Sun documentation about zone cloning describe if zone cloning, which zonepath is on a ZFS pool, zone will be cloning by zfs snapshot. On my system zones cloned by files copying. How I can troubleshoot that?
Hello Guruz,
I am unable see the zone cloning option in zoneadm command, I guess the option if not available with the current OS release (Solaris 10 1/06).
Could some one let me know if there any specific patch is available for the same?.
My zoneadm o/p as follows.
Zoneadm
usage: ... (18 Replies)
I have two physical servers, with zones that mount local storage.
We were using "raw device" in the zonecfg to point to a metadevice on the global zone (it was not mounted in the global zone at any point).
It failed to mount on every boot because the directory existed in the zone.
I... (6 Replies)
Hi Guys
I have one Global Zone and 2 non-global zones.
root@solar109
# zoneadm list -icv
ID NAME STATUS PATH BRAND IP
0 global running / native shared
20 solar109b running ... (1 Reply)
Hi all
I want to know if suppose my global zone has UFS root file system & now I want to create non global zone with ZFS root file system. Is it possible.....If this is possible then how will I able to create zone based on ZFS root file system in global zone having UFS based root file system (5 Replies)
Hi ,
I added a new fs to the global zone and also did the zonecfg to add the FS to the zone but finally I do not see the new "FS" on the local zone.
Even in th e/etc/zones/zone.xml the fs and the correct directory is mentioned.
Any Idea please ? (4 Replies)
Hi Guys,
I have a non-global zone in which has apache application on it. There is a ZFS filesystem where the app saves the log. Even after deleting the logfiles I dont see the space being freed up. There are no snapshots or anything at all
Zpool info
NAME SIZE ALLOC FREE CAP HEALTH ALTROOT... (8 Replies)
Dear all,
recently, I migrated a solaris zone from one host to another. The zone was inside of a zpool. The zpool cotains two volumes.
I did the following:
host1:
$ zlogin zone1 shutdown -y -g0 -i0 #Zone status changes from running to installed
$ zpool export zone1
host2:
$ zpool... (2 Replies)
Discussion started by: custos
2 Replies
LEARN ABOUT OPENSOLARIS
native
native(5) Standards, Environments, and Macros native(5)NAME
native - native branded zone
DESCRIPTION
The native brand uses the branded zones framework described in brands(5) to run zones installed with the same software as is installed in
the global zone. The system software must always be in sync with the global zone when using a native brand.
SUB-COMMANDS
The following native brand-specific subcommand options are supported in zoneadm(1M).
attach [-u] [-b patchid]...
For native zones, zoneadm checks package and patch levels on the machine to which the zone is to be attached. If the packages/patches
that the zone depends on from the global zone are different (have different revision numbers) from the dependent packages/patches on
the source machine, zoneadm reports these conflicts and does not perform the attach. If the destination system has only newer dependent
packages/patches (higher revision numbers) than those on the source system, you can use the -u option to update the attached zone to
match the -revision packages and patches that exist on the new system. With -u, as in the default behavior, zoneadm does not perform an
attach if outdated packages/patches are found on the target system.
For native zones, one or more -b options can be used to specify a patch ID for a patch installed in the zone. These patches will be
backed out before the zone is attached or, if -u was also specified, updated.
install [-a archive] | [-d path] [-p] [-s] [-u] [-v] [-b patchid]...
The native brand installer supports installing the zone from either the software already installed on the system or from an image of an
installed system running the same release. This can be a full flash archive (see flash_archive(4)) or a cpio(1) or pax(1) "xustar" ar-
chive. The cpio archive be compressed with gzip or bzip2. The image can also be a level 0 ufsdump(1M), a path to the top-level of a
system's root tree, or a pre-existing zone path.
With no options the zone is installed using same software as is running the global zone.
To install the zone from a system image either the -a or -d is required. Either the -u or -p option is also required in this case.
-a archive
The path to a flash_archive(4), cpio(1), or pax(1) "xustar" archive, or a level0 ufsdump(1M), of an installed system. cpio archives
may be compressed using gzip or bzip2.
-b patchid
One or more -b options can be used to specify a patch ID for a patch installed in the system image. These patches will be backed
out during the installation process.
-d path
The path to the root directory of an installed system. If path is a hyphen (-), the zonepath is presumed to be already populated
with the system image.
-p
Preserve the system configuration after installing the zone.
-s
Install silently.
-u
Run sys-unconfig(1M) on the zone after installing it.
-v
Verbose output from the install process.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWzoneu |
+-----------------------------+-----------------------------+
|Interface Stability |Uncommitted |
+-----------------------------+-----------------------------+
SEE ALSO cpio(1), pax(1), zlogin(1), zonename(1), sys-unconfig(1M), ufsdump(1M), zoneadm(1M), zonecfg(1M), flash_archive(4), attributes(5),
brands(5), privileges(5), zones(5), lx_systrace(7D)SunOS 5.11 13 Feb 2009 native(5)