SUN Ultra 10 won't boot - Help Please Post: 302407398

10 More Discussions You Might Find Interesting

1. Solaris

sun ultra or sun sparkstation

am wonder wich sun computer is better, a sun ultra or sun sparkstation, and what is the difference

2. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me...

3. Solaris

Ultra 60 won't boot

I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the...

4. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD...

5. Solaris

Sun Fire won't boot anymore

Hi all - I have an issue with our (way old) single processor SunFire 280R, running Solaris 9.0.4. It won't boot even after multiple power cycles. There was a power outage last week end in the computer room, so this might have to do. In normal boot mode, the screen shows a single line : ...

6. Solaris

Sun Sparc Ultra 4 won't boot - disk errors

Hi all. I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'. I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to...

7. Solaris

Ultra 5 will not boot from DVD ROM :(

Hi, I just got a new Ultra 5 and replaced the CD-ROM with an LG DVD-ROM (approved and listed in Sun HCL). Got the DVD-ROM installed to install Solaris 10. Im just learning and new to Solaris installation. When I insert a Solaris 10 DVD I see that it gets mounted and File Manager opens and...

8. Solaris

Ultra 45 Boot Loop

I am trying to get an old Ultra 45 to boot and it is stuck in a loop. I cannot get anything to come up on a monitor, so when I hook up a serial connection to the TTYa interface I see the following output: @(#)OBP 4.21.2 2005/12/22 17:17 Sun Ultra 45 Workstation Clearing TLBs Loading...

9. UNIX for Beginners Questions & Answers

Sun ultra 30 boot problem

Hi all, I've got a Sun ultra 30 workstation. the Nvram battery died so I replaced it. I reprogrammed the mac address using the mlpl command all that so it booted without error. But for some reason I was trying to boot via the network. So I did a STOP A and boot disk1 which is the alias for my SCSI...

10. Solaris

Sun Ultra 30 boot problems

Hi all, I've just replaced the eprom battery on my Sun Ultra-30 and having boot issues. For some reason its trying to boot off the network instead of the DISK1. Howe can I change it so the open boot does not default to the boot device: NET Thanks, Rob

LEARN ABOUT DEBIAN

fceu

FCEU(6) 							   Games Manual 							   FCEU(6)

NAME

       fceu - An emulator for the original (8-bit) Nintendo game console.

SYNOPSIS

       fceu [options] "filename"

DESCRIPTION

       FCE Ultra is an emulator for the original (8-bit) Nintendo Entertainment System (NES).  It has a robust color palette rendering engine that
       is fully customizable, along with excellent sound and joystick support, and even includes TCP/IP based  network	playing  for  head-to-head
       gaming with your friends!

OPTIONS

       These are some of the more frequently used options in FCE Ultra.  Run fceu without any options for a larger list, or see the README for the
       full list.

       -fs {0|1}
	      Toggle full-screen mode.

       -xres <res>
	      Set the Horizontal resolution for full-screen mode.

       -yres <res>
	      Set the Vertical resolution for full-screen mode.

       -gg    Enable Game Genie emulation support.

       -cpalette <file>
	      Use the custom palette in <file>.

       -soundvol <percentge>
	      Sets the sound volume to the given percentage.

       -sound <rate>
	      Set the sound playback sample rate (0 == off).

       -connect <server>
	      Connect as a client (player 2) to <server> for TCP/IP network play.

       -server
	      Be a host server (player 1) for a TCP/IP network game.

       -netport <portnum>
	      Use <portnum> for TCP/IP network play.  Default is 4046.

KEYBOARD COMMANDS

       FCE Ultra has a number of commands available within the emulator.  It also provides keyboard bindings for emulating gamepads or powerpads.

   Gamepad Keyboard Bindings
							      +------------+---------------+
							      |NES Gamepad |   Keyboard    |
							      +------------+---------------+
							      |  Arrows    | Cursor Arrows |
							      |     A	   |   Left ALT    |
							      |     B	   |   Left CTRL   |
							      |  Select    |	  TAB	   |
							      |   Start    |	 ENTER	   |
							      +------------+---------------+
   Other Commands
       <F2>	      Activate cheat interface.

       <F4>	      Toggle full-screen mode.

       <F5>	      Save game state into current slot (set using number keys).

       <F7>	      Restore game state from current slot (set using number keys).

       <F9>	      Save screen snapshot.

       <F10>	      Reset NES.

       <F11>	      Toggle power to NES.

       <F12>, <ESC>   Quit FCE Ultra.

SEE ALSO

       /usr/share/doc/fceu/fceultra.html The FCE Ultra README file.

       http://fceultra.sourceforge.net/
	      The FCE Ultra project homepage.

AUTHOR

       This manual page was written by Joe Nahmias <joe@nahmias.net>, for the Debian GNU/Linux system (but may be used by others).

								 October 10, 2004							   FCEU(6)