How detect TCP/IP socket shutdown when ethernet cable is disconnected Post: 302436006

10 More Discussions You Might Find Interesting

1. Solaris

Monitor displays Cable disconnected

Hi all This is my first post in this forums. I hope some one can help me with this my Sun Ultra 60 worked fine couple of months back when i used a dell (1280x1024). i move to a MN last month n bought a new sony monitor with (1280x1024) but when i connect it to the box it monitor displays...

2. Programming

can-not detect TCP disconnects well

Hello everyone. Thanks for reading. I am using Ubuntu 7.04 to experience this problem: I have written my own programs that communicate to eachother and I am having a hard time detecting a TCP socket disconnect when the remote side's computer has a power-failure (for example). On the computer...

3. Red Hat

[RHEL4.5] server shutdown when I unplug the ethernet cable

hi.. I unplug my eth0 lan cable.. and suddenly my system shutdown... no idea :eek::confused:

4. IP Networking

How to handle unplugging ethernet cable in socket programming

Hi, I am trying to implement a server-client socket communication. My server and clients are in different PCs. During communications if the ethernet cable is removed from the server side it shows broken pipe due to unable to write on the socket. I want to know how to check whether the ethernet...

5. IP Networking

Two Servers via ethernet crossover cable

Hi, I'm trying to communicate two servers (HP DLProliant 380 G5) via a crossover cable, but I don't get them to ping each other. I am working in RHEL 4. These are the steps I've performed: 1) Plugged the crossover cables in eth2. (note: The cable is brand new. Also I built one myself...

6. UNIX for Dummies Questions & Answers

How to change ethernet cable of iscsi initiator (iscsi client)?

how to change ethernet cable of iscsi initiator (iscsi client)

7. AIX

How to detect the network cable status with c programming on AIX

Hello, Is there any API or any other approach to detect whether the network cable is connected to the network adapter, say, en0, en1 or en2? The OS is AIX6.1. Thank you.

8. Programming

[C++] [Unix] TCP non-blocking. Detect server disconnection procedure over, from client.

Hello! I searched forum for similar topic, with no luck, if you know one, delete this topic, and send me private message with link please. Little background: I have a lot of clients and one serwer. Client can make multiple connections on different ports and ips, but only one can be acctive...

9. IP Networking

Packets sent from Linux TCP socket

Hello, Our software is using a TCP socket (AF_INET, SOCK_STREAM) to communicate with an Ethernet device. When we send a message, the message object writes itself in full onto the socket's stream buffer before the software invokes send() from socket.h. I'm still researching, but have 2...

10. IP Networking

Detect Socket timeout in tcpdump capture

Hello, I detect these errors in my logs : Socket timeout calling url http://server:port/bla/soap/selfcare/infoRapide] Unable to make proxyRequest I've made a tcpdump capture this way : tcpdump -i eth0 -s 0 -w /app/captura.pcap port 8080 But I'm fairly new in reading .pcap files with...

LEARN ABOUT DEBIAN

setether

SETETHER(8)						      System Manager's Manual						       SETETHER(8)

NAME

       setether - Set the ethernet address for use with DECnet

SYNOPSIS

       setether <if> [<if>...]|all [options]

DESCRIPTION

       Set ethernet MAC address on ethernet adaptors

       This  script should be run at system startup. It will change the ethernet hardware (MAC) address of any or all ethernet interfaces to match
       the DECnet node address. DECnet requires that the MAC address of all ethernet adaptors running the protocol be set approriately.  If you do
       not run setether then you must change the ethernet address in some other way for DECnet to work.
       By  default no ethernet interfaces will have their MAC addresses changed by setether, if you specify all then all interfaces name eth* will
       be changed, otherwise a list of interface names can be specified.  setether will enable (UP) all interfaces it changes  the  MAC  addresses
       of.
       (2.4  only) The first interface specified on the command-line will also be made the default interface for DECnet operations (ie attempts to
       contact nodes not in the neighbour table will be done over this interface).
       This script must be run with the interface inactive, it is normally run from /etc/init.d/decnet before TCP/IP starts up.

EXAMPLES

       set the MAC address of eth0.

	   # /sbin/setether eth0

       set the MAC address of all ethernet interfaces

	   # /sbin/setether all

HELPFUL HINTS

       If you have multiple ethernet cards on your system and they are connected to the the same network you should specify which one you want	to
       use  for DECnet communication on the setether command line, otherwise they will both be given the same MAC address and this is probably not
       what you want.
       Running DECnet on multiple ethernet interfaces only works under Linux 2.4. If you are running Linux 2.2 then  the  interface  name  on  the
       setether command line must match the one in /etc/decnet.conf(5).

SEE ALSO

       decnet.conf(5), dntype(1), dndir(1), dndel(1), dnetd(8), dnping(1)

DECnet utilities						   March 01 2001						       SETETHER(8)

10 More Discussions You Might Find Interesting

1. Solaris

Monitor displays Cable disconnected

Discussion started by: venuavula

2. Programming

can-not detect TCP disconnects well

Discussion started by: pjwhite

3. Red Hat

[RHEL4.5] server shutdown when I unplug the ethernet cable

Discussion started by: flekzout

4. IP Networking

How to handle unplugging ethernet cable in socket programming

Discussion started by: JagadishB