08-31-2009
would be helpfull if you post the config file and what you've changed...
10 More Discussions You Might Find Interesting
1. Solaris
Hi All
I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that.
How do I:
1. Check the duplex settings on my eri0 card?
2. Set the... (3 Replies)
Discussion started by: saabir
3 Replies
2. IP Networking
I have a TOSHIBA AS7000 B150 Sun Box
I wanted to run it with 100M/full duplex
I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot.
set eri:eri_adv_100fdx_cap=1
set eri:eri_adv_100hdx_cap=0
set eri:eri_adv_autoneg_cap=0
But when I... (4 Replies)
Discussion started by: AirWalker83
4 Replies
3. HP-UX
Hi Folks,
I want the command to change the duplex settings of a HP-UX server.
Thanks in advance.
Sagar. (2 Replies)
Discussion started by: sag71155
2 Replies
4. Solaris
Hi there
We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is.
As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only... (1 Reply)
Discussion started by: hcclnoodles
1 Replies
5. UNIX for Advanced & Expert Users
I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5.
#ndd -set /dev/le adv_100fdx_cap 1 (6 Replies)
Discussion started by: csreenivas
6 Replies
6. Infrastructure Monitoring
Hi,
In UNIX, it's very easy to find the duplex speed. But in Windows, is there a easy way to find the duplex speed? I can't go to over 100 servers to find this out, I was wondering if I run one command to do this?
Please advice. (2 Replies)
Discussion started by: samnyc
2 Replies
7. Solaris
Hi,
How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct?
Also let me know how to change from half to full duplex. (1 Reply)
Discussion started by: rogerben
1 Replies
8. AIX
How to change Speed Duplex !
How to change Speed Duplex by command
chdev -P -l ent1 -a media_speed=1000_Full_Duplex
How to change Speed Duplex by Smitty .
smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ... (0 Replies)
Discussion started by: ITHelper
0 Replies
9. AIX
VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good.
Other ethernet adapter in the VIO server are connected and running in Full duplex speed.
Please help me find why this shared... (4 Replies)
Discussion started by: mugunthanvh
4 Replies
10. Shell Programming and Scripting
So I have a server I am trying to set up a script to send a Wall message notifying of my eth0 nic being set to 100 half duplex instead of 100 full duplex.
I know I am trying to read from /etc/sysconfig/network/ifcfg-eth0 to pull the parameters
STARTMODE=onboot
BOOTPROTO=static... (6 Replies)
Discussion started by: lutador72
6 Replies
LEARN ABOUT CENTOS
snapper-configs
SNAPPER-CONFIGS(5) Filesystem Snapshot Management SNAPPER-CONFIGS(5)
NAME
snapper-configs - Configuration files for snapper configs
DESCRIPTION
Each file /etc/snapper/configs/* describes a snapper config.
VARIABLES
The following is a list of variables that can be present in the configuration file. Boolean values must be "yes" or "no".
SUBVOLUME=path
Path of the subvolume or mount point.
There is no default value. The value must always be specified.
FSTYPE=value
Filesystem type for the subvolume.
Default value is "btrfs" but it's recommended to always specify the filesystem type.
ALLOW_USERS=users
List of users allowed to operate with the config. The user-names must be separated by spaces. Spaces in usernames can be escaped with a
"".
Default value is "" but "root" is always implicitly included.
ALLOW_GROUPS=groups
List of groups allowed to operate with the config. The group-names must be separated by spaces. Spaces in group-names can be escaped
with a "".
Default value is "".
BACKGROUND_COMPARISON=boolean
Defines whether pre and post snapshots should be compared in the background after creation.
Default value is "no".
NUMBER_CLEANUP=boolean
Defines whether the number cleanup algorithm should be run for the config.
Default value is "no".
NUMBER_MIN_AGE=seconds
Minimal age for snapshots to be deleted by the number cleanup algorithm.
Default value is "1800".
NUMBER_LIMIT=number
Defines how many snapshots the number cleanup algorithm should keep. The youngest snapshots will be kept.
Default value is "50".
TIMELINE_CREATE=boolean
Defines whether hourly snapshots should be created.
Together with the timeline cleanup algorithm this will create a collection of snapshots with more snapshots is the near past and less
snapshots in the far past.
Default value is "no".
TIMELINE_CLEANUP=boolean
Defines whether the timeline cleanup algorithm should be run for the config.
Default value is "no".
TIMELINE_MIN_AGE=seconds
Minimal age for snapshots to be deleted by the timeline cleanup algorithm.
Default value is "1800".
TIMELINE_LIMIT_HOURLY=number
Defines how many hourly snapshots the timeline cleanup algorithm should keep. An hourly snapshots is the first snapshot in an hour. The
youngest hourly snapshots will be kept.
Default value is "10".
TIMELINE_LIMIT_DAILY=number
Defines how many daily snapshots the timeline cleanup algorithm should keep. A daily snapshots is the first snapshot in a day. The
youngest daily snapshots will be kept.
Default value is "10".
TIMELINE_LIMIT_MONTHLY=number
Defines how many daily snapshots the timeline cleanup algorithm should keep. A daily snapshots is the first snapshot in a day. The
youngest daily snapshots will be kept.
Default value is "10".
TIMELINE_LIMIT_YEARLY=number
Defines how many daily snapshots the timeline cleanup algorithm should keep. A daily snapshots is the first snapshot in a day. The
youngest daily snapshots will be kept.
Default value is "10".
EMPTY_PRE_POST_CLEANUP=boolean
Defines whether the empty-pre-post cleanup algorithm should be run for the config.
Default value is "no".
EMPTY_PRE_POST_MIN_AGE=seconds
Minimal age for snapshots to be deleted by the empty-pre-post cleanup algorithm.
Default value is "1800".
HOMEPAGE
http://snapper.io/
AUTHORS
Arvin Schnell <aschnell@suse.de>
SEE ALSO
snapper(8), snapperd(8)
0.1.7 2013-07-09 SNAPPER-CONFIGS(5)