Solaris 10 Speed and Duplex Settings: bge Post: 302349316

10 More Discussions You Might Find Interesting

1. Solaris

Duplex Settings

Hi All I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that. How do I: 1. Check the duplex settings on my eri0 card? 2. Set the...

2. IP Networking

NIC speed 100M/full duplex problem

I have a TOSHIBA AS7000 B150 Sun Box I wanted to run it with 100M/full duplex I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot. set eri:eri_adv_100fdx_cap=1 set eri:eri_adv_100hdx_cap=0 set eri:eri_adv_autoneg_cap=0 But when I...

3. HP-UX

command to change duplex settings..

Hi Folks, I want the command to change the duplex settings of a HP-UX server. Thanks in advance. Sagar.

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Hi there We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is. As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only...

5. UNIX for Advanced & Expert Users

How to set full duplex for solaris 5.5

I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5. #ndd -set /dev/le adv_100fdx_cap 1

6. Infrastructure Monitoring

How to find the duplex speed on Windows

Hi, In UNIX, it's very easy to find the duplex speed. But in Windows, is there a easy way to find the duplex speed? I can't go to over 100 servers to find this out, I was wondering if I run one command to do this? Please advice.

7. Solaris

How to find half duplex or full duplex

Hi, How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct? Also let me know how to change from half to full duplex.

8. AIX

How to change Speed Duplex

How to change Speed Duplex ! How to change Speed Duplex by command chdev -P -l ent1 -a media_speed=1000_Full_Duplex How to change Speed Duplex by Smitty . smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ...

9. AIX

Connected and Running with half duplex speed

VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good. Other ethernet adapter in the VIO server are connected and running in Full duplex speed. Please help me find why this shared...

10. Shell Programming and Scripting

Need script help for monitoring duplex settings

So I have a server I am trying to set up a script to send a Wall message notifying of my eth0 nic being set to 100 half duplex instead of 100 full duplex. I know I am trying to read from /etc/sysconfig/network/ifcfg-eth0 to pull the parameters STARTMODE=onboot BOOTPROTO=static...

LEARN ABOUT DEBIAN

lssubsys

LSSUBSYS(1)							 libcgroup Manual						       LSSUBSYS(1)

NAME

       lssubsys - list hierarchies containing given subsystem

SYNOPSIS

       lssubsys  [-m|--mount-points] [-M|--all-mount-points] [controller] [...]
       lssubsys  [-m|--mount-points] [-M|--all-mount-points] [-i|--hierarchies] [-a|--all]
       lssubsys  [-h|--help]

DESCRIPTION

       lssubsys list the hierarchies containing the given subsystem(s). If no subsystem is defined, it displays all mounted hierarchies.

       controller
	      defines the subsystem whose hierarchy is shown.  If this parameter is not used, the command will list all mounted subsystems.

       -m, --mount-points
	      Display mount points. Only the first mount points of shown hierarchies are displayed.

       -M, --all-mount-points
	      Display mount points. All mount points of shown hierarchies are displayed, each on separate line.

       -a, --all
	      Display all subsystems (including unmounted ones).

       -i, --hierarchies
	      Display  the  attached  hierarchy number if the subsystem is in a hierarchy.  If the option -m is also used, the hierarchy number is
	      shown only for unmounted hierarchies.

       -h, --help
	      Display help and exit.

EXAMPLE

       The command lssubsys -am lists all subsystems which are present in the system, mounted ones will be shown with their mount point:
	      $ lssubsys -am
	      ns
	      cpuset
	      cpu,devices
	      cpuacct /cgroup/cpuacct
	      memory /cgroup/memory
	      freezer /cgroup/freezer
	      net_cls /cgroup/net_cls

       The command lssubsys -ami lists all subsystems which are present in the system, mounted subsystems are  listed  with  their  mount  points,
       unmounted ones which are in a hierarchy are listed with their hierarchy number:
	      $ lssubsys -ami
	      ns
	      cpuset 5
	      cpu,devices 6
	      cpuacct /cgroup/cpuacct
	      memory /cgroup/memory
	      freezer /cgroup/freezer
	      net_cls /cgroup/net_cls

SEE ALSO

       lscgroup (1), cgcreate (1), cgdelete (1), cgconfig.conf (5)

Linux								    2009-11-05							       LSSUBSYS(1)

10 More Discussions You Might Find Interesting

1. Solaris

Duplex Settings

Discussion started by: saabir

2. IP Networking

NIC speed 100M/full duplex problem

Discussion started by: AirWalker83

3. HP-UX

command to change duplex settings..

Discussion started by: sag71155

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Discussion started by: hcclnoodles