12-08-2009
Dear incredible
First of sorry for the replying on this thread late as I was not well for last few days. Thanks for the reply. When I run the following command as suggested by you. I find the follwing output
# luxadm -e port
/devices/pci@1/pci@0/pci@7/pci@0/pci@2/SUNW,emlxs@0/fp@0,0:devctl NOT CONNECTED
/devices/pci@1/pci@0/pci@7/pci@0/pci@8/SUNW,emlxs@0/fp@0,0:devctl NOT CONNECTED
When I run the man page of luxadm command I didn't find "port" option. Could explain me bit more about this command. As -e option explain that its a expert mode only.
I couldn't find lputil utility in my Solaris OS also
Regards
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
well, I came in today to a raft of messages that users couldn't email from UNIX (HP-UX B.11.23 U i64)
/etc/mail/sendmail.cf was missing - just GONE from the directory. Other files were there.
mail was successfully sent at 19:48 last night and unsuccessful at 00:10. At least those are times... (5 Replies)
Discussion started by: LisaS
5 Replies
2. IP Networking
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies
3. Solaris
I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install?
Thanks in advance.... (23 Replies)
Discussion started by: Y4Net
23 Replies
4. AIX
Hi All,
I have a task to complete on several server, I need advice from u guys,i need to know that , how can i check the following thing in AIX server.
1)HBA vendor, HBA model, HBA driver version & HBA firmware.
2) Multipath software & multipath version.
3) Cluster software & cluster... (2 Replies)
Discussion started by: gulamibrahim
2 Replies
5. Solaris
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies
6. Solaris
Gents,
I am new with Solaris and working on couple of Solaris 8 and 9's.
1. ) I am having issues finding which model of HBA is connected to the host.
I got a link to kb qlogic com/KanisaPlatform/Publishing/130/10441_f.html
But, it is incomplete as read in many places.. Do we have updated... (5 Replies)
Discussion started by: abcd.us786
5 Replies
7. UNIX for Dummies Questions & Answers
Hi all,
I have an environment with Aix and Linux severs zoned to tape drives
I'd like to list HBAs WWN on my servers which are zoned to the drives.
Thanks (1 Reply)
Discussion started by: Sara_84
1 Replies
8. AIX
This thread is about using tar & other compression utilities on AIX ;
1. Find out which version of tar you are using
thanks to bakunin
>what $(which tar)
/usr/bin/tar:
61 1.14 src/bos/usr/ccs/lib/libc/__threads_init.c, libcthrd, bos53 0 7/11/00 12:04:14
10 ... (21 Replies)
Discussion started by: filosophizer
21 Replies
9. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
10. Red Hat
hi all,
I am trying to view the hba cards on a rhel7 server (storage says they are there, but I am not seeing them.
I tried lspci -nn | grep -i hba
lspci |grep qla
I tried looking in /sys/class/fc_host.. but it is empty.
I am not sure if I am looking in the right spot... (0 Replies)
Discussion started by: gartie
0 Replies
sysdef(1M) System Administration Commands sysdef(1M)
NAME
sysdef - output system definition
SYNOPSIS
/usr/sbin/sysdef [-i] [-n namelist]
/usr/sbin/sysdef [-h] [-d] [-i] [-D]
DESCRIPTION
The sysdef utility outputs the current system definition in tabular form. It lists all hardware devices, as well as pseudo devices, system
devices, loadable modules, and the values of selected kernel tunable parameters.
It generates the output by analyzing the named bootable operating system file (namelist) and extracting the configuration information from
it.
The default system namelist is /dev/kmem.
OPTIONS
-i Prints the configuration information from /dev/kmem. This is the default and only needs to be specified if the configura-
tion information from both /dev/kmem and the system file specified with the "-n namelist" option is needed.
-nnamelist Specifies a namelist other than the default (/dev/kmem). The namelist specified must be a valid bootable operating system.
-h Prints the identifier of the current host in hexadecimal. This numeric value is unique across all Sun hosts.
-d The output includes the configuration of system peripherals formatted as a device tree.
-D For each system peripheral in the device tree, display the name of the device driver used to manage the peripheral.
EXAMPLES
Example 1: Sample output format
The following example displays the format of the sysdef -d output:
example% sysdef -d
Node 'SUNW,Ultra-5_10', unit #-1
Node 'packages', unit #-1 (no driver)
Node 'terminal-emulator', unit #-1 (no driver)
Node 'deblocker', unit #-1 (no driver)
Node 'obp-tftp', unit #-1 (no driver)
Node 'disk-label', unit #-1 (no driver)
Node 'SUNW,builtin-drivers', unit #-1 (no driver)
Node 'sun-keyboard', unit #-1 (no driver)
Node 'ufs-file-system', unit #-1 (no driver)
Node 'chosen', unit #-1 (no driver)
Node 'openprom', unit #-1 (no driver)
Node 'client-services', unit #-1 (no driver)
Node 'options', unit #0
Node 'aliases', unit #-1 (no driver)
Node 'memory', unit #-1 (no driver)
Node 'virtual-memory', unit #-1 (no driver)
Node 'pci', unit #0
Node 'pci', unit #0
Node 'ebus', unit #0
Node 'auxio', unit #-1 (no driver)
Node 'power', unit #0
Node 'SUNW,pll', unit #-1 (no driver)
Node 'se', unit #0 (no driver)
Node 'su', unit #0
Node 'su', unit #1
Node 'ecpp', unit #-1 (no driver)
Node 'fdthree', unit #0
Node 'eeprom', unit #-1 (no driver)
Node 'flashprom', unit #-1 (no driver)
Node 'SUNW,CS4231', unit #0 (no driver)
Node 'network', unit #0
Node 'SUNW,m64B', unit #0
Node 'ide', unit #0
Node 'disk', unit #-1 (no driver)
Node 'cdrom', unit #-1 (no driver)
Node 'sd', unit #1
Node 'dad', unit #1
Node 'pci', unit #-1 (no driver)
Node 'SUNW,UltraSPARC-IIi', unit #-1 (no driver)
Node 'pseudo', unit #0
[output truncated]
FILES
/dev/kmem default operating system image
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO
hostid(1), prtconf(1M), nlist(3ELF), attributes(5)
SunOS 5.10 4 Oct 2004 sysdef(1M)