08-31-2009
Thanks for the quick reply, I will be sure to tag my code in the future.
My team does not have access to change the config on the switch (which is currently set to 100 full). In the mean time I have created a startup script in /etc/rc2.d/ to make the changes, though I would still like to know how to make it work with the conifg file.
10 More Discussions You Might Find Interesting
1. Solaris
Hi All
I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that.
How do I:
1. Check the duplex settings on my eri0 card?
2. Set the... (3 Replies)
Discussion started by: saabir
3 Replies
2. IP Networking
I have a TOSHIBA AS7000 B150 Sun Box
I wanted to run it with 100M/full duplex
I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot.
set eri:eri_adv_100fdx_cap=1
set eri:eri_adv_100hdx_cap=0
set eri:eri_adv_autoneg_cap=0
But when I... (4 Replies)
Discussion started by: AirWalker83
4 Replies
3. HP-UX
Hi Folks,
I want the command to change the duplex settings of a HP-UX server.
Thanks in advance.
Sagar. (2 Replies)
Discussion started by: sag71155
2 Replies
4. Solaris
Hi there
We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is.
As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only... (1 Reply)
Discussion started by: hcclnoodles
1 Replies
5. UNIX for Advanced & Expert Users
I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5.
#ndd -set /dev/le adv_100fdx_cap 1 (6 Replies)
Discussion started by: csreenivas
6 Replies
6. Infrastructure Monitoring
Hi,
In UNIX, it's very easy to find the duplex speed. But in Windows, is there a easy way to find the duplex speed? I can't go to over 100 servers to find this out, I was wondering if I run one command to do this?
Please advice. (2 Replies)
Discussion started by: samnyc
2 Replies
7. Solaris
Hi,
How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct?
Also let me know how to change from half to full duplex. (1 Reply)
Discussion started by: rogerben
1 Replies
8. AIX
How to change Speed Duplex !
How to change Speed Duplex by command
chdev -P -l ent1 -a media_speed=1000_Full_Duplex
How to change Speed Duplex by Smitty .
smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ... (0 Replies)
Discussion started by: ITHelper
0 Replies
9. AIX
VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good.
Other ethernet adapter in the VIO server are connected and running in Full duplex speed.
Please help me find why this shared... (4 Replies)
Discussion started by: mugunthanvh
4 Replies
10. Shell Programming and Scripting
So I have a server I am trying to set up a script to send a Wall message notifying of my eth0 nic being set to 100 half duplex instead of 100 full duplex.
I know I am trying to read from /etc/sysconfig/network/ifcfg-eth0 to pull the parameters
STARTMODE=onboot
BOOTPROTO=static... (6 Replies)
Discussion started by: lutador72
6 Replies
LEARN ABOUT SUSE
date::manip::migration5to6
Date::Manip::Migration5to6(3) User Contributed Perl Documentation Date::Manip::Migration5to6(3)
NAME
Date::Manip::Migration5to6 - how to upgrade from 5.xx to 6.00
SYNOPSIS
When upgrading from Date::Manip 5.xx to 6.00, a few changes may be necessary to your scripts.
The Date::Manip::Changes5to6 document lists in more detail the ways in which Date::Manip changed, but very few of these actually entail
changes to your script.
It should be noted that once the changes are made to your script, it will no longer run correctly in 5.xx.
NECESSARY AND SUGGESTED CHANGES
The following changes are necessary, or strongly suggested:
Reading config files with Date_Init
If you use Date_Init to read any config files (if you do business mode calculations, you probably do), you should remove all of the
following config variables from your call to Date_Init:
GlobalCnf=FILE
PersonalCnf=FILE
PathSep=*
IgnoreGlobalCnf=*
PersonalCnfPath=*
and replace them with:
ConfigFile=FILE
where FILE is now the full path to a config file. Also, the ConfigFile argument should be the first argument in Date_Init.
Date_ConvTZ
The Date_ConvTZ function has changed. It should now take 3 arguments:
$date = Date_ConvTZ($date,$from,$to);
If $from is not given, it defaults to the local time zone. If $to is not given, it defaults to the local time zone.
The date is converted from the $from time zone into the $to time zone. Both should be any time zone (or alias) supported by
Date::Manip.
The old $errlevel argument is no longer handled.
ConvTZ and TZ config variables
If you use either the ConvTZ or TZ config variables, you should replace them with either SetDate or ForceDate. See the
Date::Manip::Config document for information.
Other deprecated config variables
Most of the deprecated config variables continue to function (though they will be removed at a future date). These include:
GlobalCnf
IgnoreGlobalCnf
PersonalCnf
PersonalCnfPath
PathSep
TZ
Internal
The following variables have been removed. If you use any of them, you may need to modify your scripts:
ConvTZ
TodayIsMidnight
DeltaSigns
UpdateCurrTZ
today, yesterday, tomorrow
If you parse the strings "today", "yesterday", or "tomorrow" in order to get the time now, or 24 hours in the past/future, this will no
longer work. These strings now refer strictly to the date (so "today" is the current day at midnight, "yesterday" is the previous day
at midnight, etc.).
To get the time now, 24 hours ago, or 24 hours in the future, you would need to parse the strings "now", "-24:00:00", or "+24:00:00"
respectively.
Do not use Memoize
In 5.xx, it was documented that you could use the module Memoize to speed up Date::Manip, especially when sorting dates.
This information is no longer accurate. Using Memoize in conjuction with Date::Manip should have little impact on performance, and may
lead to incorrect results, especially if you change config variables.
Please see the Date::Manip::Changes5to6 (GENERAL CHANGES) document for more information.
If you find other instances where it is necessary to modify your script, please email me so that I can add that information to this
document.
BUGS AND QUESTIONS
Please refer to the Date::Manip::Problems documentation for information on submitting bug reports or questions to the author.
SEE ALSO
Date::Manip - main module documentation
LICENSE
This script is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
AUTHOR
Sullivan Beck (sbeck@cpan.org)
perl v5.12.1 2010-01-12 Date::Manip::Migration5to6(3)