All
Please help, i will telnet to router to obain the ping status and compare, if higher than normal latency, i will have further action..
if i do the telent and in perl script then ....
e.g the result i obtain from the router will be =' Success rate is 100 percent (5/5), round-trip... (4 Replies)
Somewhat long story:
I have a simple Perl CGI script that uses Expect to Telnet to a device and grab some data, and then spits it back to Perl for display on the Webpage.
This works for many devices I've tried, but one device just fails, it keeps rejecting the password on this device, only... (1 Reply)
This Expect script provides expect with a list of IP addresses to Cisco IPS sensors and commands to configure Cisco IPS sensors. The user, password, IP addresses, prompt regex, etc. have been anonymized. In general this script will log into the sensors and send commands successfully but there are... (1 Reply)
Hi Experts,
I am using perl to telnet on cisco boxes. We have this stupid cisco node which does not support "terminal Length0" command.
Since I am using Net::Telnet and capturing output with
@output = $telnet->cmd('cmd');
Say
@output = $telnet->cmd('show version');
Now problem... (2 Replies)
I am writing perl script to configure Cisco device but Variables inside Net::Telnet::Cisco Module doesn't work and passed to device without resolving.
Please advise.
here is a sample of script:
use Net::Telnet::Cisco;
$device = "10.14.199.1";
($o1, $o2, $o3, $o4) = split(/\./,$device);... (5 Replies)
Hi all,
I use a bash script which use expect to connect throught ssh and run command on a cisco router. The ssh connection with expect work fine, but the first command on the cisco router failed,
I try to run the command in error by hand and it work fine... :(
the first part of the script... (2 Replies)
Hi all
i have little problem finding solution about simple telnet script .... i have 250 routers and on some i have different password and on some they ask just for password no username. So for example 1,2,3 have username and password (user,password) 4, and 5 have different username and password... (0 Replies)
I know there are better ways to do this.
I prefer snmp. I do not have the proper perl modules loaded on the platorm. Snmp isnt loaded on the platform. Telnet is not an option. I need to write an expect script to pull cisco equipment configs.
The following code is executed once I gain... (0 Replies)
HI all
i need to connect to about 900 cisco routers and switch to do some configs changes. the issue i am having is that half the devices have one set of username and password and the other half have another username and password. From expect or bash script i can ssh into a device and make... (0 Replies)
Discussion started by: quintin
0 Replies
LEARN ABOUT OPENSOLARIS
telnetrc
telnetrc(4) File Formats telnetrc(4)NAME
telnetrc - file for telnet default options
DESCRIPTION
The .telnetrc file contains commands that are executed when a connection is established on a per-host basis. Each line in the file con-
tains a host name, one or more spaces or tabs, and a telnet(1) command. The host name, DEFAULT, matches all hosts. Lines beginning with the
pound sign (#) are interpreted as comments and therefore ignored. telnet(1) commands are case-insensitive to the contents of the .telnetrc
file.
The .telnetrc file is retrieved from each user's HOME directory.
EXAMPLES
Example 1: A sample file.
In the following example, a .telnetrc file executes the telnet(1) command, toggle:
weirdhost toggle crmod
# Always export $PRINTER
DEFAULT environ export PRINTER
The lines in this file indicate that the toggle argument crmod, whose default value is "off" (or FALSE), should be enabled when connecting
to the system weirdhost. In addition, the value of the environment variable PRINTER should be exported to all systems. In this case, the
DEFAULT keyword is used in place of the host name.
FILES
$HOME/.telnetrc
SEE ALSO telnet(1), in.telnetd(1M), environ(5)SunOS 5.10 9 Jan 1998 telnetrc(4)