Solaris 10 Speed and Duplex Settings: bge Post: 302349311

Sponsored Content

Operating Systems Solaris Solaris 10 Speed and Duplex Settings: bge Post 302349311 by brialt1 on Monday 31st of August 2009 03:55:18 PM

08-31-2009

Registered User

Here is the code located in the /platform/sun4u/kernel/drv/bge.conf

Code:

bge-rx-rings            = 1;
bge-tx-rings            = 1;
# interface bge0
name="bge" parent="/pci@0,600000/pci@0/pci@1/pci@0" unit-address="4" \
adv_autoneg_cap=0 adv_1000fdx_cap=1 adv_1000hdx_cap=0 \
adv_100fdx_cap=0 adv_100hdx_cap=0 adv_100T4_cap=0 adv_10fdx_cap=0 \
adv_10hdx_cap=0;

# interface bge1
name="bge" parent="/pci@0,600000/pci@0/pci@1/pci@0" unit-address="4,1" \
adv_autoneg_cap=0 adv_1000fdx_cap=0 adv_1000hdx_cap=0 \
adv_100fdx_cap=1 adv_100hdx_cap=0 adv_100T4_cap=0 adv_10fdx_cap=0 \
adv_10hdx_cap=0;

# interface bge2
name="bge" parent="/pci@0,600000/pci@0/pci@2/pci@0" unit-address="4" \
adv_autoneg_cap=0 adv_1000fdx_cap=1 adv_1000hdx_cap=0 \
adv_100fdx_cap=0 adv_100hdx_cap=0 adv_100T4_cap=0 adv_10fdx_cap=0 \
adv_10hdx_cap=0;

# interface bge3
name="bge" parent="/pci@0,600000/pci@0/pci@2/pci@0" unit-address="4,1" \
adv_autoneg_cap=0 adv_1000fdx_cap=1 adv_1000hdx_cap=0 \
adv_100fdx_cap=0 adv_100hdx_cap=0 adv_100T4_cap=0 adv_10fdx_cap=0 \
adv_10hdx_cap=0;

brialt1

View Public Profile for brialt1

Find all posts by brialt1

10 More Discussions You Might Find Interesting

1. Solaris

Duplex Settings

Hi All I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that. How do I: 1. Check the duplex settings on my eri0 card? 2. Set the...

2. IP Networking

NIC speed 100M/full duplex problem

I have a TOSHIBA AS7000 B150 Sun Box I wanted to run it with 100M/full duplex I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot. set eri:eri_adv_100fdx_cap=1 set eri:eri_adv_100hdx_cap=0 set eri:eri_adv_autoneg_cap=0 But when I...

3. HP-UX

command to change duplex settings..

Hi Folks, I want the command to change the duplex settings of a HP-UX server. Thanks in advance. Sagar.

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Hi there We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is. As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only...

5. UNIX for Advanced & Expert Users

How to set full duplex for solaris 5.5

I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5. #ndd -set /dev/le adv_100fdx_cap 1

6. Infrastructure Monitoring

How to find the duplex speed on Windows

Hi, In UNIX, it's very easy to find the duplex speed. But in Windows, is there a easy way to find the duplex speed? I can't go to over 100 servers to find this out, I was wondering if I run one command to do this? Please advice.

7. Solaris

How to find half duplex or full duplex

Hi, How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct? Also let me know how to change from half to full duplex.

8. AIX

How to change Speed Duplex

How to change Speed Duplex ! How to change Speed Duplex by command chdev -P -l ent1 -a media_speed=1000_Full_Duplex How to change Speed Duplex by Smitty . smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ...

9. AIX

Connected and Running with half duplex speed

VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good. Other ethernet adapter in the VIO server are connected and running in Full duplex speed. Please help me find why this shared...

10. Shell Programming and Scripting

Need script help for monitoring duplex settings

So I have a server I am trying to set up a script to send a Wall message notifying of my eth0 nic being set to 100 half duplex instead of 100 full duplex. I know I am trying to read from /etc/sysconfig/network/ifcfg-eth0 to pull the parameters STARTMODE=onboot BOOTPROTO=static...

LEARN ABOUT NETBSD

acardide

ACARDIDE(4)						   BSD Kernel Interfaces Manual 					       ACARDIDE(4)

NAME

     acardide -- acard IDE disk controllers driver

SYNOPSIS

     acardide* at pci? dev ? function ? flags 0x0000

DESCRIPTION

     The acardide driver supports the following IDE controllers:

	   Acard ATP850U Ultra33

	   Acard ATP860 Ultra66

	   Acard ATP860-A Ultra66

	   Acard ATP865-A Ultra100

     It provides the interface with the hardware for the ata(4) driver.

     The 0x0002 flag forces the acardide driver to disable DMA on chipsets for which DMA would normally be enabled.  This can be used as a debug-
     ging aid, or to work around problems where the IDE controller is wired up to the system incorrectly.

SEE ALSO

     ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

BUGS

     The timings used for the PIO and DMA modes for controllers listed above are for a PCI bus running at 30 or 33 MHz.  This driver may not work
     properly on overclocked systems.

BSD
								 October 24, 2003							       BSD

10 More Discussions You Might Find Interesting

1. Solaris

Duplex Settings

Discussion started by: saabir

2. IP Networking

NIC speed 100M/full duplex problem

Discussion started by: AirWalker83

3. HP-UX

command to change duplex settings..

Discussion started by: sag71155

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Discussion started by: hcclnoodles