For example:
       anyremote2html -a 5000 -w 5050 -s 64 -i /usr/share/pixmaps/anyRemote2html

       Run browser on device and connect to http://<ip.of.PC>:5050

       For easier use and configuration of anyRemote as well as anyRemote2html, use either kAnyRemote or gAnyRemote.
       Further information is shipped with the anyRemote package.

OPTIONS

       -h, --help
	      Show summary of options.

       -w <web port>
	      Use specified port for HTTP server, default is 5550

       -a <anyRemote port>
	      Use specified port to connect to anyRemote, default is 5000

       -i <directory with icons>
	      Default is /usr/share/pixmaps/anyremote2html/

       -s 16|32|64
	      Use specified icon size, default is 64

       -r no|smart|<positive int>
	      Set refresh rate for web page, "no" means no refresh, "smart" means variable refresh rate (default)

       --width <positive int>
	      Assume screen width is specified value, default is 800

       -d     Show debug output

SEE ALSO

       anyremote(1), ganyremote(1x), kanyremote(1x).

BUGS

       If you find any bugs, please report to anyremote@mail.ru

AUTHOR

       anyremote2html was written by Mikhail Fedotov <anyremote@mail.ru>.

       This manual page was written by Philipp Huebner <debalance@debian.org>, for the Debian project (and may be used by others).

								 February  5, 2009						 ANYREMOTE2HTML(1)