Hi,
I want to know wheather partition size for installation of vio client can be specified on vio server
example
If I am installing vio server on blade with 2*300gb hard disk,after that I want to create 2 vio client (AIX Operating system) wheather I can specify hard disk size while... (1 Reply)
Hello all,
I have been trying to run commands that collect basic info from the VIO's
The issue I am having is setting the env with the "oem_setup_env" after I login as "padmin".
I usually do the following:
ssh server command
ssh root@server date , but I need to login set the env and... (0 Replies)
Hi Guys,
I'm working on building a new 595 machine.. I'm try to achieve high availability for the VIO clients using 2 VIO servers, The ethernet part is satisfied using SEA failover, Now how do I achieve redundancy for the disks, its the servers internal disk attached to the scsi cards...
... (2 Replies)
I am planning carving out dual VIO servers on a P750 based and would like to know how to allocate internal disks to the VIOS. This has 4 internal disks and I would to assign 2 disks to each VIO.
This is what I was thinking of assigning . Any advise?
vio1
U5802.001.9K8H757-P1-C1 PCI-E x8... (17 Replies)
I have same lun (hdisk3) assigned to 2 vios server (dual vio server) and this is mapped to the client lpar. I have sddpcm on the VIO.
On the VIOA, the attributes for fscsi1 and fscsi3 are set to fast_fail and dyntrk is set to yes
Now, if I do a lqueryvg -Atp on the hdisk3, I get a "DISK... (4 Replies)
I am working in AIX. In a P series machine both aix and linux os can install.. specific command is there for aix to list out the vio servers details mapped in a frame(ie. lssrc "IBM.ManagementServer", like that..) is there any command is der to list out vio servers details in linux or how to find... (1 Reply)
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
Hi,
I am facing an issue in vio server. When I run
bosboot -ad /dev/hdisk0
I am getting an error
trustchk: Verification of attributes failed: /usr/sbin/bootinfo
: accessauths
regards,
vjm
Please use code tags next time for your code and data. (8 Replies)
I hope someone has experienced this problem before and can help. I have a P730 (8231-E2D) which is fitted with 8 IBM SAS disks on 2 separate SISSAS controllers. The disk type is ST9146853SS (Seagate SAS 146Gb).
The problem occurs when I try to install the VIO server software at 2.2.3. It... (3 Replies)
We've got two datacenters and in every datacenter 2 VIOs.
The VIO manages the I/O of the LPARs. So: Is it possible to reboot the VIO without shuting down an LPAR:wall: (4 Replies)
Discussion started by: DiViN3
4 Replies
LEARN ABOUT PLAN9
newuser
NEWUSER(8) System Manager's Manual NEWUSER(8)NAME
newuser - adding a new user
SYNOPSIS
rc /sys/lib/newuser
DESCRIPTION
To establish a new user on Plan 9, add the user's name to /adm/users by running the newuser command on the console of the file server (see
users(6) and fs(8)). Next, give the user a password using the changeuser command on the console of the authentication server (see
auth(8)). At this point, the user can bootstrap a terminal using the new name and password. The terminal will only get as far as running
rc, however, as no profile exists for the user.
The rc(1) script /sys/lib/newuser sets up a sensible environment for a new user of Plan 9. Once the terminal is running rc, type
rc /sys/lib/newuser
to build the necessary directories in /usr/$user and create a reasonable initial profile in /usr/$user/lib/profile. The script then runs
the profile which, as its last step, brings up 81/2(1). At this point the user's environment is established and running. (There is no
need to reboot.) It may be prudent at this point to run passwd(1) to change the password, depending on how the initial password was cho-
sen.
The profile built by /sys/lib/newuser looks like this:
bind -a $home/bin/rc /bin
bind -a $home/bin/$cputype /bin
font = /lib/font/bit/pelm/euro.9.font
switch($service){
case terminal
prompt=('term% ' ' ')
fn term%{ $* }
exec 81/2
case cpu
bind -b /mnt/term/mnt/81/2 /dev
prompt=('cpu% ' ' ')
echo -n $sysname > /dev/label
fn cpu%{ $* }
news
case con
prompt=('cpu% ' ' ')
news
}
Sites may make changes to /sys/lib/newuser that reflect the properties of the local environment.
Use the -c option of mail(1) to create a mailbox.
SEE ALSO passwd(1), 81/2(1), namespace(4), users(6), auth(8), fs(8)NEWUSER(8)