SUN Ultra 10 won't boot - Help Please Post: 302407456

10 More Discussions You Might Find Interesting

1. Solaris

sun ultra or sun sparkstation

am wonder wich sun computer is better, a sun ultra or sun sparkstation, and what is the difference

2. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me...

3. Solaris

Ultra 60 won't boot

I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the...

4. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD...

5. Solaris

Sun Fire won't boot anymore

Hi all - I have an issue with our (way old) single processor SunFire 280R, running Solaris 9.0.4. It won't boot even after multiple power cycles. There was a power outage last week end in the computer room, so this might have to do. In normal boot mode, the screen shows a single line : ...

6. Solaris

Sun Sparc Ultra 4 won't boot - disk errors

Hi all. I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'. I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to...

7. Solaris

Ultra 5 will not boot from DVD ROM :(

Hi, I just got a new Ultra 5 and replaced the CD-ROM with an LG DVD-ROM (approved and listed in Sun HCL). Got the DVD-ROM installed to install Solaris 10. Im just learning and new to Solaris installation. When I insert a Solaris 10 DVD I see that it gets mounted and File Manager opens and...

8. Solaris

Ultra 45 Boot Loop

I am trying to get an old Ultra 45 to boot and it is stuck in a loop. I cannot get anything to come up on a monitor, so when I hook up a serial connection to the TTYa interface I see the following output: @(#)OBP 4.21.2 2005/12/22 17:17 Sun Ultra 45 Workstation Clearing TLBs Loading...

9. UNIX for Beginners Questions & Answers

Sun ultra 30 boot problem

Hi all, I've got a Sun ultra 30 workstation. the Nvram battery died so I replaced it. I reprogrammed the mac address using the mlpl command all that so it booted without error. But for some reason I was trying to boot via the network. So I did a STOP A and boot disk1 which is the alias for my SCSI...

10. Solaris

Sun Ultra 30 boot problems

Hi all, I've just replaced the eprom battery on my Sun Ultra-30 and having boot issues. For some reason its trying to boot off the network instead of the DISK1. Howe can I change it so the open boot does not default to the boot device: NET Thanks, Rob

LEARN ABOUT NETBSD

siop

SIOP(4) 						   BSD Kernel Interfaces Manual 						   SIOP(4)

NAME

     siop -- Symbios Logic/NCR 53c8xx SCSI driver

SYNOPSIS

   hp700
     siop* at mainbus? irq 3
     siop* at phatomas? irq 3

   PCI
     siop* at pci? dev ? function ?

     options SIOP_SYMLED
     scsibus* at siop?

DESCRIPTION

     The siop driver provides support for the Symbios Logic/NCR 53x8xx series of SCSI controller chips:

	   -   53c810, 53c810a and 53c815 (Fast SCSI)
	   -   53c820, 53c825 and 53c825a (Fast-Wide SCSI)
	   -   53c860 (Ultra SCSI)
	   -   53c875 and 53c875j (Ultra-Wide SCSI)
	   -   53c876 (Dual Ultra-Wide SCSI)
	   -   53c885 (Ultra-Wide SCSI and Ethernet)
	   -   53c895 (Ultra2-Wide SCSI)
	   -   53c896 (PCI 64bit, dual Ultra2-Wide SCSI)
	   -   53c1010-33 (PCI 64bit, dual Ultra160 SCSI)
	   -   53c1510d (PCI 64bit, dual Ultra2-wide SCSI)
     The SIOP_SYMLED option causes the driver to report SCSI activity on the GPIO pin 1, which is connected to the activity LED on some adapters.
     At this time only the 53c895 based Symbios and Tekram adapters are known to require this.

     If both siop and the esiop(4) drivers are compiled, esiop(4) will take precedence for controllers it supports.

SEE ALSO

     cd(4), ch(4), esiop(4), intro(4), pci(4), scsi(4), sd(4), st(4), uk(4)

HISTORY

     The siop driver first appeared in NetBSD 1.5.

AUTHORS

     The siop driver was written by Manuel Bouyer <Manuel.Bouyer@lip6.fr> for NetBSD.

BUGS

     siop supports the 53c1010-33 in Ultra2-wide mode only.  Use esiop(4) for Ultra160 support.

BSD
								   April 5, 2008							       BSD